scholarly journals CFD model of single-mode microwave – assisted biodiesel production via transesterification reaction of refined palm stearin using one-way coupling method in a batch stirred-tank reactor

Author(s):  
Ahmad Fathur Muhtadin ◽  
Phanida Wanking ◽  
Tawiwan Kangsadan
2020 ◽  
Vol 10 (3) ◽  
pp. 992 ◽  
Author(s):  
Juan P. Castillo Gónzalez ◽  
Peggy E. Álvarez Gutiérrez ◽  
Manuel Adam Medina ◽  
Betty Y. López Zapata ◽  
Gerardo V. Ramírez Guerrero ◽  
...  

Continuous production processes and an adequate supply of raw materials are necessary to satisfy the growing demand for biodiesel. The use of different feed oils could be necessary to ensure sufficient supply for biodiesel production in certain circumstances; however, changing feed oil during the operation of a continuous reactor causes process disturbances. The present study analyses the effect of feed oil changes on the continuous operation of a industrial continuous stirred-tank reactor (CSTR) using a model which takes the dynamics of oil changes into account. The models previously reported only consider the operation of reactor with only one vegetable oil. The model in this work was developed by mass and energy balances. A methodology to model oil changes is presented. Glycerides and esters were characterized using adequate approaches. Moreover, accurate methods for predicting essential properties in the biodiesel manufacturing were used for the estimation of their thermo-physical properties. The kinetic parameters of the transesterifications were calculated from consistent studies selected from an exhaustive literature revision. The results show that temperature is practically not affected after oil changes; however, the ester concentration varies considerably. The ester mass fraction varying by up to 22.07% after an disturbance.


Author(s):  
Giovanilton Ferreira Silva ◽  
Marcio Silva Castro ◽  
Jouciane Sousa Silva ◽  
Jocélia Sousa Mendes ◽  
Andrea Lopes de Oliveira Ferreira

This research examines the transesterification reaction of soybean oil with methanol in order to model and simulate a non-ideal continuous stirred-tank reactor. A mathematical model has been developed for the reactor. The biodiesel production process was optimized by application of factorial design 25 and response surface methodology. Factorial design and response surface analysis were combined with modeling and simulation to determine the operating conditions that maximize biodiesel production and minimize reactor volume. The optimum results obtained were conversion (0.95), molar ratio alcohol/oil (6:1), temperature (60.5 oC), ? (0.75), bypass (0.10) and reactor volume (1,500 L).


1979 ◽  
Vol 44 (7) ◽  
pp. 2184-2195
Author(s):  
Vladimír Herles ◽  
Jan Čermák ◽  
Antonín Havlíček

The paper deals with the analysis of the dynamic behavior of the 1st order system with two random parameters. The theoretical results have been compared with experiments on flow model of a stirred tank reactor.


Sign in / Sign up

Export Citation Format

Share Document