Nitrate Removal from Contaminated Groundwater by Anion Exchange

2021 ◽  
pp. 61-113
Author(s):  
Gerald A. Guter
2019 ◽  
Vol 80 (4) ◽  
pp. 727-736 ◽  
Author(s):  
Judah Makover ◽  
David Hasson ◽  
Yunyan Huang ◽  
Raphael Semiat ◽  
Hilla Shemer

Abstract The objective of this work was to investigate electrochemical removal of nitrate from a high salinity waste stream generated by Donnan dialysis. Donnan dialysis for nitrate removal is a promising technique. It produces a distinctive composition of a high salinity waste stream of NaCl or Na2SO4 that requires a viable disposal method. The waste stream has the full anionic composition of contaminated groundwater, but the only cation is sodium. Experiments were conducted in a batch system setup. A copper cathode was chosen over brass, aluminum and graphite cathodes. A dimensionally stable anode (DSA), Ti/PbO2, was selected over a Ti/Pt anode. Electrochemical denitrification of high salinity Donnan dialysis nitrate wastes was successfully achieved, with different behavior exhibited in high salinity NaCl solution than in high salinity Na2SO4 solution. NaCl inhibited nitrate removal at high salinities while Na2SO4 did not. The maximum removals after 4 h operation in the high salinity wastes were 69 and 87% for the NaCl and Na2SO4 solutions respectively.


2015 ◽  
Vol 91 (5) ◽  
pp. 1306-1313 ◽  
Author(s):  
Baijun Wang ◽  
Haiou Song ◽  
Changming Wang ◽  
Chendong Shuang ◽  
Qiang Li ◽  
...  

Author(s):  
Norhayati Abdullah ◽  
Aimi Asyiqin Kassim

This study is present the result of synthesizing crosslinked anion exchange (CAX) resin bearing quaternary ammonium functionalities. Crosslinked anion exchange of poly(HEMA-co-EGDMA-co-VBC) were synthesized via the modified suspension polymerization technique, then treated in hyper-crosslinking reaction to increase specific surface area (SSA) of CAX beads resin from ~5 to 124 m2/g and followed by amination treatment with N,N-dimethylbutylaminee (DMBA) to obtain CAX resin. After functionalized process, the amount of nitrogen content increased and intensity at 1265 cm-1 that assigned for chloromethyl group has decreased, showing that DMBA successfully being attached to the backbone. CAX resin was fully characterized by using Scanning Electron Microscopy (SEM), and Fourier Transform Infrared Spectroscopy (FT-IR) respectively. A pre-evaluation study was carried to investigate the performance of CAX beads resin to remove nitrate by using ion exchange method. Three parameters were used to study the sorption process; contact time, influent concentration and amount of resin used. For overall sorption, the sorption managed to obtain 88 % nitrate removal by using 0.5 g of CAX resin at 50 ppm influent concentration within 1-hour contact time and the highest adsorption of CAX achieved was 93 % removal of nitrate ions within 4-hours contact time.


2013 ◽  
Vol 295-298 ◽  
pp. 87-90
Author(s):  
Wei Ming Mo ◽  
Wang Li ◽  
Cai Yan Kang ◽  
Min Jun Zhang ◽  
Yu Long Lun ◽  
...  

A new type of anion exchange resin was prepared from cassava stalk (CS) after reaction with epichlorohydrin and dimethylamine in the presence of pyridine and N,N-dimethylformamide. In order to obtain the optimal conditions for the preparation of cassava stalk anion exchanger (CS-AE), the single influential factor experiments were carried out, with nitrate removal efficiency as indicator. Factors like dosage of CS and catalyst, experimental temperatures were examined. The results indicated that the optimal synthesis reaction parameters of dosages were CS: pyridine: dimethylamine = 2 g: 30 ml: 35 ml. The optimal experimental temperature was 100 °C; the catalytic temperature was a key factor in the preparation of CS-AE.


2015 ◽  
Vol 81 (15) ◽  
pp. 4976-4983 ◽  
Author(s):  
Michael P. Thorgersen ◽  
W. Andrew Lancaster ◽  
Brian J. Vaccaro ◽  
Farris L. Poole ◽  
Andrea M. Rocha ◽  
...  

ABSTRACTThe concentrations of molybdenum (Mo) and 25 other metals were measured in groundwater samples from 80 wells on the Oak Ridge Reservation (ORR) (Oak Ridge, TN), many of which are contaminated with nitrate, as well as uranium and various other metals. The concentrations of nitrate and uranium were in the ranges of 0.1 μM to 230 mM and <0.2 nM to 580 μM, respectively. Almost all metals examined had significantly greater median concentrations in a subset of wells that were highly contaminated with uranium (≥126 nM). They included cadmium, manganese, and cobalt, which were 1,300- to 2,700-fold higher. A notable exception, however, was Mo, which had a lower median concentration in the uranium-contaminated wells. This is significant, because Mo is essential in the dissimilatory nitrate reduction branch of the global nitrogen cycle. It is required at the catalytic site of nitrate reductase, the enzyme that reduces nitrate to nitrite. Moreover, more than 85% of the groundwater samples contained less than 10 nM Mo, whereas concentrations of 10 to 100 nM Mo were required for efficient growth by nitrate reduction for twoPseudomonasstrains isolated from ORR wells and by a model denitrifier,Pseudomonas stutzeriRCH2. Higher concentrations of Mo tended to inhibit the growth of these strains due to the accumulation of toxic concentrations of nitrite, and this effect was exacerbated at high nitrate concentrations. The relevance of these results to a Mo-based nitrate removal strategy and the potential community-driving role that Mo plays in contaminated environments are discussed.


Sign in / Sign up

Export Citation Format

Share Document