Chapter 4 Surface Altered Alumino-Silicate Resin (Zeolite-Y) for Remediation of Oil Spillage

Author(s):  
H. Kinney ◽  
M.L. Occelli ◽  
S.A.C. Gould

For this study we have used a contact mode atomic force microscope (AFM) to study to topography of fluidized cracking catalysts (FCC), before and after contamination with 5% vanadium. We selected the AFM because of its ability to well characterize the surface roughness of materials down to the atomic level. It is believed that the cracking in the FCCs occurs mainly on the catalysts top 10-15 μm suggesting that the surface corrugation could play a key role in the FCCs microactivity properties. To test this hypothesis, we chose vanadium as a contaminate because this metal is capable of irreversibly destroying the FCC crystallinity as well as it microporous structure. In addition, we wanted to examine the extent to which steaming affects the vanadium contaminated FCC. Using the AFM, we measured the surface roughness of FCCs, before and after contamination and after steaming.We obtained our FCC (GRZ-1) from Davison. The FCC is generated so that it contains and estimated 35% rare earth exchaged zeolite Y, 50% kaolin and 15% binder.


Author(s):  
Andrey V. Zakharchenko ◽  
◽  
Alexander E. Gonchar ◽  
Roman Y. Shestakov ◽  
Polina V. Pugacheva ◽  
...  

The procedure for action in cases of a threat or an accident at oil pipeline transport facilities is defined in the relevant plans for emergency spillage prevention and response – ESPR. The purpose of the article is to analyze the requirements of the legislation in the field of development and approval of ESPR. The specifics of ESRP development at trunk pipeline facilities in Russia are noted, the US experience in combating oil and oil products spillage is presented. The problematic issues in the development and approval of ESRP, relevant for the domestic system of main oil pipeline transport, have been considered. It was established that the Federal Law No. 207-FL, adopted in July 2020, fundamentally changed the outdated and required revision approach to the coordination and approval of ESRP. At the same time, further work is needed to create a regulatory framework that establishes requirements for ESRP, as well as to improve ESRP, taking into account modern methods of predicting accidents, identifying emergencies, risk-oriented approaches to planning measures to localize and eliminate accidents, the specifics of operating organizations.


2020 ◽  
Vol 17 (2) ◽  
pp. 117-130 ◽  
Author(s):  
Mehdi Kalhor ◽  
Zohre Zarnegar ◽  
Zahra Seyedzade ◽  
Soodabeh Banibairami

Background: SO3H-functionalized zeolite-Y was prepared and used as a catalyst for the synthesis of 2-aryl-N-benzimidazole-4-thiazolidinones and tri-substituted imidazoles at ambient conditions. Objective: The goals of this catalytic method include excellent yields and high purity, inexpensive procedure and ease of product isolation, the use of nontoxic and heterogeneous acid catalyst, shorter reaction times and milder conditions. Materials and Methods: NMR spectra were recorded on Brucker spectrophotometer using Me4Si as internal standard. Mass spectra were recorded on an Agilent Technology 5975C VL MSD with tripe-axis detector. FTIR spectra were obtained with KBr disc on a galaxy series FT-IR 5000 spectrometer. The surface morphology of nanostructures was analyzed by FE-SEM (EVO LS 10, Zeiss, Carl Zeiss, Germany). BET analysis were measured at 196 °C by a Japan Belsorb II system after the samples were vacuum dried at 150°C overnight. Results: The NSZ was characterized by FT-IR, FESEM, EDX, XRF, and BET. The catalytic activity of NSZ was investigated for synthesis of 1,3-tiazolidin-4-ones in H2O/Acetone at room temperature. Moreover, NSZ was used for synthesis of tri-substituted imidazoles at 60 °C via solvent-free condensation. Different kinds of aromatic aldehydes were converted to the corresponding of products with good to excellent yields. Conclusion: Sulfonated zeolite-Y was as an efficient catalyst for the preparation of N-benzimidazole-2-aryl-1,3- thiazolidin-4-ones and 2,4,5-triaryl-1H-imidazoles. High reaction rates, elimination toxic solvent, simple experimental procedure and reusability of the catalyst are the important features of this protocol.


Author(s):  
Monica Dapiaggi ◽  
Marco Alloni ◽  
Riccardo Carli ◽  
Nicola Rotiroti ◽  
Giorgia Confalonieri

Abstract The paper presents a quick method for the quantification of nickel species in spent FFC catalysts; the quantification of known quantities NiO and $$\hbox{NiAl}_2\hbox{O}_{4}$$ NiAl 2 O 4 is first done in a matrix of fresh zeolite Y, and then in a complex matrix, similar to the one of a real spent catalyst. The method is carefully checked and the errors in the quantification are critically evaluated. After the validation of the method with known quantities of NiO, well below the law limit for direct re-use, a set of real spent catalysts (representative of a period of 12 months) is analysed. Graphic Abstract


Author(s):  
Yu-Hong Kang ◽  
Xian-Yong Wei ◽  
Xiao-Qi Zhang ◽  
Yan-Jun Li ◽  
Guang-Hui Liu ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document