CannyTEM – a high-resolution transient electromagnetic system based on mobile technology and artificial intelligence

2015 ◽  
Author(s):  
Xing He ◽  
Rujun Chen* ◽  
Hongchun Yao ◽  
Hong Wu ◽  
Jieting Qiu ◽  
...  
2020 ◽  
Vol 18 (3) ◽  
pp. 249-259 ◽  
Author(s):  
Pradip Kumar Maurya ◽  
Anders Vest Christiansen ◽  
Jesper Pedersen ◽  
Esben Auken

Geophysics ◽  
2019 ◽  
Vol 84 (1) ◽  
pp. E13-E22 ◽  
Author(s):  
Esben Auken ◽  
Nikolaj Foged ◽  
Jakob Juul Larsen ◽  
Knud Valdemar Trøllund Lassen ◽  
Pradip Kumar Maurya ◽  
...  

There is a growing need for detailed investigation of the top 30–50 m of the subsurface, which is critical for infrastructure, water supply, aquifer storage and recovery, farming, waste deposits, and construction. Existing geophysical methods are capable of imaging this zone; however, they have limited efficiency when it comes to creating full 3D images with high resolution over dozens to hundreds of hectares. We have developed a new and highly efficient towed transient electromagnetic (tTEM) system, which is capable of imaging the subsurface up to depth of 70 m at a high resolution, horizontally and vertically. Towed by an all-terrain vehicle, the system uses a [Formula: see text] transmitter coil and has a [Formula: see text]-component receiver placed at 9 m offset from the transmitter. The tTEM uses dual transmitter moment (low and high moment) measurement sequence to obtain the early and late time gates corresponding to shallow and deep information about the subsurface layers. The first bias-free gate is as early as [Formula: see text] from beginning of the ramp ([Formula: see text] after end of ramp). Data are processed and inverted using methods directly adopted from airborne electromagnetics. The system has been successfully used in Denmark for various purposes, e.g., mapping raw materials, investigating contaminated sites, and assessing aquifer vulnerability. We have also used the tTEM system in the Central Valley of California (United States) for locating artificial recharge sites and in the Mississippi Delta region, to map complex subsurface geology in great detail for building hydrogeologic models.


Blood ◽  
2020 ◽  
Vol 136 (Supplement 1) ◽  
pp. 8-9
Author(s):  
Ben Zion Katz ◽  
Irit Avivi ◽  
Dan Benisty ◽  
Shahar Karni ◽  
Hadar Shimoni ◽  
...  

Complete blood count (CBC) analysis is one of the most commonly ordered laboratory tests and is a critical first step in patients' clinical evaluation. However, CBC analyzers are limited in their ability to positively identify several types of white blood cells (WBC), and cells with substantial clinical significance, such as immature granulocytes or blasts, are merely marked as flags. Also, CBC analyzers fall short of recognizing informative red blood cell (RBC) morphology, such as schistocytes, and often provide inaccurate platelets count. Flags and clinically non-sufficient CBC-derived data reflex to generation of blood smear (BS), and BS review comprises a substantial portion of the workload in routine hematology laboratories. For accurate identification and classification of WBC, BS analysis (BSA) requires detailed observation of cells with high-magnification objective (60-100X), which provides a relatively narrow Field of View (FOV). This physical limitation restricts current BSA to either low resolution/wide FOV or to high resolution/narrow FOV data generation (Fig. 1A). Hence, key issues of BSA such as the effects of the smearing process on the distribution of blood components, the effects of cells distribution on their morphology and further classification, as well as many other attributes, are addressed only qualitatively or empirically, leaving the real topology of the BS obscure. The computational imaging microscopy system presented herein uses a low resolution and wide FOV objective, and records a plurality of images under different illumination conditions, of the same sample area (Fig. 1B). An algorithm reconstructs a high resolution and aberration free image of whole specimens, as can be observed in the attached link (https://tinyurl.com/Scopio-Labs-X100-ASH-2020). High resolution images are critical not only for manual BSA, but also for artificial intelligence (AI)-derived BSA, since data quality is of prime importance for deep-learning processes, and to a large extent determine their outcome. Thus, the combination of high resolution/wide FOV turns each BS into a big data analytic field, rendering the measurement of yet undetermined cell characteristics. In order to elucidate the basic topology, 60 normal BS (28 females, 32 males) were subjected to analysis utilizing this novel computational imaging microscopy. For convenience of analysis and comparison with current BSA methodology, BS were segmented into strips according to RBC density (Fig. 1C, D). The average length of smear from females (F) was higher by nearly 28% compared with smear from males (M), and the presence of acute inflammation (A) resulted in a significant 33% increase in overall smear length compared to normal (N) average (Fig. 1E). As expected, RBC density formed a linear gradient (Fig. 1C) along the axis of sample smearing, however, RBC morphology was affected by location within the BS. For example, strips 4-5 contained RBC with the appearance of spherocytes (Fig. 1F; arrows), while in strips with increased RBC density, cells aggregated resembling rouleaux formation (Fig. 1F; arrowheads). Platelets distribution was non-linear, with only a few of them reaching the feathered edge of the smear (Fig. 1G). Since the variance of both RBC/FOV and platelets/FOV concentrations drops starting with strip 4, BS-derived platelets number estimates should not be performed in strips 1-3. On average, a normal BS contains 890+399 WBC in the scanned area (strips 1-8). Similar to RBC, the location of individual WBC throughout the BS may affect their morphology, and hence their classification. WBC in the feathered edge (strips 1-3) are generally more stretched, and often squeezed between RBC, rendering their classification by AI-based tools challenging (Fig. 1H). In strips 4-7, WBC morphology is optimal for a classification task, enabling favorable outcomes for either manual or AI cell analysis (Fig. 1H). These data indicate that BSA can be taken to a sensitivity level of at least 10-3 of WBC analysis, provided that a large portion of the BS is scanned. Our system provides a novel combination of computational imaging microscopy and AI-based classification tools to unravel the complex topology of blood smears, and upgrade the data obtained in BSA. This approach enables the establishment of quantitative rules to scientifically direct the objective analysis of cellular blood components both manually, and by AI-tools. Figure Disclosures Katz: Scopio Labs: Consultancy.


Ground Water ◽  
2021 ◽  
Author(s):  
Denys Grombacher ◽  
Pradip Kumar Maurya ◽  
Johan Christensen Lind ◽  
John Lane ◽  
Esben Auken

2011 ◽  
pp. 1625-1632
Author(s):  
Volker Derballa ◽  
Key Pousttchi

IT support for knowledge management (KM) is a widely discussed issue. Whereas an overemphasis on technology is often criticized, the general consensus is that a well-balanced combination of technical and social approaches can be a rewarding departure (Alavi & Leidner, 1999). The usage of knowledge management systems (KMSs) (i.e., information systems including for example data warehouse techniques and artificial intelligence tools) is seen as a factor that can beneficially support different KM processes (Frank, 2001; Wiig, 1995). Due to the fact that an increasingly large proportion of work is not conducted in the context of stationary workplaces anymore, it becomes necessary to make KMSs available to those mobile workers (Rao, 2002; Sherman, 1999). Considering the different technological infrastructure in the stationary, as well as the mobile context, a KMS that so far is only available at a stationary workplace cannot simply become mobile without any changes. Further, the aspect of mobility implies specific design requirements for KMS. Taking together the rapid developments in the field of technology, allowing more and more mobile processes to be potentially supported through mobile KMS, as well as the current social and occupational developments, resulting in more mobile workplaces and business processes (Gruhn & Book, 2003), the relevance of mobile KM can be expected to increase in the future.


Author(s):  
Soobia Saeed ◽  
N. Z. Jhanjhi ◽  
Memood Naqvi ◽  
Mamoona Humayun ◽  
Vasaki Ponnusamy

A new coronavirus-CoV-2 virus has caused disease outbreaks in many countries, and the number of cases is increasing rapidly through transmission from person to person. Clinical acoustics for SARS-CoV-2 patients are crucial to distinguish them from other respiratory infections. Symptomatic sufferers can also have pulmonary lesions on the photographs. A computerized tomography study in patients with suspected COVID-19 pneumonia consists of using a high-resolution approach (HRCT). Artificial intelligence applications need to be useful in categorizing the illness to an awesome severity and integrating the structured file, organized consistent with subjective issues, with objective and quantitative checks of the amount of the lesions. Data indicate the statistical document of the world in trendy. This method, with the aid of a coloring map, identifies floor glass in submission processing and separates it from consolidation and units it as a percentage in respect to the balanced weight loss program.


Sign in / Sign up

Export Citation Format

Share Document