Vanadoallanite-(La): a new epidote-supergroup mineral from Ise, Mie Prefecture, Japan

2013 ◽  
Vol 77 (6) ◽  
pp. 2739-2752 ◽  
Author(s):  
M. Nagashima ◽  
D. Nishio-Hamane ◽  
N. Tomita ◽  
T. Minakawa ◽  
S. Inaba

AbstractThe new mineral, vanadoallanite-(La), found in the stratiform ferromanganese deposit from the Shobu area, Ise City, Mie Prefecture, Japan, was studied using electron microprobe analysis and single-crystal X-ray diffraction methods. Vanadoallanite-(La) is a rare-earth element-rich monoclinic epidote-supergroup mineral with simplified formula CaLaV3+AlFe2+(SiO4)(Si2O7)O(OH) (Z = 2, space group P21/m) characterized by predominantly V3+ at one of three octahedral sites, M1. The crystal studied shows large V (∼8.4 V2O3 wt.%), Fe (∼13.8 Fe2O3 wt.%; Fe2+/total Fe = 0.58) and Mn (∼8.8 MnO wt.%) contents. A small amount of Ti is also present (∼1.3 TiO2 wt.%). Structural refinement converged to R1 = 2.96%. The unit-cell parameters are a = 8.8985(2), b = 5.7650(1), c = 10.1185(2) Å, β = 114.120(1)° and V = 473.76(2) Å3. The cation distributions determined at A1,A2 and M3 are Ca0.61Mn0.39, (La0.46Ce0.14Pr0.07Nd0.18)Σ0.85Ca0.15 and Fe2+0.56Mn2+0.30Mg0.06V3+0.05Fe3+0.03, respectively. On the other hand, depending on Ti assignment, two different schemes of the cation distribution at M1 and M2 can be considered: (1) M1(V3+0.58Fe3+0.34Ti4+0.08) M2(Al0.92Fe3+0.08), and (2) M1(V3+0.58Fe3+0.42)M2(Al0.92Ti4+0.08). In both cases, the dominant cations at A1, A2, M1, M2 and M3 are Ca, La, V3+, Al and Fe2+ , respectively. According to ionic radius, Ti4+ possibly prefers M2 rather than Fe3+. A large Mn2+ content at A1 also characterizes our vanadoallanite-(La). The structural change of Mn2+-rich allanite-group minerals is considered to be controlled by two main factors. One is the large Mn2+ content at A1 in vanadoallanite-(La), which modifies the topology of the A1O9 polyhedron. The other is the expansion of M3O6 and M1O6 octahedra caused by large octahedral cations, such as Fe2+ and Mn2+, at M3 and the trivalent transition elements, V3+ and Fe3+, at M1.

2014 ◽  
Vol 70 (a1) ◽  
pp. C1095-C1095
Author(s):  
Marcelo Andrade ◽  
Javier Ellena ◽  
Daniel Atencio

Fluorcalciomicrolite, Ca1.5Ta2O6F, and hydroxycalciomicrolite, Ca1.5Ta2O6(OH), are new microlite-group [1] minerals found in the Volta Grande pegmatite, Nazareno, Minas Gerais, Brazil. Both occur as octahedral and rhombododecahedral crystals. The crystals are colourless, yellow and translucent, with vitreous to resinous luster. The densities calculated for fluorcalciomicrolite [2] and hydroxycalciomicrolite are 6.160 and 6.176 g/cm3, respectively. The empirical formulae obtained from electron microprobe analysis are (Ca1.07Na0.81□0.12)Σ2(Ta1.84Nb0.14Sn0.02)Σ2[O5.93(OH)0.07]Σ6.00[F0.79(OH)0.21] for fluorcalciomicrolite and (Ca1.48Na0.06Mn0.01)Σ1.55(Ta1.88Nb0.11Sn0.01)Σ2O6[(OH)0.76F0.20O0.04] for hydroxycalmicrolite. Fluorcalciomicrolite is cubic, space group Fd-3m, a = 10.4191(6) Å, V = 1131.07(11) Å3, and Z = 8. Hydroxycalciomicrolite is also cubic; however, the presence of P-lattice is confirmed by the large number of weak reflections observed by X-ray diffraction. As a result, the space group is P4332 and unit-cell parameters are a = 10.4211(8) Å, and V = 1131.72(15) Å3.


Author(s):  
Dan Holtstam ◽  
Luca Bindi ◽  
Paola Bonazzi ◽  
Hans-Jürgen Förster ◽  
Ulf B. Andersson

ABSTRACT Arrheniusite-(Ce) is a new mineral (IMA 2019-086) from the Östanmossa mine, one of the Bastnäs-type deposits in the Bergslagen ore region, Sweden. It occurs in a metasomatic F-rich skarn, associated with dolomite, tremolite, talc, magnetite, calcite, pyrite, dollaseite-(Ce), parisite-(Ce), bastnäsite-(Ce), fluorbritholite-(Ce), and gadolinite-(Nd). Arrheniusite-(Ce) forms anhedral, greenish-yellow translucent grains, exceptionally up to 0.8 mm in diameter. It is optically uniaxial (–), with ω = 1.750(5), ε = 1.725(5), and non-pleochroic in thin section. The calculated density is 4.78(1) g/cm3. Arrheniusite-(Ce) is trigonal, space group R3m, with unit-cell parameters a = 10.8082(3) Å, c = 27.5196(9) Å, and V = 2784.07(14) Å3 for Z = 3. The crystal structure was refined from X-ray diffraction data to R1 = 3.85% for 2286 observed reflections [Fo > 4σ(Fo)]. The empirical formula for the fragment used for the structural study, based on EPMA data and results from the structure refinement, is: (Ca0.65As3+0.35)Σ1(Mg0.57Fe2+0.30As5+0.10Al0.03)Σ1[(Ce2.24Nd2.13La0.86Gd0.74Sm0.71Pr0.37)Σ7.05(Y2.76Dy0.26Er0.11Tb0.08Tm0.01Ho0.04Yb0.01)Σ3.27Ca4.14]Σ14.46(SiO4)3[(Si3.26B2.74)Σ6O17.31F0.69][(As5+0.65Si0.22P0.13)Σ1O4](B0.77O3)F11; the ideal formula obtained is CaMg[(Ce7Y3)Ca5](SiO4)3(Si3B3O18)(AsO4)(BO3)F11. Arrheniusite-(Ce) belongs to the vicanite group of minerals and is distinct from other isostructural members mainly by having a Mg-dominant, octahedrally coordinated site (M6); it can be considered a Mg-As analog to hundholmenite-(Y). The threefold coordinated T5 site is partly occupied by B, like in laptevite-(Ce) and vicanite-(Ce). The mineral name honors C.A. Arrhenius (1757–1824), a Swedish officer and chemist, who first discovered gadolinite-(Y) from the famous Ytterby pegmatite quarry.


2013 ◽  
Vol 28 (S1) ◽  
pp. S28-S31 ◽  
Author(s):  
L. Fu ◽  
Y.Q. Guo ◽  
S. Zheng

Cu(In,Ga)Se2 (CIGS) semiconductors were prepared by arc melting and the vacuum solid reaction. CIGS nanoparticles were synthesized by the mechanical alloy method. The influences of various ball-milling speeds on phase structures for CIGS nanoparticles were investigated by X-ray diffraction (XRD) and scanning electron microscopy (SEM). The crystal structures and unit-cell parameters of CIGS nanoparticles were determined using TREOR program and the least squares method. A Rietveld structural refinement was used to determine the atomic occupations and atomic numbers of CIGS prepared under various ball-milling speeds. The least size of agglomerated CIGS nanoparticles should be around 200 nm. CIGS nanoparticles milled at various milling speeds with a tetragonal chalcopyrite structure were obtained according to XRD analyses. However, Ga content in CIGS depends on milling speeds. Based on the structural refinements, the unit-cell parameters are a = 5.693(8)–5.744(9) Å and c = 11.334(9)–11.524(4) Å with gallium content ranging from 0.3 to 0.5. The atomic occupations are corresponding to the 4a crystal site for Cu atoms, the 4b site for In and the 8d site for Se. Ga prefers to occupy the 4b crystal site.


2018 ◽  
Vol 82 (1) ◽  
pp. 189-198
Author(s):  
Roberta Oberti ◽  
Massimo Boiocchi ◽  
Frank C. Hawthorne ◽  
Marco E. Ciriotti ◽  
Olav Revheim ◽  
...  

ABSTRACTClino-suenoite, ideally □${\rm Mn}_{2}^{2 +} $Mg5Si8O22(OH)2 is a new amphibole of the magnesium-iron-manganese subgroup of the amphibole supergroup. The type specimen was found at the Lower Scerscen Glacier, Valmalenco, Sondrio, Italy, where it occurs in Mn-rich quartzite erratics containing braunite, rhodonite, spessartine, carbonates and various accessory minerals. The empirical formula derived from electron microprobe analysis and single-crystal structure refinement is: ANa0.04B(${\rm Mn}_{1.58}^{2 +} $Ca0.26Na0.16)Σ2.00C(Mg4.21${\rm Mn}_{0. 61}^{2 +} {\rm Fe}_{0.04}^{2 +} $Zn0.01Ni0.01${\rm Fe}_{0.08}^{3 +} $Al0.04)Σ5.00TSi8.00O22W[(OH1.94F0.06)]Σ=2.00. Clino-suenoite is biaxial (+), with α = 1.632(2), β = 1.644(2), γ = 1.664(2) and 2Vmeas. = 78(2)° and 2Vcalc. = 76.3°. The unit-cell parameters in the C2/m space group are a = 9.6128(11), b = 18.073(2), c = 5.3073(6) Å, β = 102.825(2)° and V = 899.1(2) Å3 with Z = 2. The strongest ten reflections in the powder X-ray diffraction pattern [d (in Å), I, (hkl)] are: 2.728, 100, (151); 2.513, 77, ($\bar 2$02); 3.079, 62, (310); 8.321, 60, (110); 3.421, 54, (131); 2.603, 42, (061); 2.175, 42, (261); 3.253, 41, (240); 2.969, 40, (221); 9.036, 40, (020).


Minerals ◽  
2021 ◽  
Vol 11 (12) ◽  
pp. 1409
Author(s):  
Gerson A. C. Lopes ◽  
Daniel Atencio ◽  
Javier Ellena ◽  
Marcelo B. Andrade

The roméite-group is part of the pyrochlore-supergroup and comprises cubic oxides of A2B2X6Y formula in which Sb5+ predominates in the B-site. The A and Y main occupants determine different minerals in the group and are important for the discovery of new mineral species. Two different roméite-group mineral samples were analysed by electron microprobe analysis (EMPA), Raman spectroscopy and single-crystal X-ray diffraction (XRD). The first sample is from Prabornaz Mine (locality of the original roméite), Saint Marcel, Valle d’Aosta, Italy, whereas the other one occurs in Kalugeri Hill, Babuna Valley, Jakupica Mountains, Nezilovo, Veles, Macedonia. Sample 1 was identified as fluorcalcioroméite, and sample 2 as hydroxycalcioroméite. Both samples belong to the cubic crystal system, space group Fd3¯m, Z = 8, where a = 10.2881(13) Å, V = 1088.9(4) Å3 for sample 1, and a = 10.2970(13) Å, V = 1091.8(4) Å3 for sample 2. The crystal structure refinements converged to (1) R1 = 0.016, wR2 = 0.042; and (2) R1 = 0.023, wR2 = 0.049. Bond-valence calculations validated the crystal structure refinements determining the correct valences at each crystallographic site. Discrepancies observed in the Sb5+ bond-valence calculations were solved with the use of the proper bond valence parameters. The resulting structural formulas are (Ca1.29Na0.55□0.11Pb0.05)Σ=2.00(Sb1.71Ti0.29)Σ=2.00[O5.73(OH)0.27]Σ=6.00[F0.77O0.21(OH)0.02]Σ=1.00 for sample 1, and (Ca1.30Ce0.51□0.19)Σ=2.00(Sb1.08Ti0.92)Σ=2.00O6.00[(OH)0.61O0.21F0.18]Σ=1.00 for sample 2. The Raman spectra of the samples exhibited the characteristic bands of roméite-group minerals, the most evident corresponding to the Sb-O stretching at around 510 cm−1.


2020 ◽  
Vol 9 ◽  
pp. 19-25
Author(s):  
R. K. Rastsvetaeva ◽  
◽  
N. V. Chukanov ◽  
Ch. Schäfer ◽  

Minerals of the eudialyte group from ultra-agpaitic associations are often characterized by high contents (up to the dominance) of sodium at the M2 site, which is populated with iron in eudialyte. The features of blocky isomorphism with the replacement of IVFe2+ by IVNa and VNa at the M2 micro-region are discussed. Using the methods of electron probe microanalysis, X-ray diffraction and IR spectroscopy, a potentially new mineral, M2Na-dominant analogue of eudialyte from the Ilimaussaq alkaline massif (Greenland), was investigated. Its crystal structure was refined to R = 5.6 % in the anisotropic approximation of atomic displacements using 1095 independent reflections with F > 3(F). The unit-cell parameters are: a = 14.208(1), c = 30.438(1) Å, V = 5321(1) Å3; the space group is R-3m. The idealized formula of the mineral is (Z = 3): (Na,H3O)15Ca6Zr3[Na2Fe][Si26O72](OH)2Cl∙2H2O.


2021 ◽  
Vol 33 (6) ◽  
pp. 717-726
Author(s):  
Daniela Mauro ◽  
Cristian Biagioni ◽  
Federica Zaccarini

Abstract. Gersdorffite, ideally NiAsS, and associated minerals from Contrada Zillì (Peloritani Mountains, Sicily, Italy) have been characterized through electron microprobe analysis and X-ray diffraction. Primary minerals, hosted in quartz veins, are represented by gersdorffite, tetrahedrite-(Fe), and chalcopyrite with minor pyrite and galena. Rare aikinite inclusions were observed in tetrahedrite-(Fe) and chalcopyrite. Gersdorffite occurs as euhedral to subhedral crystals, up to 1 mm in size, with (Sb,Bi)-enriched cores and (Fe,As)-enriched rims. Its chemical composition is (Ni0.79−0.95Fe0.18−0.04Co0.04−0.01)(As0.90−1.03Sb0.10−0.00Bi0.02−0.00)S0.98−0.92. It crystallizes in the space group P213, with unit-cell parameters a=5.6968(7) Å, V=184.88(7) Å3, and Z=4, and its crystal structure was refined down to R1= 0.035. Associated tetrahedrite-(Fe) has chemical formula (Cu5.79Ag0.07)Σ5.86(Cu3.96Fe1.59Zn0.45)Σ6.00(Sb3.95As0.17Bi0.03)Σ4.15S13.06, with unit-cell parameters a= 10.3815(10) Å, V=1118.9(3) Å3, and space group I-43m. Its crystal structure was refined to R1=0.027. Textural and crystallographic data suggest a polyphasic crystallization of gersdorffite under low-temperature conditions.


Crystals ◽  
2020 ◽  
Vol 10 (9) ◽  
pp. 806 ◽  
Author(s):  
Veronica Paterlini ◽  
Marco Bettinelli ◽  
Rosanna Rizzi ◽  
Asmaa El Khouri ◽  
Manuela Rossi ◽  
...  

Luminescence properties of europium-doped Ca10-xEux(PO4)6(OH)2 (xEu = 0, 0.01, 0.02, 0.10 and 0.20) and gadolinium-doped hydroxyapatite Ca9.80Gd0.20(PO4)6(OH)2 (HA), synthesized via solid-state reaction at T = 1300 °C, were investigated using scanning electron microscopy (SEM), powder X-ray diffraction (PXRD), Fourier transform infrared (FTIR), and luminescence spectroscopy. Crystal structure characterization (from unit cell parameters determination to refined atomic positions) was achieved in the P63/m space group. FTIR analyses show only slight band shifts of (PO4) modes as a function of the rare earth concentration. Structural refinement, achieved via the Rietveld method, and luminescence spectroscopy highlighted the presence of dopant at the Ca2 site. Strong luminescence was observed for all Eu- and Gd-doped samples. Our multi-methodological study confirms that rare-earth (RE)-doped synthetic hydroxyapatites are promising materials for bio-imaging applications.


2021 ◽  
Vol 59 (4) ◽  
pp. 781-796
Author(s):  
Frédéric Hatert ◽  
Edward S. Grew ◽  
Pietro Vignola ◽  
Nicola Rotiroti ◽  
Fabrizio Nestola ◽  
...  

ABSTRACT The crystal chemistries of five samples of minerals belonging to the fillowite group were structurally investigated: (A) fillowite from the Buranga pegmatite, Rwanda; (B) fillowite from the Kabira pegmatite, Uganda; (C) johnsomervilleite from Loch Quoich, Scotland; (D) johnsomervilleite from the Malpensata pegmatite, Italy; and (E) chladniite from the Sapucaia pegmatite, Minas Gerais, Brazil. Their crystal structures were refined in space group R (No. 148), using single-crystal X-ray diffraction data, to R1 values of (A) 3.79%, (B) 3.52%, (C) 4.14%, (D) 4.04%, and (E) 5.59%. Unit-cell parameters are: (A) a = 15.122(1), c = 43.258(4) Å; (B) a = 15.125(1), c = 43.198(3) Å; (C) a = 15.036(2), c = 42.972(9) Å; (D) a = 15.090(2), c = 43.050(9) Å; and (E) a = 15.1416(6), c = 43.123(2) Å. The asymmetric unit contains 15 cation sites with coordinations ranging from V to IX, as well as six P sites. The complex structure can be split into three types of chains running parallel to the c axis. These chains are composed of edge- and face-sharing polyhedra. Detailed cation distributions were determined for all five samples, and their comparison allowed us to establish the general formula A3BC11(PO4)9 for fillowite-type phosphates, where A represents the group of sites mainly occupied by Na, B the Ca sites, and C the sites containing the divalent cations Fe2+, Mn, and Mg. This formula was accepted by the CNMNC, and the four valid mineral species occurring in the fillowite group are fillowite (C = Mn), johnsomervilleite (C = Fe2+), chladniite (C = Mg), and galileiite (B and C = Fe2+). Stornesite-(Y) is discredited, since this mineral corresponds to Y-bearing chladniite.


2005 ◽  
Vol 69 (2) ◽  
pp. 145-153 ◽  
Author(s):  
R. S. W. Braithwaite ◽  
R. G. Pritchard ◽  
W. H. Paar ◽  
R. A. D. Pattrick

AbstractTiny green crystals from Kabwe, Zambia, associated with hopeite and tarbuttite (and probably first recorded in 1908 but never adequately characterized because of their scarcity) have been studied by X-ray diffraction, microchemical and electron probe microanalysis, infrared spectroscopy, and synthesis experiments. They are shown to be orthorhombic, stoichiometric CuZnPO4OH, of species rank, forming the end-member of a solid-solution series to libethenite, Cu2PO4OH, and are named zincolibethenite. The libethenite structure is unwilling to accommodate any more Zn substituting for Cu at atmospheric pressure, syntheses using Zn-rich solutions precipitating a mixture of zincolibethenite with hopeite, Zn3(PO4)2.4H2O. Single-crystal X-ray data confirm that the Cu(II) occupies the Jahn-Teller distorted 6-coordinate cation site in the libethenite lattice, and the Zn(II) occupies the 5-coordinate site. The space group of zincolibethenite is Pnnm, the same as that of libethenite, with unit-cell parameters a = 8.326, b = 8.260, c = 5.877 Å , V = 404.5 Å 3, Z = 4, calculated density = 3.972 g/cm3 (libethenite has a = 8.076, b = 8.407, c = 5.898 Å , V = 400.44 Å 3, Z = 4, calculated density = 3.965 g/cm3). Zincolibethenite is biaxial negative, with 2Vα(calc.) of 49°, r<v, and α = 1.660, β = 1.705, and γ = 1.715 The mineral is named for its relationship to libethenite.


Sign in / Sign up

Export Citation Format

Share Document