viscoelastic foundation
Recently Published Documents


TOTAL DOCUMENTS

202
(FIVE YEARS 57)

H-INDEX

24
(FIVE YEARS 4)

Author(s):  
Mehdi Veisytabar ◽  
Arash Reza ◽  
Younes Shekari

This paper aims to develop a viscoelastic analytical model for adhesively bonded single stepped-lap joints subjected to tensile loading. The adherends are aluminum alloy A6063 and modeled as Timoshenko elastic beams and the adhesive is epoxy type B. A three-parameter fractional viscoelastic foundation (3PFVF) model is proposed to express the governing stresses in the joint and the fractional Zener model is used to model the viscoelastic behavior of the adhesive layer. The proposed 3PFVF model makes it possible to have different peel stresses between the two interfaces of adhesive and adherends. The governing differential equations are derived in the Laplace domain, and then solved and transformed simultaneously in the time domain using the Gaver-Stehfest inverse Laplace transform method. The finite element simulation with ANSYS is applied to validate the proposed method. The results show that a simple fractional viscoelastic model, which has a short differential equation, offers the same results as the classical viscoelastic models, which have higher and more complex differential equations. Moreover, the results show that the maximum shear and peel stresses in the single stepped-lap joints are about 20% less than single-lap joints.


Author(s):  
Zeinab Heidary ◽  
Afsaneh Mojra

Carbon nanotubes (CNTs) have emerged as efficient tools in drug delivery systems; therefore, it is essential to refer to the importance of the magnetic field, in addition to the fluid flow on the dynamic behavior of CNTs. Additionally, in such medical applications, the actual working environment of nanotube often contains temperature changes, and CNTs are surrounded by soft tissues with viscoelastic mechanical properties. In this study, the vibrational behavior of CNTs conveying magnetic-fluid flow and resting on a viscoelastic foundation is investigated under various temperature variations. To incorporate the influence of slip velocity at the nanoscale, a correction factor is employed on the basis of the Beskok–Karniadakis model. The nanotube is modeled by the Euler–Bernoulli beam theory, and governing equations of motion are derived by implementing Hamilton’s principle based on Eringen’s nonlocal elasticity theory. Results indicate that by applying a magnetic field with an intensity of 30[Formula: see text]T, the dimensionless critical flow velocity increases from 4.345 to 12.603. Also, the critical flow velocity shows an increase from 4.345 to 5.854 in the presence of a viscoelastic foundation. Furthermore, a temperature variation equal to 20[Formula: see text]K reduces the critical flow velocity dramatically from 4.345 to 1.802 at low temperatures, while an increase from 4.345 to 5.443 is observed at high temperatures. Consequently, while the magnetic field and the viscoelastic foundation affect the system stability, the temperature variation may improve or deteriorate the stability. Therefore, to plan for a medical application, the inclusion of temperature variation is required.


Structures ◽  
2021 ◽  
Vol 33 ◽  
pp. 2177-2189
Author(s):  
Ismail M. Mudhaffar ◽  
Abdelouahed Tounsi ◽  
Abdelbaki Chikh ◽  
Mohammed A. Al-Osta ◽  
Mesfer M. Al-Zahrani ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document