308 Experimental study on the moment of inertia of Straight-Bladed Vertical Axis Wind Turbines

2006 ◽  
Vol 2006.44 (0) ◽  
pp. 97-98
Author(s):  
In-Seung KANG ◽  
Kenichi ARIYASU ◽  
Yutaka HARA ◽  
Tsutomu HAYASHI
Keyword(s):  
Experimental Study ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Moment Of Inertia ◽  
Vertical Axis Wind Turbines ◽  
The Moment

scholarly journals Moment of Inertia Dependence of Vertical Axis Wind Turbines in Pulsating Winds

2012 ◽  
Vol 2012 ◽  
pp. 1-12 ◽  
Author(s):  
Yutaka Hara ◽  
Koichi Hara ◽  
Tsutomu Hayashi
Keyword(s):  
Energy Efficiency ◽  
Wind Turbines ◽  
Simple Structure ◽  
High Efficiency ◽  
Vertical Axis ◽  
Moment Of Inertia ◽  
Vertical Axis Wind Turbines ◽  
Wind Cycle ◽  
The Moment ◽  
The Relationship

Vertical Axis Wind Turbines (VAWTs) are unaffected by changes in wind direction, and they have a simple structure and the potential for high efficiency due to their lift driving force. However, VAWTs are affected by changes in wind speed, owing to effects originating from the moment of inertia. In this study, changes in the rotational speed of a small VAWT in pulsating wind, generated by an unsteady wind tunnel, are investigated by varying the wind cycle and amplitude parameters. It is shown that the responses observed experimentally agree with simulations based on torque characteristics obtained under steady rotational conditions. Additionally, a simple equation expressing the relationship between the rotational change width and amplitude of the pulsating wind is presented. The energy efficiency in a pulsating wind remains constant with changes in both the moment of inertia and the wind cycle; however, the energy efficiency decreases when the wind amplitude is large.

scholarly journals An experimental study of the optimal design parameters of a wind power tower used to improve the performance of vertical axis wind turbines

2018 ◽  
Vol 10 (9) ◽  
pp. 168781401879954
Author(s):  
Soo-Yong Cho ◽  
Sang-Kyu Choi ◽  
Jin-Gyun Kim ◽  
Chong-Hyun Cho
Keyword(s):  
Experimental Study ◽  
Optimal Design ◽  
Wind Turbine ◽  
Wind Power ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Power Coefficient ◽  
Design Parameters ◽  
Vertical Axis Wind Turbine ◽  
Vertical Axis Wind Turbines

In order to augment the performance of vertical axis wind turbines, wind power towers have been used because they increase the frontal area. Typically, the wind power tower is installed as a circular column around a vertical axis wind turbine because the vertical axis wind turbine should be operated in an omnidirectional wind. As a result, the performance of the vertical axis wind turbine depends on the design parameters of the wind power tower. An experimental study was conducted in a wind tunnel to investigate the optimal design parameters of the wind power tower. Three different sizes of guide walls were applied to test with various wind power tower design parameters. The tested vertical axis wind turbine consisted of three blades of the NACA0018 profile and its solidity was 0.5. In order to simulate the operation in omnidirectional winds, the wind power tower was fabricated to be rotated. The performance of the vertical axis wind turbine was severely varied depending on the azimuthal location of the wind power tower. Comparison of the performance of the vertical axis wind turbine was performed based on the power coefficient obtained by averaging for the one periodic azimuth angle. The optimal design parameters were estimated using the results obtained under equal experimental conditions. When the non-dimensional inner gap was 0.3, the performance of the vertical axis wind turbine was better than any other gaps.

scholarly journals Experimental study on novel curved blade vertical axis wind turbines

2020 ◽  
Vol 7 ◽  
pp. 100149
Author(s):  
Kalakanda Alfred Sunny ◽  
Pradeep Kumar ◽  
Nallapaneni Manoj Kumar
Keyword(s):  
Experimental Study ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbines ◽  
Curved Blade

Design Criteria on Sizing and Material Selection of SB-VAWTS

2013 ◽  
Author(s):  
Mojtaba Ahmadi-Baloutaki ◽  
Rupp Carriveau ◽  
David S-K. Ting
Keyword(s):  
Wind Turbines ◽  
Material Selection ◽  
Vertical Axis ◽  
Moment Of Inertia ◽  
Power Coefficient ◽  
Design Parameters ◽  
Speed Ratio ◽  
Design Criteria ◽  
Vertical Axis Wind Turbines ◽  
Selection Of

A design methodology has been presented on the sizing and material selection of straight-bladed vertical axis wind turbines. Several design parameters such as turbine power coefficient, blade tip speed ratio, rotor solidity factor, blade aspect ratio and rotor moment of inertia have been analyzed. Material selection and its relevant design criteria have also been discussed for different parts of a straight-bladed vertical axis wind turbines with three blades and two supporting arms per blade. The number of the supporting arms and their optimum locations have been determined via minimizing the bending moments on the blade. A comparative study has also been performed to examine the effect of blade density and turbine H/D ratio on the rotor moment of inertia. It was found that the turbine rotational speed increases as blade density decreases and this increase is larger at higher turbine H/D ratio.

D104 An Experimental Study of Vertical-Axis Wind Turbines

2008 ◽  
Vol 2008.13 (0) ◽  
pp. 147-150
Author(s):  
Masahiko Suzuki ◽  
Hideto Taniguchi ◽  
Yoshifumi Nishizawa ◽  
Izumi Ushiyama
Keyword(s):  
Experimental Study ◽  
Wind Turbines ◽  
Vertical Axis ◽  
Vertical Axis Wind Turbines

scholarly journals Numerical Analysis of the Dynamic Interaction between Two Closely Spaced Vertical-Axis Wind Turbines

Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2286
Author(s):  
Yutaka Hara ◽  
Yoshifumi Jodai ◽  
Tomoyuki Okinaga ◽  
Masaru Furukawa
Keyword(s):  
Wind Turbines ◽  
Power Distribution ◽  
Phase Synchronization ◽  
Average Power ◽  
Vertical Axis ◽  
Turbine Rotor ◽  
Mean Power ◽  
Vertical Axis Wind Turbines ◽  
Fluid Body ◽  
First Time

To investigate the optimum layouts of small vertical-axis wind turbines, a two-dimensional analysis of dynamic fluid body interaction is performed via computational fluid dynamics for a rotor pair in various configurations. The rotational speed of each turbine rotor (diameter: D = 50 mm) varies based on the equation of motion. First, the dependence of rotor performance on the gap distance (gap) between two rotors is investigated. For parallel layouts, counter-down (CD) layouts with blades moving downwind in the gap region yield a higher mean power than counter-up (CU) layouts with blades moving upwind in the gap region. CD layouts with gap/D = 0.5–1.0 yield a maximum average power that is 23% higher than that of an isolated single rotor. Assuming isotropic bidirectional wind speed, co-rotating (CO) layouts with the same rotational direction are superior to the combination of CD and CU layouts regardless of the gap distance. For tandem layouts, the inverse-rotation (IR) configuration shows an earlier wake recovery than the CO configuration. For 16-wind-direction layouts, both the IR and CO configurations indicate similar power distribution at gap/D = 2.0. For the first time, this study demonstrates the phase synchronization of two rotors via numerical simulation.

Sign in / Sign up

Export Citation Format

Share Document