A Case Study of Complex Carbonate Reservoir Connectivity Analysis, Tarim Basin, China

2021 ◽  
pp. 1-41
Author(s):  
Zhangwu Meng ◽  
Zandong Sun ◽  
Guofa Li
Keyword(s):  
Tarim Basin ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Carbonate Reservoir ◽  
Carbonate Reservoirs ◽  
Connectivity Analysis ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Diffraction Imaging ◽  
Reservoir Connectivity

The connectivity of complex carbonate reservoirs has an essential impact on the exploration and development of these reservoirs. From geological genesis, the connectivity of complex carbonate reservoirs is mainly controlled by faults and dissolution. Therefore, accurate identification of faults and karst caves is the key to studying reservoir connectivity. The Ordovician carbonate reservoir in the Hudson Oilfield of the Tarim Basin is used for the reservoir connectivity analysis study. Firstly, we calculate the coherence and curvature attributes and then merge the two attributes using a neural network algorithm. Finally, we use the ant tracking method to track the faults for the merged data. The results show that the approach substantially enhances deterministic faults that can be seen directly on the seismic data, and the subtle faults can also be identified. For reservoir identification, we use the diffraction imaging method to describe the karst reservoir in this study area. The results show that diffraction imaging can identify small-scale caves that cannot be well recognized on the seismic reflection data. Furthermore, the caves connected on the diffraction seismic data are isolated from each other on the seismic reflection data, making the connection between caves clearer. Based on the results of faults and caves identification, we analyze the reservoir connectivity of the study area using the oil pressure and daily production data. It indicates that the NNW and near-NS faults probably play a role in the connection of the reservoirs, while the NEE faults tend to block the connection of the reservoirs.

scholarly journals Improved Interpretation of Deep Seismic Reflection Data in Areas of Complex Geology Through Integration With Passive Seismic Data Sets

2018 ◽  
Vol 123 (12) ◽  
pp. 10,810-10,830
Author(s):  
Michael Dentith ◽  
Huaiyu Yuan ◽  
Ruth Elaine Murdie ◽  
Perla Pina-Varas ◽  
Simon P. Johnson ◽  
...  
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Data Sets ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Reflection Data ◽  
Passive Seismic ◽  
Complex Geology

Late Cretaceous – Cenozoic history of the transition zone between the East European Craton and the Paleozoic Platform, Polish sector of the Baltic Sea, revealed by new offshore regional seismic reflection data (BALTEC project)

2021 ◽  
Author(s):  
Piotr Krzywiec ◽  
Łukasz Słonka ◽  
Quang Nguyen ◽  
Michał Malinowski ◽  
Mateusz Kufrasa ◽  
...  
Keyword(s):  
High Resolution ◽  
Late Cretaceous ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Upper Cretaceous ◽  
Seismic Reflection Data ◽  
East European ◽  
Reflection Data ◽  
Multichannel Seismic Reflection ◽  
Multichannel Seismic Reflection Data

<p>In 2016, approximately 850 km of high-resolution multichannel seismic reflection data of the BALTEC survey have been acquired offshore Poland within the transition zone between the East European Craton and the Paleozoic Platform. Data processing, focused on removal of multiples, strongly overprinting geological information at shallower intervals, included SRME, TAU-P domain deconvolution, high resolution parabolic Radon demultiple and SWDM (Shallow Water De-Multiple). Entire dataset was Kirchhoff pre-stack time migrated. Additionally, legacy shallow high-resolution multichannel seismic reflection data acquired in this zone in 1997 was also used. All this data provided new information on various aspects of the Phanerozoic evolution of this area, including Late Cretaceous to Cenozoic tectonics and sedimentation. This phase of geological evolution could be until now hardly resolved by analysis of industry seismic data as, due to limited shallow seismic imaging and very strong overprint of multiples, essentially no information could have been retrieved from this data for first 200-300 m. Western part of the BALTEC dataset is located above the offshore segment of the Mid-Polish Swell (MPS) – large anticlinorium formed due to inversion of the axial part of the Polish Basin. BALTEC seismic data proved that Late Cretaceous inversion of the Koszalin – Chojnice fault zone located along the NE border of the MPS was thick-skinned in nature and was associated with substantial syn-inversion sedimentation. Subtle thickness variations and progressive unconformities imaged by BALTEC seismic data within the Upper Cretaceous succession in vicinity of the Kamień-Adler and the Trzebiatów fault zones located within the MPS documented complex interplay of Late Cretaceous basin inversion, erosion and re-deposition. Precambrian basement of the Eastern, cratonic part of the study area is overlain by Cambro-Silurian sedimentary cover. It is dissected by a system of steep, mostly reverse faults rooted in most cases in the deep basement. This fault system has been regarded so far as having been formed mostly in Paleozoic times, due to the Caledonian orogeny. As a consequence, Upper Cretaceous succession, locally present in this area, has been vaguely defined as a post-tectonic cover, locally onlapping uplifted Paleozoic blocks. New seismic data, because of its reliable imaging of the shallowest substratum, confirmed that at least some of these deeply-rooted faults were active as a reverse faults in latest Cretaceous – earliest Paleogene. Consequently, it can be unequivocally proved that large offshore blocks of Silurian and older rocks presently located directly beneath the Cenozoic veneer must have been at least partly covered by the Upper Cretaceous succession; then, they were uplifted during the widespread inversion that affected most of Europe. Ensuing regional erosion might have at least partly provided sediments that formed Upper Cretaceous progradational wedges recently imaged within the onshore Baltic Basin by high-end PolandSPAN regional seismic data. New seismic data imaged also Paleogene and younger post-inversion cover. All these results prove that Late Cretaceous tectonics substantially affected large areas located much farther towards the East than previously assumed.</p><p>This study was funded by the Polish National Science Centre (NCN) grant no UMO-2017/27/B/ST10/02316.</p>

scholarly journals Monte Carlo reservoir analysis combining seismic reflection data and informed priors

Geophysics ◽  
2015 ◽  
Vol 80 (1) ◽  
pp. R31-R41 ◽  
Author(s):  
Andrea Zunino ◽  
Klaus Mosegaard ◽  
Katrine Lange ◽  
Yulia Melnikova ◽  
Thomas Mejer Hansen
Keyword(s):  
Monte Carlo ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Probabilistic Approach ◽  
Multiple Point ◽  
Petroleum Reservoir ◽  
Inversion Algorithm ◽  
Reservoir Properties ◽  
Seismic Reflection Data ◽  
Reflection Data

Determination of a petroleum reservoir structure and rock bulk properties relies extensively on inference from reflection seismology. However, classic deterministic methods to invert seismic data for reservoir properties suffer from some limitations, among which are the difficulty of handling complex, possibly nonlinear forward models, and the lack of robust uncertainty estimations. To overcome these limitations, we studied a methodology to invert seismic reflection data in the framework of the probabilistic approach to inverse problems, using a Markov chain Monte Carlo (McMC) algorithm with the goal to directly infer the rock facies and porosity of a target reservoir zone. We thus combined a rock-physics model with seismic data in a single inversion algorithm. For large data sets, the McMC method may become computationally impractical, so we relied on multiple-point-based a priori information to quantify geologically plausible models. We tested this methodology on a synthetic reservoir model. The solution of the inverse problem was then represented by a collection of facies and porosity reservoir models, which were samples of the posterior distribution. The final product included probability maps of the reservoir properties in obtained by performing statistical analysis on the collection of solutions.

Instantaneous spectral bandwidth and dominant frequency with applications to seismic reflection data

Geophysics ◽  
1993 ◽  
Vol 58 (3) ◽  
pp. 419-428 ◽  
Author(s):  
Arthur E. Barnes
Keyword(s):  
Instantaneous Frequency ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Power Spectra ◽  
Dominant Frequency ◽  
Center Frequency ◽  
Spectral Bandwidth ◽  
Instantaneous Amplitude ◽  
Seismic Reflection Data ◽  
Reflection Data

Fourier power spectra are often usefully characterized by average measures. In reflection seismology, the important average measures are center frequency, spectral bandwidth, and dominant frequency. These quantities have definitions familiar from probability theory: center frequency is the spectral mean, spectral bandwidth is the standard deviation about that mean, and dominant frequency is the square root of the second moment, which serves as an estimate of the zero‐crossing frequency. These measures suggest counterparts defined with instantaneous power spectra in place of Fourier power spectra, so that they are instantaneous in time though they represent averages in frequency. Intuitively reasonable requirements yield specific forms for these instantaneous quantities that can be computed with familiar complex seismic trace attributes. Instantaneous center frequency is just instantaneous frequency. Instantaneous bandwidth is the absolute value of the derivative of the instantaneous amplitude divided by the instantaneous amplitude. Instantaneous dominant frequency is the square root of the sum of the squares of the instantaneous frequency and instantaneous bandwidth. Instantaneous bandwidth and dominant frequency find employment as additional complex seismic trace attributes in the detailed study of seismic data. Instantaneous bandwidth is observed to be nearly always less than instantaneous frequency; the points where it is larger may mark the onset of distinct wavelets. These attributes, together with instantaneous frequency, are perhaps, of greater use in revealing the time‐varying spectral properties of seismic data. They can help in the search for low frequency shadows or in the analysis of frequency change due to effects of data processing. Instantaneous bandwidth and dominant frequency complement instantaneous frequency and should find wide application in the analysis of seismic reflection data.

scholarly journals Structural Interpretation of Yamama and Naokelekan Formations in Tuba Oil Field Using 2D Seismic Data

2021 ◽  
Vol 54 (2B) ◽  
pp. 55-64
Author(s):  
Belal M. Odeh
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Seismogram ◽  
Oil Field ◽  
Well Log ◽  
Seismic Reflection Data ◽  
Depth Maps ◽  
Reflection Data ◽  
Interpretation Process ◽  
Southern Iraq

This research includes structure interpretation of the Yamama Formation (Lower Cretaceous) and the Naokelekan Formation (Jurassic) using 2D seismic reflection data of the Tuba oil field region, Basrah, southern Iraq. The two reflectors (Yamama and Naokelekan) were defined and picked as peak and tough depending on the 2D seismic reflection interpretation process, based on the synthetic seismogram and well log data. In order to obtain structural settings, these horizons were followed over all the regions. Two-way travel-time maps, depth maps, and velocity maps have been produced for top Yamama and top Naokelekan formations. The study concluded that certain longitudinal enclosures reflect anticlines in the east and west of the study area representing Zubair and Rumaila fold confined between them a fold consist of two domes represents Tuba fold with the same trending of Zubair and Rumaila structures. The study confirmed the importance of this field as a reservoir of the accumulation of hydrocarbons.

scholarly journals Reassessing legacy seismic reflection data. Extracting new information through advanced seismic processing schemes.

2021 ◽  
Author(s):  
Ramon Carbonell ◽  
Yesenia Martinez ◽  
Irene de Felipe ◽  
Juan Alcalde ◽  
Imma Palomeras ◽  
...  
Keyword(s):  
Land Use Planning ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Leading Edge ◽  
Critical Issue ◽  
Commercial Development ◽  
Natural Risk ◽  
Seismic Reflection Data ◽  
Seismic Processing ◽  
Reflection Data

<p><span>Hardware and software innovations taking place since the commercial development of seismic reflection imaging in the 60’s and early 70’s have resulted in various improved powerful seismic imaging solutions. Overall, these have been very successful in contrasting geological environments pursuing a wide variety of different targets. The innovative advances in seismic processing may constitute critical tools when analyzing seismic data acquired in highly heterogeneous geologic environments as they can efficiently increase the resolution power. In addition, they can become relevant when using modern acquisition instrumentation and strategies. Furthermore, these new developments significantly increase the value of legacy seismic reflection data. Currently, reassessing controlled source seismic data is becoming a critical issue mostly due to the increasing difficulties for acquiring new profiles posed by environmental regulations and high prices. However, the knowledge of the subsurface is an asset for our society, for example: </span><span><span>land-use planning and management; natural risk assessments; or exploration and exploitation for geo-resources. Here we present examples of analysis schemes such as seismic attribute analysis and Common Reflection Surface stacking applied on a number of old seismic reflection profiles (Deep lithospheric transects as well as high resolution profiles) in an effort to bring up their validity. Results indicate how these leading edge methods contribute to significantly improve the quality of vintage seismic data, significantly reducing reflector uncertainties and easing their interpretation. </span></span></p><p><span><span>This research is supported by: Generalitat de Catalunya (AGAUR) grant 2017SGR1022 (GREG); EU (H2020) 871121 (EPOS-SP); EIT-RaewMaterias 17024 (SIT4ME). </span></span></p><p> </p>

EXPLORATION HORIZONS FROM NEW SEISMIC CONCEPTS OF CDP AND DIGITAL PROCESSING

Geophysics ◽  
1967 ◽  
Vol 32 (2) ◽  
pp. 207-224 ◽  
Author(s):  
John D. Marr ◽  
Edward F. Zagst
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Seismic Reflection ◽  
Synthetic Data ◽  
Digital Processing ◽  
Seismic Data Processing ◽  
Multiple Reflections ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Recent Developments

The more recent developments in common‐depth‐point techniques to attenuate multiple reflections have resulted in an exploration capability comparable to the development of the seismic reflection method. The combination of new concepts in digital seismic data processing with CDP techniques is creating unforeseen exploration horizons with vastly improved seismic data. Major improvements in multiple reflection and reverberation attenuation are now attainable with appropriate CDP geometry and special CDP stacking procedures. Further major improvements are clearly evident in the very near future with the use of multichannel digital filtering‐stacking techniques and the application of deconvolution as the first step in seismic data processing. CDP techniques are briefly reviewed and evaluated with real and experimental data. Synthetic data are used to illustrate that all seismic reflection data should be deconvolved as the first processing step.

Shifted-elliptical nonstretch moveout correction of wide-angle seismic data in the τ-p domain, using an example from the Faeroe-Shetland Basin

Geophysics ◽  
2012 ◽  
Vol 77 (5) ◽  
pp. B227-B236 ◽  
Author(s):  
Hassan Masoomzadeh ◽  
Satish C. Singh ◽  
Penny J. Barton
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Wide Angle ◽  
Data Set ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Angle Data ◽  
Vertical Heterogeneity ◽  
P Domain

We developed a method of moveout correction in the [Formula: see text] domain to tackle some of the problems associated with processing wide-angle seismic reflection data, including residual moveout and normal-moveout stretching. We evaluated the concept of the shifted ellipse in the [Formula: see text] domain as an alternative to the well-known concept of the shifted hyperbola in the [Formula: see text] domain. We used this shifted-ellipse concept to address the problem of residual moveout caused by vertical heterogeneity in the subsurface. We also addressed the stretching problem associated with dynamic corrections by combining selected strips from a set of constant-moveout stacks generated using a shifted-ellipse equation. Application of this method to a wide-angle data set from the Faeroe-Shetland Basin provided an enhanced image of the subbasalt structure.

The use of seismic modeling for the geologic interpretation of deep seismic reflection data with low signal-to-noise ratios

2017 ◽  
Vol 5 (1) ◽  
pp. T23-T31 ◽  
Author(s):  
Ionelia Panea ◽  
Stefan Prisacari ◽  
Victor Mocanu ◽  
Mihnea Micu ◽  
Marius Paraschivoiu
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Seismic Section ◽  
Seismic Reflection Data ◽  
Deep Seismic Reflection ◽  
Subsurface Geology ◽  
Reflection Data ◽  
Geologic Interpretation ◽  
Romanian Carpathians ◽  
Seismic Data Acquisition

We have performed a deep seismic reflection study, DACIA-PLAN, based on the data recorded along a crooked line across the southeastern Romanian Carpathians. The signal-to-noise ratio (S/N) of these data varies along the seismic profile, and its variation is considered to be an effect of the rough topography, complex subsurface geology, and varying surface conditions encountered during seismic data acquisition. The migrated time section that covers the mountainous area is clear, without visible reflections, making the geologic interpretation very difficult. We used a seismic modeling technique to explain the poor S/N of the recorded data and to generate synthetic seismic sections that can be useful for the geologic interpretation of the field seismic section (migrated time section). We used ray-tracing modeling to obtain the expected seismic expression of horizons of interest. Subsurface illumination modeling indicates that the complex subsurface geology and irregularly deployed sources and receivers are responsible for the incomplete and/or uneven illumination of the subsurface and can lead to strong amplitude variations. We then used 2.5D acoustic finite-difference modeling to analyze the effect of a crooked line on seismic wave propagation. The synthetic shot gathers prove that crooked line arrival times for reflected and head waves contain static time shifts relative to a straight line regular sampling geometry. Some geologic interfaces of interest are not well-imaged on the synthetic seismic section, and this is considered to be an effect of poor positioning during seismic data acquisition. We used the velocity model from the tomographic inversion of first-arrival traveltimes and synthetic and field crooked line deep seismic reflection data to create a structural image for the southeastern Romanian Carpathians and the Focsani Basin, which tie well with the geologic model built for this area on the basis of geologic and well data only.

scholarly journals Extrusion dynamics of deepwater volcanoes revealed by 3-D seismic data

Solid Earth ◽  
2019 ◽  
Vol 10 (4) ◽  
pp. 1269-1282 ◽  
Author(s):  
Qiliang Sun ◽  
Christopher A.-L. Jackson ◽  
Craig Magee ◽  
Samuel J. Mitchell ◽  
Xinong Xie
Keyword(s):  
Seismic Data ◽  
Seismic Reflection ◽  
Minor Component ◽  
Lava Flows ◽  
Lava Tubes ◽  
Seismic Reflection Data ◽  
Reflection Data ◽  
Seafloor Sediments ◽  
Seabed Sediments ◽  
Emplacement Depth

Abstract. Submarine volcanism accounts for ca. 75 % of the Earth's volcanic activity. Yet difficulties with imaging their exteriors and interiors mean that the extrusion dynamics and erupted volumes of deepwater volcanoes remain poorly understood. Here, we use high-resolution 3-D seismic reflection data to examine the external and internal geometry and extrusion dynamics of two late Miocene–Quaternary deepwater (> 2 km emplacement depth) volcanoes buried beneath 55–330 m of sedimentary strata in the South China Sea. The volcanoes have crater-like bases, which truncate underlying strata and suggest extrusion was initially explosive, and erupted lava flows that feed lobate lava fans. The lava flows are > 9 km long and contain lava tubes that have rugged basal contacts defined by ∼90±23 m high erosional ramps. We suggest the lava flows eroded down into and were emplaced within wet, unconsolidated, near-seafloor sediments. Extrusion dynamics were likely controlled by low magma viscosities as a result of increased dissolved H2O due to high hydrostatic pressure and soft, near-seabed sediments, which are collectively characteristic of deepwater environments. We calculate that long-runout lava flows account for 50 %–97 % of the total erupted volume, with a surprisingly minor component (∼3 %–50 %) being preserved in the main volcanic edifice. Accurate estimates of erupted volumes therefore require knowledge of volcano and lava basal surface morphology. We conclude that 3-D seismic reflection data are a powerful tool for constraining the geometry, volumes, and extrusion dynamics of ancient or active deepwater volcanoes and lava flows.

Sign in / Sign up

Export Citation Format

Share Document