Conditional Mean Spectra Given a Vector of Spectral Accelerations at Multiple Periods

2017 ◽  
Vol 33 (2) ◽  
pp. 469-479 ◽  
Author(s):  
Tadahiro Kishida
Keyword(s):  
Ground Motion ◽  
Uniform Hazard Spectra ◽  
Mathematical Formula ◽  
Conditional Mean ◽  
Design Spectra ◽  
Design Practices ◽  
Design Requirements ◽  
Spectral Accelerations ◽  
Pseudo Spectral

Conditional mean spectra (CMS) are generally defined as expected pseudo-spectral accelerations (PSA) conditioned on uniform hazard spectra (UHS) at a selected period. Many design practices prefer CMS because UHS conservatively envelop the large amplitudes of PSA within a single ground motion. However, in some situations, CMS are preferred given target spectra from UHS at multiple periods (CMSV) for satisfying design requirements. This study presents the mathematical formula of CMSV and describes the methodology to compute CMSV with application examples. The presented method for computing CMSV can provide the transitional design spectra between currently used CMS and UHS depending on the selected conditioning periods.

scholarly journals Ground motions in urban Los Angeles from the 2019 Ridgecrest earthquake sequence

2021 ◽  
pp. 875529302110039
Author(s):  
Filippos Filippitzis ◽  
Monica D Kohler ◽  
Thomas H Heaton ◽  
Robert W Graves ◽  
Robert W Clayton ◽  
...  
Keyword(s):  
Los Angeles ◽  
Ground Motion ◽  
Ground Motions ◽  
Earthquake Sequence ◽  
Motion Prediction ◽  
Ground Motion Prediction Equations ◽  
Prediction Equations ◽  
Ground Motion Prediction ◽  
Velocity Models ◽  
Spectral Accelerations

We study ground-motion response in urban Los Angeles during the two largest events (M7.1 and M6.4) of the 2019 Ridgecrest earthquake sequence using recordings from multiple regional seismic networks as well as a subset of 350 stations from the much denser Community Seismic Network. In the first part of our study, we examine the observed response spectral (pseudo) accelerations for a selection of periods of engineering significance (1, 3, 6, and 8 s). Significant ground-motion amplification is present and reproducible between the two events. For the longer periods, coherent spectral acceleration patterns are visible throughout the Los Angeles Basin, while for the shorter periods, the motions are less spatially coherent. However, coherence is still observable at smaller length scales due to the high spatial density of the measurements. Examining possible correlations of the computed response spectral accelerations with basement depth and Vs30, we find the correlations to be stronger for the longer periods. In the second part of the study, we test the performance of two state-of-the-art methods for estimating ground motions for the largest event of the Ridgecrest earthquake sequence, namely three-dimensional (3D) finite-difference simulations and ground motion prediction equations. For the simulations, we are interested in the performance of the two Southern California Earthquake Center 3D community velocity models (CVM-S and CVM-H). For the ground motion prediction equations, we consider four of the 2014 Next Generation Attenuation-West2 Project equations. For some cases, the methods match the observations reasonably well; however, neither approach is able to reproduce the specific locations of the maximum response spectral accelerations or match the details of the observed amplification patterns.

Relational database used for ground-motion model development in the NGA-sub project

2021 ◽  
pp. 875529302110552
Author(s):  
Silvia Mazzoni ◽  
Tadahiro Kishida ◽  
Jonathan P Stewart ◽  
Victor Contreras ◽  
Robert B Darragh ◽  
...  
Keyword(s):  
Subduction Zone ◽  
Ground Motion ◽  
Data Storage ◽  
Relational Database ◽  
Model Development ◽  
Intensity Measures ◽  
Motion Models ◽  
Ground Motion Model ◽  
Ground Motion Models ◽  
Pseudo Spectral

The Next-Generation Attenuation for subduction zone regions project (NGA-Sub) has developed data resources and ground motion models for global subduction zone regions. Here we describe the NGA-Sub database. To optimize the efficiency of data storage, access, and updating, data resources for the NGA-Sub project are organized into a relational database consisting of 20 tables containing data, metadata, and computed quantities (e.g. intensity measures, distances). A database schema relates fields in tables to each other through a series of primary and foreign keys. Model developers and other users mostly interact with the data through a flatfile generated as a time-stamped output of the database. We describe the structure of the relational database, the ground motions compiled for the project, and the means by which the data can be accessed. The database contains 71,340 three-component records from 1880 earthquakes from seven global subduction zone regions: Alaska, Central America and Mexico, Cascadia, Japan, New Zealand, South America, and Taiwan. These data were processed on a component-specific basis to minimize noise effects in the data and remove baseline drifts. Provided ground motion intensity measures include peak acceleration, peak velocity, and 5%-damped pseudo-spectral accelerations for a range of oscillator periods.

Selection and Scaling Time History Records for Performance-Based Design

2017 ◽  
pp. 1-35
Author(s):  
Yasin M. Fahjan ◽  
F. İlknur Kara ◽  
Aydın Mert
Keyword(s):  
Ground Motion ◽  
Strong Ground Motion ◽  
Time History ◽  
Design Code ◽  
Uniform Hazard Spectra ◽  
Acceleration Time ◽  
Acceleration Time Histories ◽  
Recent Developments ◽  
Time Histories ◽  
Strong Ground

Recent developments in performance-based analyses and the high performance of computational facilities have led to an increased trend for utilizing nonlinear time-history analysis in seismic evaluation of the performance of structures. One of the crucial issues of such analysis is the selection of appropriate acceleration time histories set that satisfy design code requirements at a specific site. In literature, there are three sources of acceleration time histories: 1) recorded accelerograms in real earthquakes scaled to match design code spectrum/uniform hazard spectra/conditional mean spectrum, 2) artificial records generated from white noise spectra to satisfy design code spectrum, and 3) synthetic records obtained from seismological models. Due to the increase of available strong ground motion database, using and scaling real recorded accelerograms is becoming one of the most contemporary research issues in this field. In this study, basic methodologies and criteria for selecting strong ground motion time histories are discussed. Design code requirements for scaling are summarized for ASCE/SEI-7-10, EC8 and Turkish Seismic Codes. Examples for scaling earthquake records to uniform hazard spectra are provided.

Direct generation of floor design spectra (FDS) from uniform hazard spectra (UHS) — Part I: formulation of the method

2020 ◽  
Vol 47 (12) ◽  
pp. 1372-1386 ◽  
Author(s):  
Amin Asgarian ◽  
Ghyslaine McClure
Keyword(s):  
Seismic Analysis ◽  
Three Dimensional ◽  
Response Spectra ◽  
Ambient Vibration ◽  
Uniform Hazard Spectra ◽  
Design Spectra ◽  
Floor Response Spectra ◽  
Response Amplification ◽  
Direct Generation ◽  
Ambient Vibration Measurements

In most current building codes, seismic design of non-structural components (NSCs) is addressed through empirical equations that do not capture NSC response amplification due to tuning effects with higher and torsional modes of buildings and that neglect NSC damping. This work addresses these shortcomings and proposes a practical approach to generate acceleration NSC floor design spectra (FDS) in buildings directly from their corresponding uniform hazard spectra (UHS). The study is based on the linear seismic analysis of 27 reinforced concrete buildings located in Montréal, Canada, for which ambient vibration measurements (AVM) are used to determine their in situ three-dimensional dynamic characteristics. Pseudo acceleration floor response spectra (PA-FRS) are derived at every building floor for four different NSCs damping ratios. The calculated roof FRS are compared with the 5% damped UHS and a formulation is proposed to generate roof FDS for NSCs with 5% damping directly from the UHS.

scholarly journals Development of synthetic ground motion at a specific site in Yogyakarta town, Indonesia utilizing the PSHA Method

2020 ◽  
Vol 156 ◽  
pp. 02011
Author(s):  
Widodo Pawirodikromo ◽  
Lalu Makrup ◽  
Mochamad Teguh ◽  
Bambang Suryo
Keyword(s):  
Pilot Study ◽  
Ground Motion ◽  
Hazard Analysis ◽  
Ground Motions ◽  
Time History ◽  
Building Structures ◽  
Uniform Hazard Spectra ◽  
Crustal Earthquakes ◽  
History Analysis ◽  
Dynamic Time

This paper presents the development of synthetic ground motion at specific sites in Yogyakarta town. In the 2019 Indonesian Seismic Code [1] provides an alternative method in the analysis of building structures by applying the dynamic time history analysis. At least 11-pairs of earthquake recordings must be used in the analysis. Synthetic ground motion utilizing the Method of Probability Seismic Hazard Analysis (PSHA) was used in this study. A selected site in Yogyakarta town was chosen as a pilot study considering that there were many fatalities and building damage caused by the 2006 Yogyakarta earthquake. The Uniform Hazard Spectra (UHS) based on the shallow crustal earthquake source is higher than the Megathrust. The risk targeted spectrum demand MCEr has been considered, which on average 12.3% greater than the UHS. The synthetic ground motions (SGM) are accordingly based on the shallow crustal earthquakes. The dominant magnitude and distance are MD = 6.5 and RD = 14.5 km. They show that the contribution of the Opak River fault to the hazard in Yogyakarta town is very dominant because the distance is very close. Based on the obtained MD and RD, spectral matching, and testing significant duration D595, the 12-synthetic ground motions were successfully developed.

Representation of Bidirectional Ground Motions for Design Spectra in Building Codes

2011 ◽  
Vol 27 (3) ◽  
pp. 927-937 ◽  
Author(s):  
Jonathan P. Stewart ◽  
Norman A. Abrahamson ◽  
Gail M. Atkinson ◽  
Jack W. Baker ◽  
David M. Boore ◽  
...  
Keyword(s):  
Ground Motion ◽  
Dynamic Properties ◽  
Ground Motions ◽  
Geometric Mean ◽  
Structural Response ◽  
Risk Level ◽  
Lower Probability ◽  
Lumped Mass ◽  
Risk Levels ◽  
Design Spectra

The 2009 NEHRP Provisions modified the definition of horizontal ground motion from the geometric mean of spectral accelerations for two components to the peak response of a single lumped mass oscillator regardless of direction. These maximum-direction (MD) ground motions operate under the assumption that the dynamic properties of the structure (e.g., stiffness, strength) are identical in all directions. This assumption may be true for some in-plan symmetric structures, however, the response of most structures is dominated by modes of vibration along specific axes (e.g., longitudinal and transverse axes in a building), and often the dynamic properties (especially stiffness) along those axes are distinct. In order to achieve structural designs consistent with the collapse risk level given in the NEHRP documents, we argue that design spectra should be compatible with expected levels of ground motion along those principal response axes. The use of MD ground motions effectively assumes that the azimuth of maximum ground motion coincides with the directions of principal structural response. Because this is unlikely, design ground motions have lower probability of occurrence than intended, with significant societal costs. We recommend adjustments to make design ground motions compatible with target risk levels.

Sign in / Sign up

Export Citation Format

Share Document