Investigating vibrations of viscoelastic fluid-conveying carbon nanotubes resting on viscoelastic foundation using a nonlocal fractional Timoshenko beam model

Author(s):  
M Faraji Oskouie ◽  
R Ansari ◽  
H Rouhi

On the basis of fractional viscoelasticity, the size-dependent free-vibration response of viscoelastic carbon nanotubes conveying fluid and resting on viscoelastic foundation is studied in this article. To this end, a nonlocal Timoshenko beam model is developed in the context of fractional calculus. Hamilton’s principle is applied in order to obtain the fractional governing equations including nanoscale effects. The Kelvin–Voigt viscoelastic model is also used for the constitutive equations. The free-vibration problem is solved using two methods. In the first method, which is limited to the simply supported boundary conditions, the Galerkin technique is employed for discretizing the spatial variables and reducing the governing equations to a set of ordinary differential equations on the time domain. Then, the Duffing-type time-dependent equations including fractional derivatives are solved via fractional integrator transfer functions. In the second method, which can be utilized for carbon nanotubes with different types of boundary conditions, the generalized differential quadrature technique is used for discretizing the governing equations on spatial grids, whereas the finite difference technique is used on the time domain. In the results, the influences of nonlocality, geometrical parameters, fractional derivative orders, viscoelastic foundation, and fluid flow velocity on the time responses of carbon nanotubes are analyzed.

2013 ◽  
Vol 365-366 ◽  
pp. 1207-1210
Author(s):  
Feng Wang ◽  
Li Na Xu ◽  
Shu Bo Sui

Timoshenko beam model and the meshless method based on thin-plate spline radial basis function are used to analyze the free vibration of carbon nanotubes. The natural frequencies of the carbon nanotubes with different length-to-diameter ratios and boudary conditions are compared with the results of published literatures which demonstrate the high accuracy of present method.


2005 ◽  
Vol 72 (1) ◽  
pp. 10-17 ◽  
Author(s):  
J. Yoon ◽  
C. Q. Ru ◽  
A. Mioduchowski

Short carbon nanotubes of smaller aspect ratio (say, between 10 and 50) are finding significant application in nanotechnology. This paper studies vibration of such short carbon nanotubes whose higher-order resonant frequencies fall within terahertz range. Because rotary inertia and shear deformation are significant for higher-order modes of shorter elastic beams, the carbon nanotubes studied here are modeled as Timoshenko beams instead of classical Euler beams. Detailed results are demonstrated for double-wall carbon nanotubes of aspect ratio 10, 20, or 50 based on the Timoshenko-beam model and the Euler-beam model, respectively. Comparisons between different single-beam or double-beam models indicate that rotary inertia and shear deformation, accounted for by the Timoshenko-beam model, have a substantial effect on higher-order resonant frequencies and modes of double-wall carbon nanotubes of small aspect ratio (between 10 and 20). In particular, Timoshenoko-beam effects are significant for both large-diameter and small-diameter double-wall carbon nanotubes, while double-beam effects characterized by noncoaxial deflections of the inner and outer tubes are more significant for small-diameter than large-diameter double-wall carbon nanotubes. This suggests that the Timoshenko-beam model, rather than the Euler-beam model, is relevant for terahertz vibration of short carbon nanotubes.


2018 ◽  
Vol 25 (1) ◽  
pp. 203-218 ◽  
Author(s):  
Reza Bahaadini ◽  
Ali Reza Saidi ◽  
Mohammad Hosseini

A nonlocal strain gradient Timoshenko beam model is developed to study the vibration and instability analysis of the carbon nanotubes conveying nanoflow. The governing equations of motion and boundary conditions are derived by employing Hamilton’s principle, including the effects of moving fluid, material length scale and nonlocal parameters, Knudsen number and gravity force. The material length scale and nonlocal parameters are considered, in order to take into account the size effects. Also, to consider the small-size effects on the flow field, the Knudsen number is used as a discriminant parameter. The Galerkin approach is chosen to analyze the governing equations under clamped–clamped, clamped–hinged and hinged–hinged boundary conditions. It is found that the natural frequency and critical fluid velocity can be decreased by increasing the nonlocal parameter or decreasing the material length scale parameter. Furthermore, it is revealed that the critical flow velocity does not affected by two size-dependent parameters and various boundary conditions in the free molecular flow regime.


Sign in / Sign up

Export Citation Format

Share Document