A Study of Six-Speed Gear Trains with Eight Gears

1969 ◽  
Vol 11 (2) ◽  
pp. 143-150 ◽  
Author(s):  
D. J. Sanger ◽  
G. White
Keyword(s):  
Gear Train ◽  
Speed Reduction ◽  
Minimum Number ◽  
Gear Trains

It is shown that six-speed gear trains with the minimum number of gears, i.e. eight gears, can be divided into categories which are suitable for overdrive ratios or speed reduction ratios. One gear train from each category is examined and its characteristics and design limits discussed. A technique for computing solutions is outlined and a few typical solutions are given.

A Lightweight Split-Torque Transmission for a 330 KW Helicopter

1982 ◽  
Vol 196 (1) ◽  
pp. 11-22 ◽  
Author(s):  
G White
Keyword(s):  
Gear Train ◽  
Main Rotor ◽  
Speed Reduction ◽  
Torque Transmission ◽  
Current Production ◽  
Gear Trains ◽  
Fixed Axis ◽  
Three Stages ◽  
A Current ◽  
Split Torque

A simple split-torque gear train is used as the main rotor transmission of a single-engine helicopter. Overall speed reduction ratio achieved is 103:1 between the engine at a nominal 36 000 rev/min and the main rotor at 350 rev/min. This ratio is generated from three stages of fixed-axis gear trains containing only eight gears. Alternative configurations are outlined and discussed. Comparison with a current production design shows the split torque arrangement offers reductions in weight, height, and drive train losses. A low total of gears and bearings offers the potential for improved reliability.

A General Theory of Composite Gear Trains

1969 ◽  
Vol 184 (1) ◽  
pp. 1063-1074
Author(s):  
D. J. Sanger ◽  
G. White
Keyword(s):  
General Theory ◽  
Gear Train ◽  
Unified Theory ◽  
Index Numbers ◽  
Minimum Number ◽  
Gear Trains

Some basic gear arrangements which use a minimum number of gears are noted; the gear pairs in these composite gear trains are seen to be interdependent. A general and widely applicable method of gear train analysis is developed. Expressions and index numbers are deduced which define optimum designs and the gear sizes for optimum or other design points. The analysis is extended to include gears external to the composite gear sections, so providing a unified theory which covers all known and feasible minimum-gear arrangements based on three shafts. An example of application is included.

A New Technique Based on Loops to Investigate Displacement Isomorphism in Planetary Gear Trains

2002 ◽  
Vol 124 (4) ◽  
pp. 662-675 ◽  
Author(s):  
V. V. N. R. Prasad Raju Pathapati ◽  
A. C. Rao
Keyword(s):  
Graph Isomorphism ◽  
Planetary Gear ◽  
Degree Of Freedom ◽  
Gear Train ◽  
Graph Representation ◽  
Kinematic Structure ◽  
Graph Representations ◽  
Planetary Gear Trains ◽  
Gear Trains ◽  
A New Technique

The most important step in the structural synthesis of planetary gear trains (PGTs) requires the identification of isomorphism (rotational as well as displacement) between the graphs which represent the kinematic structure of planetary gear train. Previously used methods for identifying graph isomorphism yielded incorrect results. Literature review in this area shows there is inconsistency in results from six link, one degree-of-freedom onwards. The purpose of this paper is to present an efficient methodology through the use of Loop concept and Hamming number concept to detect displacement and rotational isomorphism in PGTs in an unambiguous way. New invariants for rotational graphs and displacement graphs called geared chain hamming strings and geared chain loop hamming strings are developed respectively to identify rotational and displacement isomorphism. This paper also presents a procedure to redraw conventional graph representation that not only clarifies the kinematic structure of a PGT but also averts the problem of pseudo isomorphism. Finally a thorough analysis of existing methods is carried out using the proposed technique and the results in the category of six links one degree-of-freedom are established and an Atlas comprises of graph representations in conventional form as well as in new form is presented.

Topological Synthesis of Epicyclic Gear Trains Using Vertex Incidence Polynomial

2017 ◽  
Vol 139 (6) ◽  
Author(s):  
Vinjamuri Venkata Kamesh ◽  
Kuchibhotla Mallikarjuna Rao ◽  
Annambhotla Balaji Srinivasa Rao
Keyword(s):  
High Velocity ◽  
Mechanical Energy ◽  
Gear Train ◽  
Recursive Method ◽  
Gear Pair ◽  
Simple Method ◽  
Epicyclic Gear ◽  
Thick Line ◽  
Gear Trains ◽  
Isomorphic Graphs

Epicyclic gear trains (EGTs) are used in the mechanical energy transmission systems where high velocity ratios are needed in a compact space. It is necessary to eliminate duplicate structures in the initial stages of enumeration. In this paper, a novel and simple method is proposed using a parameter, Vertex Incidence Polynomial (VIP), to synthesize epicyclic gear trains up to six links eliminating all isomorphic gear trains. Each epicyclic gear train is represented as a graph by denoting gear pair with thick line and transfer pair with thin line. All the permissible graphs of epicyclic gear trains from the fundamental principles are generated by the recursive method. Isomorphic graphs are identified by calculating VIP. Another parameter “Rotation Index” (RI) is proposed to detect rotational isomorphism. It is found that there are six nonisomorphic rotation graphs for five-link one degree-of-freedom (1-DOF) and 26 graphs for six-link 1-DOF EGTs from which all the nonisomorphic displacement graphs can be derived by adding the transfer vertices for each combination. The proposed method proved to be successful in clustering all the isomorphic structures into a group, which in turn checked for rotational isomorphism. This method is very easy to understand and allows performing isomorphism test in epicyclic gear trains.

Meshing Efficiency Analysis of Two Degree-of-Freedom Epicyclic Gear Trains

2016 ◽  
Vol 138 (8) ◽  
Author(s):  
Essam Lauibi Esmail
Keyword(s):  
Reference Frame ◽  
Power Efficiency ◽  
Power Flow ◽  
Flow Direction ◽  
Efficiency Analysis ◽  
Degree Of Freedom ◽  
Gear Train ◽  
Epicyclic Gear ◽  
Gear Trains ◽  
Two Degree Of Freedom

The concept of potential power efficiency is introduced as the efficiency of an epicyclic gear train (EGT) measured in any moving reference frame. The conventional efficiency can be computed in a carrier-moving reference frame in which the gear carrier appears relatively fixed. In principle, by attaching the reference frame to an appropriate link, torques can be calculated with respect to each input, output, or (relatively) fixed link in the EGT. Once the power flow direction is obtained from the potential power ratio, the torque ratios are obtained from the potential power efficiencies, the particular expression of the efficiency of the EGT is found in a simple manner. A systematic methodology for the efficiency analysis of one and two degree-of-freedom (DOF) EGTs is described, and 14 ready-to-use efficiency formulas are derived for 2DOF gear pair entities (GPEs). This paper includes also a discussion on the redundancy of the efficiency formulas used for 1DOF GPEs. An incomplete in the efficiency formulas in previous literature, which make them susceptible to wrong application, is brought to light.

Signal Flow Graphs for Spatial Gear Trains

1994 ◽  
Vol 116 (1) ◽  
pp. 326-331 ◽  
Author(s):  
R. Ma ◽  
K. C. Gupta
Keyword(s):  
Operations Research ◽  
Equations Of Motion ◽  
Planetary Gear ◽  
Gear Train ◽  
Signal Flow ◽  
Signal Flow Graphs ◽  
Planetary Gear Trains ◽  
Gear Trains ◽  
System Variables ◽  
Flow Graphs

Signal flow graphs (SFG) have been applied in many areas such as circuit analysis, controls, mechanical vibrations, statistics, and operations research. They have also been applied to the analysis of planetary gear trains which are planar, i.e., where all of the gear axes are parallel. In this paper, signal flow graphs are applied to spatial planetary gear trains. Some additional terminology and rules which are needed for this important application are developed in this paper and illustrated by examples. The significance of applying SFG to a gear system is that the graph describes the interrelationship among the system variables by linking causes and effects, offers the information about the topology of system connection, and the kinematic equations of motion can be written easily by inspection. In this way, it helps use to visualize and understand spatial gear train systems better.

Conceptual Design of Gear Differentials for Automotive Vehicles

1994 ◽  
Vol 116 (2) ◽  
pp. 565-570 ◽  
Author(s):  
Hong-Sen Yan ◽  
Long-Chang Hsieh
Keyword(s):  
Conceptual Design ◽  
Degrees Of Freedom ◽  
Planetary Gear ◽  
Gear Train ◽  
Design Constraints ◽  
Two Degrees Of Freedom ◽  
Design Concepts ◽  
Planetary Gear Trains ◽  
Gear Trains ◽  
Gear Differential

An automotive gear differential is a joint-fractionated planetary gear train with two degrees-of-freedom. We summarize the characteristics of planetary gear trains and the design constraints of noncoupled automotive gear differentials to synthesize their corresponding kinematic graphs. Based on these graphs and the proposed respecializing process, we generate the atlas of design concepts for automotive gear differentials with any types of gear pairs. As a result, there are 4, 25, and 156 design concepts for five-, six-, and seven-bar automotive gear differentials, respectively.

scholarly journals 3D-Modeling and Motion Simulation of Composite Wheel Gears Transmission Based on UG

2018 ◽  
Vol 175 ◽  
pp. 03006
Author(s):  
Mingxia Zhao
Keyword(s):  
3D Modeling ◽  
Rotational Speed ◽  
Spur Gear ◽  
Transmission Mechanism ◽  
Gear Train ◽  
Gear Pair ◽  
Calculation Formula ◽  
Motion Simulation ◽  
Gear Trains ◽  
Simulation Parameters

Taking the compound gear trains as an example, the principle of the transmission mechanism was analyzed, and the rotational speed of the key gears in the compound gear trains was calculated by using the calculation formula of transmission ratio to obtain the simulation parameters of UG movement. The gear tool box in UG was applied to complete the modeling and meshing assembly of the bevel gear and spur gear, the rotation pair and gear pair was to motion simulation, the gear transmission state could have visually observed by motion simulation, and then the chart was analyzed to verify the design rationality of the gear train.

Conditions for Self-Locking in Planetary Gear Trains

2006 ◽  
Vol 129 (9) ◽  
pp. 960-968 ◽  
Author(s):  
David R. Salgado ◽  
J. M. del Castillo
Keyword(s):  
Planetary Gear ◽  
Degree Of Freedom ◽  
The Self ◽  
Gear Train ◽  
Planetary Gear Train ◽  
Analytical Expression ◽  
Planetary Gear Trains ◽  
Input And Output ◽  
Approximate Relationship ◽  
Gear Trains

The objective of the present work is to determine the conditions that have to be satisfied for a planetary gear train of one degree of freedom to be self-locking. All planetary gear trains of up to six members are considered. As a result, we show the constructional solutions of planetary gear trains exhibiting self-locking. Unlike other studies, the self-locking conditions are obtained systematically from the analytical expression for the product of the efficiency of a given train by the efficiency of the train resulting from interchanging its input and output axes. Finally, a proof is given of an approximate relationship between these two efficiencies.

Genetic Algorithm Based Design for Gear Trains

2000 ◽  
Author(s):  
Tae Hyong Chong ◽  
Joung Sang Lee
Keyword(s):  
Genetic Algorithm ◽  
Optimum Design ◽  
Initial Guess ◽  
Gear Train ◽  
Design System ◽  
Contact Ratio ◽  
Design Factor ◽  
Integer Variables ◽  
Gear Trains ◽  
Volume Size

Abstract The design of gear train is a kind of mixed problems which have to determine various types of design variables; i.e., continuous, discrete, and integer variables. Therefore, the most common practice of optimum design using the derivative of objective function has difficulty in solving those kinds of problems and the optimum solution also depends on initial guess because there are many sophisticated constraints. In this study, the Genetic Algorithm is introduced for the optimum design of gear trains to solve such problems and we propose a genetic algorithm based gear design system. This system is applied for the geometrical volume (size) minimization problem of the two-stage gear train and the simple planetary gear train to show that genetic algorithm is better than the conventional algorithms for solving the problems that have continuous, discrete, and integer variables. In this system, each design factor such as strength, durability, interference, contact ratio, etc. is considered on the basis of AGMA standards to satisfy the required design specification and the performance with minimizing the geometrical volume (size) of gear trains.

Sign in / Sign up

Export Citation Format

Share Document