Influence of Al on strength and impact behaviour of hot rolled plain C–Mn steels

The austenite/pearlite growth interface in a model alloy steel (Fe-1 lMn-0.8C nominal wt%) is being investigated. In this particular alloy pearlite nodules can be grown isothermally in austenite that remains stable at room temperature, thus facilitating examination of the transformation interfaces. This study presents preliminary results of thin foil TEM of the austenite/pearlite interface, as part of a programme of aimed at studying alloy carbide precipitation reactions at this interface which can result in significant strengthening of microalloyed low- and medium- carbon steels L Similar studies of interface structure, made on a partially decomposed high- Mn austenitic alloy, have been reported recently.The experimental alloys were made as 50 g argon arc melts using high purity materials and homogenised. Samples were hot- rolled, swaged and machined to 3mm diameter rod, solution treated at 1300 °C for 1 hr and WQ. Specimens were then solutionised between 1250 °C and 1000 °C and isothermally transformed between 610 °C and 550 °C for 10-18 hr and WQ.

Download Full-text

Ballistic impact behaviour of some ceramics in different environments

Journal de Physique IV (Proceedings) ◽

10.1051/jp4:19948103 ◽

1994 ◽

Vol 04 (C8) ◽

pp. C8-677-C8-682

Author(s):

H.-J. Ernst ◽

K. Hoog ◽

V. Wiesner

Keyword(s):

Ballistic Impact ◽

Impact Behaviour

Download Full-text

Development of trimming technology for hot rolled ultra-low carbon steel

Revue de Métallurgie ◽

10.1051/metal/199390070917 ◽

1993 ◽

Vol 90 (7-8) ◽

pp. 917-922

Author(s):

Y. Matsuda ◽

M. Nishino ◽

J. Ikeda

Keyword(s):

Carbon Steel ◽

Low Carbon Steel ◽

Low Carbon ◽

Ultra Low Carbon Steel ◽

Hot Rolled

Download Full-text

Investigation on the control of multiphase flow behavior in a continuous casting tundish during ladle change

Metallurgical Research & Technology ◽

10.1051/metal/2020070 ◽

2020 ◽

Vol 117 (6) ◽

pp. 619

Author(s):

Rui Xu ◽

Haitao Ling ◽

Haijun Wang ◽

Lizhong Chang ◽

Shengtao Qiu

Keyword(s):

Multiphase Flow ◽

Flow Behavior ◽

Rolled Strip ◽

Impact Zone ◽

Steel Cleanliness ◽

Carry Over ◽

Slag Carry Over ◽

Hot Rolled ◽

Turbulence Inhibitor ◽

The Impact

The transient multiphase flow behavior in a single-strand tundish during ladle change was studied using physical modeling. The water and silicon oil were employed to simulate the liquid steel and slag. The effect of the turbulence inhibitor on the slag entrainment and the steel exposure during ladle change were evaluated and discussed. The effect of the slag carry-over on the water-oil-air flow was also analyzed. For the original tundish, the top oil phase in the impact zone was continuously dragged into the tundish bath and opened during ladle change, forming an emulsification phenomenon. By decreasing the liquid velocities in the upper part of the impact zone, the turbulence inhibitor decreased considerably the amount of entrained slag and the steel exposure during ladle change, thereby eliminating the emulsification phenomenon. Furthermore, the use of the TI-2 effectively lowered the effect of the slag carry-over on the steel cleanliness by controlling the movement of slag droplets. The results from industrial trials indicated that the application of the TI-2 reduced considerably the number of linear inclusions caused by ladle change in hot-rolled strip coils.

Download Full-text

Hot-rolled strip re-reddening temperature changing law for late ultra fast-cooling in a CSP line

Metallurgical Research & Technology ◽

10.1051/metal/2015014 ◽

2015 ◽

Vol 112 (3) ◽

pp. 305 ◽

Cited By ~ 1

Author(s):

Lian-yun Jiang ◽

Guo Yuan ◽

Jian-hui Shi ◽

Yue Xue ◽

Di Wu ◽

...

Keyword(s):

Rolled Strip ◽

Hot Rolled Strip ◽

Ultra Fast Cooling ◽

Fast Cooling ◽

Hot Rolled

Download Full-text

Experimental Study on the Behavior of Hot-Rolled Square Tubular T-Joints under Impact Loadings

International Collaboration in Lifeline Earthquake Engineering 2016 ◽

10.1061/9780784480342.007 ◽

2017 ◽

Author(s):

Pengfei Cui ◽

Fan Chen ◽

Yanzhi Liu ◽

Jingsi Huo

Keyword(s):

Experimental Study ◽

T Joints ◽

Hot Rolled

Download Full-text

Influence of Yield Strength Variability over Cross-Section to Steel Beam Load-Carrying Capacity

Nonlinear Analysis Modelling and Control ◽

10.15388/na.2005.10.2.15129 ◽

2005 ◽

Vol 10 (2) ◽

pp. 151-160 ◽

Cited By ~ 3

Author(s):

J. Kala ◽

Z. Kala

Keyword(s):

Yield Strength ◽

Cross Section ◽

Carrying Capacity ◽

Bending Moment ◽

Statistical Characteristics ◽

Load Carrying Capacity ◽

Load Carrying ◽

Strength Variability ◽

Hot Rolled ◽

Hot Rolled Steel

Authors of article analysed influence of variability of yield strength over cross-section of hot rolled steel member to its load-carrying capacity. In calculation models, the yield strength is usually taken as constant. But yield strength of a steel hot-rolled beam is generally a random quantity. Not only the whole beam but also its parts have slightly different material characteristics. According to the results of more accurate measurements, the statistical characteristics of the material taken from various cross-section points (e.g. from a web and a flange) are, however, more or less different. This variation is described by one dimensional random field. The load-carrying capacity of the beam IPE300 under bending moment at its ends with the lateral buckling influence included is analysed, nondimensional slenderness according to EC3 is λ¯ = 0.6. For this relatively low slender beam the influence of the yield strength on the load-carrying capacity is large. Also the influence of all the other imperfections as accurately as possible, the load-carrying capacity was determined by geometrically and materially nonlinear solution of very accurate FEM model by the ANSYS programme.

Download Full-text