3-D structure below Ävrö Island from high‐resolution reflection seismic studies, southeastern Sweden

Geophysics ◽  
1999 ◽  
Vol 64 (3) ◽  
pp. 662-667 ◽  
Author(s):  
Christopher Juhlin ◽  
Hans Palm
Keyword(s):  
Seismic Reflection ◽  
Fracture Zones ◽  
The South ◽  
North West ◽  
Reflection Seismic ◽  
Site Investigations ◽  
Seismic Reflection Method ◽  
Shot Point ◽  
Crystalline Crust ◽  
A Charge

Two 1-km-long perpendicular seismic reflection lines were acquired on Ävrö Island, southeast Sweden, in October 1996 in order to (1) test the seismic reflection method for future site investigations, (2) map known fracture zones, and (3) add to the Swedish database of reflection seismic studies of the shallow crystalline crust. An east‐west line was shot with 5-m geophone and shot point spacing, and a north‐south line was shot with 10-m geophone and shotpoint spacing. An explosive source with a charge size of 100 g was used along both lines. The data clearly image three major dipping reflectors and one subhorizontal one in the upper 200 ms (600 m). The dipping reflectors (to the south, east, and north‐west) intersect or project to the surface at or close to where surface‐mapped fracture zones exist. The south‐dipping reflector correlates with the top of a heavily fractured interval observed in a borehole (KAV01) at about 400 m. The subhorizontal zone at about 100–200 m correlates with a known fracture zone in the same borehole (KAV01). 3-D effects are apparent in the data, and only where the profiles cross can the true orientation of the reflecting events be determined. To properly orient and locate all events observed on the lines requires acquisition of 3-D data.

Rift processes in the Westralian Superbasin, North West Shelf, Australia: insights from 2D deep reflection seismic interpretation and potential fields modelling

2015 ◽  
Vol 55 (2) ◽  
pp. 400 ◽  
Author(s):  
Catherine Belgarde ◽  
Gianreto Manatschal ◽  
Nick Kusznir ◽  
Sonia Scarselli ◽  
Michal Ruder
Keyword(s):  
Seismic Reflection ◽  
Potential Fields ◽  
Moho Depth ◽  
Late Permian ◽  
Forward Modelling ◽  
Seismic Reflection Data ◽  
North West ◽  
Reflection Seismic ◽  
The North ◽  
Reflection Data

Acquisition of long-offset (8–10 km), long-record length (12–18 sec), 2D reflection seismic and ship-borne potential fields data (WestraliaSpan by Ion/GXT and New Dawn by PGS) on the North West Shelf of Australia provide the opportunity to study rift processes in the context of modern models for rifted margins (Manatschal, 2004). Basement and Moho surfaces were interpreted on seismic reflection data. Refraction models from Geoscience Australia constrain Moho depth and initial densities for gravity modelling through standard velocity-density transformation. 2D joint inversion of seismic reflection and gravity data for Moho depth and basement density constrain depth to basement on seismic. 2D gravity and magnetic intensity forward modelling of key seismic lines constrain basement thickness, type and density. Late Permian and Jurassic-Early Cretaceous rift zones were mapped on seismic reflection data and constrained further by inversion and forward modelling of potential fields data. The Westralian Superbasin formed as a marginal basin in Eastern Gondwana during the Late Permian rifting of the Sibumasu terrane. Crustal necking was localised along mechanically-weak Proterozoic suture belts or Early Paleozoic sedimentary basins (such as Paterson and Canning). Mechanically-strong cratons (such as Pilbara and Kimberley) remained intact, resulting in necking and hyper-extension at their edges. Late Permian hyper-extended areas (such as Exmouth Plateau) behaved as mechanically-strong blocks during the Jurassic to Early Cretaceous continental break-up. Late Permian necking zones were reactivated as failed-rift basins and localised the deposition of the Jurassic oil-prone source rocks that have generated much of the oil discovered on the North West Shelf.

scholarly journals High resolution reflection seismic profiling over the Tjellefonna fault in the Møre-Trøndelag Fault Complex, Norway

2012 ◽  
Vol 4 (1) ◽  
pp. 241-278 ◽  
Author(s):  
E. Lundberg ◽  
C. Juhlin ◽  
A. Nasuti
Keyword(s):  
P Wave ◽  
The South ◽  
Seismic Profiles ◽  
Surface Geometry ◽  
Secondary Fracture ◽  
Near Surface ◽  
North West ◽  
Reflection Seismic ◽  
North East ◽  
The North

Abstract. The Møre-Trøndelag Fault Complex (MTFC) is one of the most prominent fault zones of Norway, both onshore and offshore. In spite of its importance, very little is known of the deeper structure of the individual fault segments comprising the fault complex. Most seismic lines have been recorded offshore or focused on deeper structures. This paper presents results from two reflection seismic profiles, located on each side of the Tingvollfjord, acquired over the Tjellefonna fault in the south-eastern part of the MTFC. Possible kilometer scale vertical offsets reflecting, large scale north-west dipping normal faulting separating the high topography to the south-east from lower topography to the north-west have been proposed for the Tjellefonna fault. In this study, however, the Tjellefonna fault is interpreted to dip approximately 50–60° towards the south-east to depths of at least 1.4 km. Travel-time modeling of reflections associated with the fault was used to establish the geometry of the fault structure at depth and detailed analysis of first P-wave arrivals in shot-gathers together with resistivity profiles were used to define the near surface geometry of the fault zone. A continuation of the structure on the north-eastern side of the Tingvollfjord is suggested by correlation of an in strike direction P-S converted reflection (generated by a fracture zone) seen on the reflection data from that side of the Tingvollfjord. The reflection seismic data correlate well with resistivity profiles and recently published near surface geophysical data. A highly reflective package forming a gentle antiform structure was also identified on both seismic profiles. The structure may be an important boundary within the gneissic basement rocks of the Western Gneiss Region. The Fold Hinge Line is parallel with the Tjellefonna fault trace while the topographic lineament diverges, following secondary fracture zones towards north-east.

Constraints on Reelfoot Rift Evolution from a Reflection Seismic Profile in the Northern Rift

1992 ◽  
Vol 63 (3) ◽  
pp. 233-241 ◽  
Author(s):  
M.B. Goldhaber ◽  
C.J. Potter ◽  
C.D. Taylor
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Seismic Profile ◽  
Fault System ◽  
Seismic Reflection Profile ◽  
The South ◽  
Dome A ◽  
Reflection Seismic ◽  
The North ◽  
Northwestern Margin

Abstract An 82.8 km segment of a northwest-southeast trending seismic-reflection profile across the northernmost part of the Reelfoot rift shows that the Cambrian rift geometry there is quite distinct from that of the main part of Reelfoot rift to the south, and that of the Rough Creek graben to the east. The profile is within the area of intersection of the Reelfoot rift and Rough Creek graben and shows a systematic southeastward thickening of the Cambrian synrift clastic sequence with as much as 1940 meters of section present against the Pennyrile fault system as compared to 970 meters near the Lusk Creek and Shawneetown fault systems, towards the northwestern margin of the rift. This contrasts with the more symmetric rift pattern in the seismically active zone to the south, where the maximum thickness of synrift sediments is along the rift axis, and with an opposite sense of rift asymmetry in the Rough Creek graben, where the synrift sequence thickens to the north against the Rough Creek - Shawneetown fault. Reflection patterns in the vicinity of Hicks dome, a “cryptovolcano”, are consistent with the hypothesis that the dome originated by explosive release of mantle-derived gases associated with alkali volcanism. The seismic data also reveal that the fluorine mineralization in the area is associated with faults that offset basement; this is further evidence that deeply-derived fluids are significant in the geologic evolution of the area.

Depositional Environment Drive as Overpressure Generation: Study Case in “Gap” Field, North West Java Basin

2020 ◽  
Author(s):  
A., C. Prasetyo
Keyword(s):  
Clay Mineral ◽  
Depositional Environment ◽  
Mineral Content ◽  
Hydrocarbon Generation ◽  
Well Test ◽  
Burial History ◽  
The South ◽  
North West ◽  
The North ◽  
Geological Processes

Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of pore pressures using the Eaton Method. The stages are determining shale intervals with GR logs, calculating vertical stress/overburden stress values, determining normal compaction trends, making cross plots of sonic logs against density logs, calculating geothermal gradients, analyzing hydrocarbon maturity, and calculating sedimentation rates with burial history. The research conducted an analysis method on the distribution of clay mineral composition to determine depositional environment and its relationship to overpressure. The wells include GAP-01, GAP-02, GAP-03, and GAP-04 which has an overpressure zone range at depth 8501-10988 ft. The pressure value within the 4 wells has a range between 4358-7451 Psi. Overpressure mechanism in the GAP field is caused by non-loading mechanism (clay mineral diagenesis and hydrocarbon maturation). Overpressure distribution is controlled by its stratigraphy. Therefore, it is possible overpressure is spread quite broadly, especially in the low morphology of the “GAP” Field. This relates to the delta depositional environment with thick shale. Based on clay minerals distribution, the northern part (GAP 02 & 03) has more clay mineral content compared to the south and this can be interpreted increasingly towards sea (low energy regime) and facies turned into pro-delta. Overpressure might be found shallower in the north than the south due to higher clay mineral content present to the north.

Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996

1997 ◽  
pp. 66-74
Author(s):  
Henrik Stendal ◽  
Wulf Mueller ◽  
Nicolai Birkedal ◽  
Esben I. Hansen ◽  
Claus Østergaard
Keyword(s):  
Mineral Exploration ◽  
Volcanic Rocks ◽  
Shear Zones ◽  
Field Work ◽  
Igneous Rocks ◽  
Border Zone ◽  
The South ◽  
East Greenland ◽  
North West ◽  
Arc Setting

NOTE: This article was published in a former series of GEUS Bulletin. Please use the original series name when citing this article, for example: Stendal, H., Mueller, W., Birkedal, N., Hansen, E. I., & Østergaard, C. (1997). Mafic igneous rocks and mineralisation in the Palaeoproterozoic Ketilidian orogen, South-East Greenland: project SUPRASYD 1996. Geology of Greenland Survey Bulletin, 176, 66-74. https://doi.org/10.34194/ggub.v176.5064 _______________ The multidisciplinary SUPRASYD project (1992–96) focused on a regional investigation of the Palaeoproterozoic Ketilidian orogenic belt which crosses the southern tip of Greenland. Apart from a broad range of geological and structural studies (Nielsen et al., 1993; Garde & Schønwandt, 1994, 1995; Garde et al., 1997), the project included a mineral resource evaluation of the supracrustal sequences associated with the Ketilidian orogen (e.g. Mosher, 1995). The Ketilidian orogen of southern Greenland can be divided from north-west to south-east into: (1) a border zone in which the crystalline rocks of the Archaean craton are unconformably overlain by Ketilidian supracrustal rocks; (2) a major polyphase pluton, referred to as the Julianehåb batholith; and (3) extensive areas of Ketilidian supracrustal rocks, divided into psammitic and pelitic rocks with subordinate interstratified mafic volcanic rocks (Fig. 1). The Julianehåb batholith is viewed as emplaced in a magmatic arc setting; the supracrustal sequences south of the batholith have been interpreted as either (1) deposited in an intra-arc and fore-arc basin (Chadwick & Garde, 1996), or (2) deposited in a back-arc or intra-arc setting (Stendal & Swager, 1995; Swager, 1995). Both possibilities are plausible and infer subduction-related processes. Regional compilations of geological, geochemical and geophysical data for southern Greenland have been presented by Thorning et al. (1994). Mosher (1995) has recently reviewed the mineral exploration potential of the region. The commercial company Nunaoil A/S has been engaged in gold prospecting in South Greenland since 1990 (e.g. Gowen et al., 1993). A principal goal of the SUPRASYD project was to test the mineral potential of the Ketilidian supracrustal sequences and define the gold potential in the shear zones in the Julianehåb batholith. Previous work has substantiated a gold potential in amphibolitic rocks in the south-west coastal areas (Gowen et al., 1993.), and in the amphibolitic rocks of the Kutseq area (Swager et al., 1995). Field work in 1996 was focused on prospective gold-bearing sites in mafic rocks in South-East Greenland. Three M.Sc. students mapped showings under the supervision of the H. S., while an area on the south side of Kangerluluk fjord was mapped by H. S. and W. M. (Fig. 4).

Velumtätigkeit bei der Erzeugung stimmhafter und stimmloser Nasalkonsonanten im Isländischen

1981 ◽  
Vol 4 (1) ◽  
pp. 19-28 ◽  
Author(s):  
Magnús Pétursson
Keyword(s):  
Temporal Patterns ◽  
Stop Consonants ◽  
The South ◽  
Research Instrument ◽  
North West ◽  
South West ◽  
Different Types ◽  
Nasal Consonant

In modern Icelandic, spoken in the South, West, and North-West of Iceland, there is a phonemic opposition between voiced and voiceless nasals before stop consonants. For the present investigation the research instrument was the velograph. The purpose of the research was to investigate patterns of velar movement associated with each type of nasal consonants. The results show different types of velar movement organized according to two separate temporal patterns. For the voiceless nasals the movement of the velum is more rapid and begins earlier than for the voiced nasals. There are also significant differences in the nasalization of the preceding vowel according to whether the following nasal consonant is voiced or voiceless.

A gold diadem from Aegina

1987 ◽  
Vol 107 ◽  
pp. 182-182
Author(s):  
Reynold Higgins
Keyword(s):  
Bronze Age ◽  
British Museum ◽  
The South ◽  
North West ◽  
The North ◽  
The Dead ◽  
Middle Helladic ◽  
Dead Man ◽  
The Bronze Age ◽  
Grave Goods

A recent discovery on the island of Aegina by Professor H. Walter (University of Salzburg) throws a new light on the origins of the so-called Aegina Treasure in the British Museum.In 1982 the Austrians were excavating the Bronze Age settlement on Cape Kolonna, to the north-west of Aegina town. Immediately to the east of the ruined Temple of Apollo, and close to the South Gate of the prehistoric Lower Town, they found an unrobbed shaft grave containing the burial of a warrior. The gravegoods (now exhibited in the splendid new Museum on the Kolonna site) included a bronze sword with a gold and ivory hilt, three bronze daggers, one with gold fittings, a bronze spear-head, arrowheads of obsidian, boar's tusks from a helmet, and fragments of a gold diadem (plate Va). The grave also contained Middle Minoan, Middle Cycladic, and Middle Helladic (Mattpainted) pottery. The pottery and the location of the grave in association with the ‘Ninth City’ combine to give a date for the burial of about 1700 BC; and the richness of the grave-goods would suggest that the dead man was a king.

Sign in / Sign up

Export Citation Format

Share Document