Dynamic analysis of rectangular plates crossed by distributed moving loads

2017 ◽  
Vol 23 (9) ◽  
pp. 1291-1302 ◽  
Author(s):  
S Sorrentino ◽  
G Catania
Keyword(s):  
Coupling Effect ◽  
Ritz Method ◽  
Flexural Vibration ◽  
Analytical Form ◽  
Relative Magnitude ◽  
Transverse Displacement ◽  
Rectangular Plates ◽  
Moving Loads ◽  
Railway Bridges ◽  
Parallel Direction

This study investigates the dynamic behaviour of plates crossed by distributed moving gravitational and inertial loads, in the case in which the relative magnitude of the moving mass introduces a coupling effect with the structure, with possible applications to the vibration analysis of railway bridges. A rectangular Kirchhoff plate is considered, simply supported on two opposite edges and free on the other two edges, loaded by a partially distributed mass travelling in the parallel direction with respect to the free edges. The formulation includes damping, and it is accomplished by the Rayleigh–Ritz method, expressing the solution in semi-analytical form. The shape functions for describing the transverse displacement field of the plate are selected as tensor products of linearly independent eigenfunctions of homogeneous uniform beams in flexural vibration, yielding a low-order model with time-dependent coefficients. Numerical examples are then presented and discussed, aimed at investigating the effects of each of the model governing parameters.

Flexural Vibration of In-Plane Loaded Plates with Straight Line/Curved Internal Supports

1993 ◽  
Vol 115 (4) ◽  
pp. 441-447 ◽  
Author(s):  
K. M. Liew ◽  
C. M. Wang
Keyword(s):  
Ritz Method ◽  
Flexural Vibration ◽  
Mode Shapes ◽  
Rectangular Plates ◽  
Internal Support ◽  
Straight Line ◽  
Contour Plots ◽  
Complete Set ◽  
Clamped Edge ◽  
Internal Line Supports

An investigation into the vibration analysis of a class of in-plane loaded rectangular plates with internal supports of arbitrary contour is conducted. Solutions to this vibration problem are obtained based on the pb-2 Rayleigh-Ritz method. The Ritz function for this method is defined as the product of (1) a two-dimensional polynomial function expanded in a new manner, (2) equations of the internal support and (3) equations of the boundary supports each raised to the power of either 0, 1, or 2 corresponding to a free, simply supported or clamped edge, respectively. A comparison study on the convergence between the proposed set of polynomials and mathematically complete set of polynomials is conducted. The simplicity and accuracy of the method are demonstrated by analyzing square plates with either two intersecting internal line supports or a central ring support. The influence of the in-plane loads on the natural frequencies will be studied. Note that this paper presents some first known solutions to in-plane loaded rectangular plates with internal supports of arbitrary contour. The mode shapes for these plates are also presented in contour plots.

scholarly journals Thermal Buckling Analysis of Laminated Composite plates with General Elastic Boundary Supports

2020 ◽  
Vol 26 (3) ◽  
pp. 1-17
Author(s):  
Mohammed Basheer Alabas ◽  
Wedad Ibrahim Majid
Keyword(s):  
Boundary Condition ◽  
Fourier Series ◽  
Plate Theory ◽  
Ritz Method ◽  
Laminated Composite ◽  
Composite Plates ◽  
Thermal Buckling ◽  
Transverse Displacement ◽  
Rectangular Plates ◽  
Elastic Boundary

In this study, the modified Rayleigh-Ritz method and Fourier series are used to determine the thermal buckling behavior of laminated composite thin plates with a general elastic boundary condition applied to in-plane uniform temperature distribution depending upon classical laminated plate theory(CLPT). A generalized procedure solution is developed for the Rayleigh-Ritz method combined with the synthetic spring technique. The transverse displacement of the orthotropic rectangular plates is not a different term as a new shape expansion of trigonometric series. In this solution approach, the plate transverse deflection and rotation due to bending are developed into principle Fourier series with a sufficient smoothness auxiliary polynomial function, the variable of boundary condition can be easily done by only change the boundary spring stiffness of at the all boundaries of laminated composite plate without achieving any replacement to the solution. The accuracy of the current outcome is verified by comparing with the result obtained from other analytical methods in addition to the finite element method (FEM), so the excellent of this technique is proving during numerical examples.

Flexural Vibration of Rectangular Plates with Stiffeners Parallel to the Edges

1963 ◽  
Vol 67 (634) ◽  
pp. 664-668 ◽  
Author(s):  
S. Mahalingam
Keyword(s):  
Natural Frequencies ◽  
Ritz Method ◽  
Flexural Vibration ◽  
Approximate Solutions ◽  
The Other ◽  
Rectangular Plates ◽  
Equivalent System ◽  
Simply Supported ◽  
Finite Difference Equations ◽  
Four Corners

SummaryThe basis of the procedure described in the paper is the replacement of the stiffeners by an approximately equivalent system of line springs. One of two methods may then be used to determine the natural frequencies. A rectangular plate with edge stiffeners, point-supported at the four corners, is used to demonstrate the application of the Rayleigh-Ritz method. Numerical results obtained are compared with known approximate solutions based on finite difference equations. A Holzer-type iteration is employed in the case of a plate with parallel stiffeners, where the two edges perpendicular to the stiffeners are simply supported, the other two edges having any combination of conditions.

THE SELF-DAMPING CHARACTERISTICS OF A MAGNETIC CONSTRAINED FULLY COVERED SANDWICH CANTILEVER BEAM

2005 ◽  
Vol 29 (3) ◽  
pp. 333-341 ◽  
Author(s):  
Ming Li ◽  
Zeng He
Keyword(s):  
Cantilever Beam ◽  
Ritz Method ◽  
Flexural Vibration ◽  
Geometrical Parameters ◽  
Transverse Displacement ◽  
Constrained Layer Damping ◽  
Resonant Frequencies ◽  
Damping Characteristics ◽  
Single Term ◽  
Sandwich Type

The Rayleigh-Ritz method is applied for the damping analysis of flexural vibration of a fully covered double sandwich-type cantilever beam with the attraction arrangement magnets on the constraining layers root. The analysis is carried out in terms of resonant frequencies and associated modal system loss factors. Single-term solutions for respective modes are assumed for the longitudinal displacements of the constraining layer and the transverse displacement of the beam. The modeling is validated experimentally. The improvement of damping characteristics using the magnetic constrained layer damping treatment under different physical and geometrical parameters has been reported.

Sign in / Sign up

Export Citation Format

Share Document