Study on the Condition of COD Removal from Corn Starch Wastewater by Flocculation

2021 ◽  
Vol 09 (02) ◽  
pp. 53-63
Author(s):  
继柱 周
Author(s):  
Collins N. Nwaokocha ◽  
Solomon O. Giwa ◽  
Abayomi T. Layeni ◽  
Sidikat I. Kuye ◽  
Olusegun D. Samuel ◽  
...  

Desalination ◽  
2011 ◽  
Vol 279 (1-3) ◽  
pp. 285-290 ◽  
Author(s):  
Beatriz Cancino-Madariaga ◽  
Juan Aguirre

2016 ◽  
Vol 96 ◽  
pp. 1135-1141 ◽  
Author(s):  
Shaojie Wang ◽  
Ting Zhang ◽  
Haijia Su

2013 ◽  
Vol 864-867 ◽  
pp. 1675-1679
Author(s):  
Xiao Tong Liu ◽  
Sheng Gao Cheng ◽  
Yi Shi ◽  
Yin Wang

This paper is based on using coagulation--Fenton oxidation treat the corn starch wastewater, to determine the best conditions of coagulation and oxidation. Experimental results show that at the first coagulation stage, determining polyaluminium chloride (PAC) as the optimal coagulant and optimal dosing quantity of 10ml·L-1, PAC and coagulant aid polyacrylamide (PAM) dosing quantity proportion is 2:2, pH=7, the temperature of 35 °C, CODCr removal effect is best; at Fenton oxidation stage, Fe2+/ H2O2 is 2:5, CODCr removal efficiency; At the second coagulation stage, PAC and PAM dosing quantity is 70 ml·L-1, CODCr removal effectiency. The processing method has good treatment effect, it can reduce the CODCr, SS and chroma of wastewater, and eventually recycle the SS as amyloid protein and used for subsequent product production. Meanwhile, the processing method improves the economic benefit and has a high removal rate. The equipment is simple, and just cover a small area, it’s easy to operate, and doesn’t produce secondary pollution, etc.


Author(s):  
Wei Hong ◽  
Zengguo Zhang ◽  
Shihua Liang ◽  
Guangbo Hong ◽  
Xiaopei Jin ◽  
...  

2021 ◽  
Vol 1 (10 (109)) ◽  
pp. 6-13
Author(s):  
Prayitno Prayitno ◽  
Sri Rulianah ◽  
Windi Zamrudy ◽  
Sugeng Hadi Susilo

The cassava starch wastewater contains organic materials (as BOD, COD) in high concentrations so it has the potential to cause pollution in the aquatic environment. Several methods of cassava starch wastewater treatment have been used to reduce the concentration of organic matter (pollutants) in cassava starch wastewater, including Activated Sludge, Stabilization Pond, Anaerobic-Aerobic filter process. However, various studies continue to be carried out to get higher processing efficiency on the factors that influence it. Several factors influence the efficiency of wastewater treatment processes, including the type and origin of decomposing microorganisms, hydraulic residence time (HRT), organic load rate (OLR), process design, pH, and temperature. The research aimed to evaluate the performance of the AnF2B reactor in treating cassava starch wastewater, in which the reactor performance is shown by changes in organic matter removal (COD removal) and biogas production. The research is conducted using 3 types of AnF2B reactors wherein each AnF2B reactor contains a bee nest-shaped bio-filter as a growth medium for the consortium of indigenous bacteria. The AnF2B reactor operates in anaerobic conditions with a set temperature of 29–30 °C and a pH of 4.5–7. In each AnF2B reactor, cassava starch wastewater is fed with different OLR so that each reactor has an HRT of 5, 6, and 7 days. The concentration of COD at the influent and effluent of the reactor was measured and the biogas was produced using the APHA standard method. The results showed that the AnF2B reactor had a satisfactory performance in COD removal and biogas production, which at HRT: 6 days and OLR of 1.72 g/L·day found that the maximum COD removal was 98 % and the volume of biogas of 4.8 L/L·day was produced on the 12th day


2010 ◽  
Vol 13 (3) ◽  
pp. 92-102
Author(s):  
Trung Duc Le

The industrial production of ethanol by fermentation using molasses as main material that generates large quantity of wastewater. This wastewater contains high levels of colour and chemical oxygen demand (COD), that may causes serious environmental pollution. Most available treatment processes in Vietnam rely on biological methods, which often fail to treat waste water up to discharge standard. As always, it was reported that quality of treated wastewater could not meet Vietnameses discharge standard. So, it is necessary to improve the treatment efficiency of whole technological process and therefore, supplemental physico-chemical treatment step before biodegradation stage should be the appropriate choice. This study was carried out to assess the effect of coagulation process on decolourization and COD removal in molasses-based ethanol production wastewater using inorganic coaglutant under laboratory conditions. The experimental results showed that the reductions of COD and colour with the utilization of Al2(SO4)3 at pH 9.5 were 83% and 70%, respectively. Mixture FeSO4 – Al2(SO4)3 at pH 8.5 reduced 82% of colour and 70% of COD. With the addition of Polyacrylamide (PAM), the reduction efficiencies of colour, COD and turbidity by FeSO4 – Al2(SO4)3 were 87%, 73.1% and 94.1% correspondingly. It was indicated that PAM significantly reduced the turbidity of wastewater, however it virtually did not increase the efficiencies of colour and COD reduction. Furthermore, the coagulation processes using PAM usually produces a mount of sludge which is hard to be deposited.


2016 ◽  
Author(s):  
Cigdem Kilicarislan Ozkan ◽  
Hasan Ozgunay ◽  
Stefania Marin ◽  
Madalina Georgiana Albu Kaya

Sign in / Sign up

Export Citation Format

Share Document