scholarly journals Dynamic response of rigid pavement under moving traffic load with variable velocity

2016 ◽  
Vol 2016 ◽  
pp. 1-9 ◽  
Author(s):  
Mohamed Gibigaye ◽  
Crespin Prudence Yabi ◽  
I. Ezéchiel Alloba

This work presents the dynamic response of a pavement plate resting on a soil whose inertia is taken into account in the design of pavements by rational methods. Thus, the pavement is modeled as a thin plate with finite dimensions, supported longitudinally by dowels and laterally by tie bars. The subgrade is modeled via Pasternak-Vlasov type (three-parameter type) foundation models and the moving traffic load is expressed as a concentrated dynamic load of harmonically varying magnitude, moving straight along the plate with a constant acceleration. The governing equation of the problem is solved using the modified Bolotin method for determining the natural frequencies and the wavenumbers of the system. The orthogonal properties of eigenfunctions are used to find the general solution of the problem. Considering the load over the center of the plate, the results showed that the deflections of the plate are maximum about the middle of the plate but are not null at its edges. It is therefore observed that the deflection decreased 18.33 percent when the inertia of the soil is taken into account. This result shows the possible economic gain when taking into account the inertia of soil in pavement dynamic design.


2014 ◽  
Vol 140 (4) ◽  
pp. 06014001 ◽  
Author(s):  
Mingliang Li ◽  
Tao Qian ◽  
Yang Zhong ◽  
Hua Zhong

2021 ◽  
Author(s):  
Huan Chen

Different approaches are usually taken when designing flexible and rigid pavement: the rigid concrete slab carries major portion of the traffic load; while for flexible pavement, external loads are distributed to the subgrade because of the relatively low modulus of elasticity of asphalt layer comparing to concrete in the case of rigid pavement. Pavement engineering has gone through major developments; the transition from Empirical Design Method to Mechanistic-Empirical Methods is becoming a near-future trend. The Mechanistic-Empirical Method has two components: (1) stress, strain and deflection are calculated based on analyzing mechanical characteristics of materials; (2) critical pavement distresses are quantitatively predicted by experimental calibrated equations. Hence, stress analysis has become an important role in pavement engineering. The most practical and widely used stress analysis method for flexible pavement is Burmister's Elastic Layered Theory; and for analyzing rigid pavement is Finite Element Method. KENSLABS and STAAD-III are both Finite Element software; KENSLABS is designed specifically for concrete pavement stress analysis, therefore it is more user-frielndly for pavement design; STAAD-III is more suitable for general plane and space structures. The project compares the use of both software for stress analysis in rigid pavement in term of simplicity and precision.


2019 ◽  
Vol 37 (4) ◽  
pp. 4811-4818
Author(s):  
Junhui Luo ◽  
Xianlin Liu ◽  
Decai Mi ◽  
Deqiang Chen ◽  
Zhifen He ◽  
...  

2021 ◽  
Vol 26 (2) ◽  
pp. 212-219
Author(s):  
Nuroji Nuroji ◽  
Bagus Hario Setiadji ◽  
Wahyu Aktorina

The rigid pavement on many roads is considered as a solution due to the increasing traffic load that requires high performance and durability of the road construction. However, the implementation of rigid pavement takes a longer time to reach its concrete strength until the road operation. Some industries have developed pavement from precast concrete panels to reduce construction time. This paper discusses the comparison of rigid pavement between precast concrete and conventional concrete. Two road sections are Jalan Margomulyo Surabaya using precast-concrete-pavement and Jalan Semarang-Jambu using conventional-concrete-pavement chosen as research objects. Cost, construction time, serviceability, and traffic performance are the four variables reviewed in this study analyzed using the Analytical Hierarchy Process (AHP) method with considers 15 competent experts as respondents. Based on the analysis shows that a road improvement project by using precast-pavement is more effective and efficient with a score of 58.42 %, while the score of conventional concrete is 41.58 %.


2020 ◽  
Vol 2020 ◽  
pp. 1-12
Author(s):  
Wei Bai ◽  
Kun Mu ◽  
Lingwei Kong ◽  
Wenbo Zhang ◽  
Xiu Yue

Field tests were carried out on the compacted lateritic soil subgrade of Laibin-Mashan expressway in Guangxi Province to obtain the vertical vibration acceleration and dynamic stress amplitude of each test point under different axle loads and different driving speeds. The distribution law of the dynamic response and its frequency domain characteristics obtained by wavelet analysis emerged. The vibration of the subgrade is clearly aggravated by the increase of speed and load. Specifically, the acceleration of vehicle speed from 20 km/h to 40 km/h has a prominent effect on the vibration of subgrade, and the influence of speed on the vibration of subgrade decreases with subgrade depth. The acceleration has the greatest impact on the vibration energy in the third and fourth frequency bands.


2011 ◽  
Vol 97-98 ◽  
pp. 40-44 ◽  
Author(s):  
Chuan Yi Zhuang ◽  
Ai Qin Shen ◽  
Lin Wang

In order to evaluate pavement dynamic responses accurately under truck loading, the full-scale asphalt pavement accelerated loading facility (ALF) was used. 10 strain gauges and 2 soil pressure cells were installed; temperature sensors were also installed in the different depth of the HMA layer. Pavement response was measured under real traffic load with ALF. The measured pavement responses are compared between the pavement sections to evaluate the effects of various experimental factors, such as axle load, speed, et al. Dynamic strain at the bottom of HMA layer and vertical compressive stress on the top of the subgrade were examined in the full-scale testing road, the regression models between dynamic response and axle load, dynamic response and speed were put forward respectively. Studies show that there is not only tensile strain but also compressive strain in the dynamic response, and the strain response is in the station of tension and compression alternation. Under the intermediate temperature, the strain response at the bottom of the asphalt layer is increased linearly with the increase of axle load and the vertical compressive stresses at the top of the subgrade is also increased with the increase of axle load. Speed has a great effect on strain response at the bottom of HMA layer, and has little effect on vertical compressive stress, it affects the loading duration of stress only. The destroy for the pavement by low speed and heavy load is more serious than that is normal.


Sign in / Sign up

Export Citation Format

Share Document