Abstract
In the last few years as the road construction budget has been decreasing in Latvia, the number of road construction reinforcement design and construction objects has been increasing. At the beginning of the project development of the existing road condition is assessed, taking into account various pavement evaluation criteria and it is determined on which road sections it is possible to reinforce the pavement and where full construction is required. The road pavement structure in Latvia is developed using “Recommendations for road design. Pavement” and inaccurately defining the bearing capacity of the existing foundation can significantly affect the service life of the designed structure. During the construction of the road, establishing that the bearing capacity of the existing foundation is lower than specified in the project incurs additional costs for the customer. Project changes are made, and special solutions are provided in order to achieve the bearing capacity on the mineral material layers defined in the project. One of the most accurate ways to determine the bearing capacity of existing road structural layers is the static plate test. However, the results of this test are also not 100% accurate and any of them may give unreasonable results due to various influencing factors. The aim of this work is to analyze the results of static plate test by determining the most important factors that affect the obtained load-bearing capacity values, identify biased/erroneous test results, and determine which results reflect the residual load-bearing capacity of the existing road structure.
Degradation of Axial Ultimate Load-Bearing Capacity of Circular Thin-Walled Concrete-Filled Steel Tubular Stub Columns after Corrosion