Evaluation of computer-controlled SEM in the study of metal-contaminated soils

2003 ◽  
Vol 67 (2) ◽  
pp. 219-231 ◽  
Author(s):  
H. W. Langmi ◽  
J. Watt
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Contaminated Soils ◽  
X Ray ◽  
Computer Controlled ◽  
Weathering Crusts ◽  
Individual Particles ◽  
Element Mapping ◽  
Scanning Electron

Computer-controlled scanning electron microscopy (CCSEM) has been assessed for the determination of form and size distribution of heavy metals in urban contaminated soils. Metal distributions within individual particles were determined using X-ray element mapping. The sites selected for study were (1) around a landfill site, previously a colliery in Wolverhampton, UK and (2) a private garden adjacent to a railway in Nottingham, UK. Backscattered thresholding techniques were used to isolate the Pb-containing categories. The classification results for both Wolverhampton and Nottingham soils were generally similar but more Pb-containing classes were observed for the Nottingham samples when a comparison was made between results of the same size fractions. However, difficulties with the technique arose when particles showing chemically similar weathering crusts were assigned to the same class, despite having different internal compositions. The CCSEM data therefore need to be interpreted with caution and their application limited to situations in which particle internal complexity is not an issue.

scholarly journals The use of scanning electron microscopy to the study of the painting from the Church in Radcze

2013 ◽  
Vol 12 (4) ◽  
pp. 095-105
Author(s):  
Beata Klimek
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Electron Microscope ◽  
Historic Buildings ◽  
X Ray ◽  
Composition And Structure ◽  
The Church ◽  
Diagnosis Technique ◽  
Scanning Electron

One of the main tasks in the study of historic buildings is the need to identify the original materials and extensions, which often have historic character. The next task concerns the determination of the composition and structure of the historical, diagnosis technique to develop original paint. The article presents the preliminary results of paintings. Methods were used with the scanning electron microscope was equipped with an energy dispersive X-ray spectrometer (SEM-EDS).

Study of an Energetic-oxidant Co-crystal: Preparation, Characterisation, and Crystallisation Mechanism

2017 ◽  
Vol 67 (5) ◽  
pp. 510 ◽  
Author(s):  
Han Gao ◽  
Wei Jiang ◽  
Jie Liu ◽  
Gazi Hao ◽  
Lei Xiao ◽  
...  
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Differential Scanning Calorimetry ◽  
Diffraction Spectrum ◽  
Solvent Evaporation Method ◽  
X Ray Diffraction ◽  
Scanning Calorimetry ◽  
X Ray ◽  
Scanning Electron

<p>An energetic co-crystal consisting of the most promising military explosive 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane (CL-20) and the most well-known oxidant applied in propellants ammonium perchlorate has been prepared with a simple solvent evaporation method. Scanning electron microscopy revealed that the morphology of co-crystal differs greatly from each component. The X-ray diffraction spectrum, FTIR, Raman spectra, and differential scanning calorimetry characterisation further prove the formation of the co-crystal. The result of determination of hygroscopic rate indicated the hygroscopicity was effectively reduced. At last, the crystallisation mechanism has been discussed.</p>

scholarly journals Understanding the Mechanism of Arsenic Mobilisation and Behaviour in Tailings Dams

2017 ◽  
Vol 17 (1) ◽  
pp. 85-89
Author(s):  
B. Koomson ◽  
E. K. Asiam ◽  
W. Skinner ◽  
J. Addai-Mensah
Keyword(s):  
Electron Microscopy ◽  
Heavy Metals ◽  
Scanning Electron Microscopy ◽  
Chemical Composition ◽  
Energy Dispersive Spectroscopy ◽  
X Ray ◽  
Tailings Dams ◽  
Higher Temperature ◽  
Lower Temperature ◽  
Scanning Electron

This study was carried out on leaching of tailings at 30 ᵒC and 40 ᵒC. The mineralogical and chemical composition of the tailings material were determined by Quantitative X-Ray Diffractometry (QXRD) and Scanning Electron Microscopy combined with Energy Dispersive Spectroscopy (SEM-EDAX). The study revealed that the tailings contain sulphides (arsenopyrite and pyrite) which can leach to produce arsenic (As) and other ions in solution. The acid released during leaching depends on the temperature of leaching. More acid was produced at higher temperature (40 ᵒC) than lower temperature (30 ᵒC). It was established that arsenic precipitation from solution was higher at higher temperature (40 ᵒC) than lower temperature (30 ᵒC). Mimicking the study in a typical tailings environment, it could be proposed that As mobilisation will be enhanced at lower temperature (30 ᵒC) than at higher temperature (40 ᵒC). Keywords: Tailings, Leaching, Arsenopyrite, Heavy metals and Temperature

Preparation of Functionalized Hollow ZnS Microspheres and their Analytical Application

2012 ◽  
Vol 151 ◽  
pp. 281-285
Author(s):  
Shi Jie Chen ◽  
Ying Jie Li ◽  
Ren Jiang Lü ◽  
Peng Wang
Keyword(s):  
Electron Microscopy ◽  
Scanning Electron Microscopy ◽  
Transmission Electron Microscopy ◽  
Ph Value ◽  
Fluorescence Probes ◽  
Optimum Conditions ◽  
X Ray ◽  
Transmission Electron ◽  
Scanning Electron

Hollow ZnS microsphere were prepared by hydrothermal method and modified with L-Cysteine. The functionalized hollow ZnS microspheres were characterized using transmission electron microscopy(TEM), field-emission scanning electron microscopy(FESEM), X-ray diffractometer (XRD) and photoluminescence spectroscopy. They were used as fluorescence probes in the determination of ciprofloxacin. The pH value of the system was selected at pH 8.5 with excitation and emission wavelength at 270 nm and 423 nm. Under the optimum conditions, the fluorescence of hollow functionalized ZnS microspheres was enhanced by ciprofloxacin. The responses are linearly proportional to the concentrations of ciprofloxacin, the linear range of calibration curve is 0.20 µg•L-1–870 µg•L-1 for ciprofloxacin, the detection limit is 0.06 µg•L-1.

Sign in / Sign up

Export Citation Format

Share Document