331 Accuracy of phase angle of frequency response function for Duffing oscillator

2012 ◽  
Vol 2012 (0) ◽  
pp. _331-1_-_331-6_
Author(s):  
Shinji TAMURA ◽  
Kai TERAMOTO
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Phase Angle ◽  
Frequency Response Function ◽  
Duffing Oscillator

scholarly journals Frequency response function simulation and evaluating in boring

2021 ◽  
Vol 5 (3) ◽  
Author(s):  
Maksym Shykhalieiev ◽  
Vadim Medvedev
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Phase Angle ◽  
Frequency Response Function ◽  
Dynamic Stiffness ◽  
Stability Lobe ◽  
Machining Center ◽  
Machining System ◽  
Computer Numerical Simulation ◽  
Stability Lobe Diagrams

Finite element method of simulating frequency response function (FRF) for boring tool in LS-Dyna solver is investigated in this work. Nowadays, computer numerical simulation allows to obtain FRF using different materials model with high precision compared to real experiments with sensors like impact hammer testing. This function is used in construction of stability lobe diagrams that allows operator of machining center to avoid chatter self-excited vibrations. Such vibration is led to decreasing of productivity and quality in cutting of metals and other materials. Amplitude and phase angle for the model is obtained from LS-Dyna result interpreter, that reads binary files, created during simulation by the program. Amplitude and phase angle of frequency response function are depending on dynamic stiffness of machining system. Real and imaginary part of frequency response function have been obtained during simulation. With luck of dynamic stiffness amplitudes of response increases.    

scholarly journals Моделювання амплітудно-фазової частотної функції і її оцінка при розто- чуванні

2021 ◽  
Author(s):  
Maksym Shykhalieiev ◽  
Vadim Medvedev
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Phase Angle ◽  
Frequency Response Function ◽  
Dynamic Stiffness ◽  
Stability Lobe ◽  
Machining Center ◽  
Machining System ◽  
Computer Numerical Simulation ◽  
Stability Lobe Diagrams

Finite element method of simulating frequency response function (FRF) for boring tool in LS-Dyna solver is investigated in this work. Nowadays, computer numerical simulation allows to obtain FRF using different materials model with high precision compared to real experiments with sensors like impact hammer testing. This function is used in construction of stability lobe diagrams that allows operator of machining center to avoid chatter self-excited vibrations. Such vibration is led to decreasing of productivity and quality in cutting of metals and other materials. Amplitude and phase angle for the model is obtained from LS-Dyna result interpreter, that reads binary files, created during simulation by the program. Amplitude and phase angle of frequency response function are depending on dynamic stiffness of machining system.

scholarly journals Road Roughness Estimation Based on the Vehicle Frequency Response Function

Actuators ◽  
2021 ◽  
Vol 10 (5) ◽  
pp. 89
Author(s):  
Qingxia Zhang ◽  
Jilin Hou ◽  
Zhongdong Duan ◽  
Łukasz Jankowski ◽  
Xiaoyang Hu
Keyword(s):  
Frequency Response ◽  
Response Function ◽  
Frequency Response Function ◽  
Gaussian White Noise ◽  
Estimation Method ◽  
Time Shift ◽  
Ride Quality ◽  
The Road ◽  
Road Roughness ◽  
Measured Response

Road roughness is an important factor in road network maintenance and ride quality. This paper proposes a road-roughness estimation method using the frequency response function (FRF) of a vehicle. First, based on the motion equation of the vehicle and the time shift property of the Fourier transform, the vehicle FRF with respect to the displacements of vehicle–road contact points, which describes the relationship between the measured response and road roughness, is deduced and simplified. The key to road roughness estimation is the vehicle FRF, which can be estimated directly using the measured response and the designed shape of the road based on the least-squares method. To eliminate the singular data in the estimated FRF, the shape function method was employed to improve the local curve of the FRF. Moreover, the road roughness can be estimated online by combining the estimated roughness in the overlapping time periods. Finally, a half-car model was used to numerically validate the proposed methods of road roughness estimation. Driving tests of a vehicle passing over a known-sized hump were designed to estimate the vehicle FRF, and the simulated vehicle accelerations were taken as the measured responses considering a 5% Gaussian white noise. Based on the directly estimated vehicle FRF and updated FRF, the road roughness estimation, which considers the influence of the sensors and quantity of measured data at different vehicle speeds, is discussed and compared. The results show that road roughness can be estimated using the proposed method with acceptable accuracy and robustness.

scholarly journals Predicting Dam Flood Discharge Induced Ground Vibration with Modified Frequency Response Function

Water ◽  
2021 ◽  
Vol 13 (2) ◽  
pp. 144
Author(s):  
Yan Zhang ◽  
Jijian Lian ◽  
Songhui Li ◽  
Yanbing Zhao ◽  
Guoxin Zhang ◽  
...  
Keyword(s):  
Frequency Response ◽  
Frequency Distribution ◽  
Response Function ◽  
Frequency Response Function ◽  
Ground Vibration ◽  
Vibration Source ◽  
Ground Vibrations ◽  
High Energies ◽  
Flood Discharge ◽  
Opening Method

Ground vibrations induced by large flood discharge from a dam can damage surrounding buildings and impact the quality of life of local residents. If ground vibrations could be predicted during flood discharge, the ground vibration intensity could be mitigated by controlling or tuning the discharge conditions by, for example, changing the flow rate, changing the opening method of the orifice, and changing the upstream or downstream water level, thereby effectively preventing damage. This study proposes a prediction method with a modified frequency response function (FRF) and applies it to the in situ measured data of Xiangjiaba Dam. A multiple averaged power spectrum FRF (MP-FRF) is derived by analyzing four major factors when the FRF is used: noise, system nonlinearity, spectral leakages, and signal latency. The effects of the two types of vibration source as input are quantified. The impact of noise on the predicted amplitude is corrected based on the characteristics of the measured signal. The proposed method involves four steps: signal denoising, MP-FRF estimation, vibration prediction, and noise correction. The results show that when the vibration source and ground vibrations are broadband signals and two or more bands with relative high energies, the frequency distribution of ground vibration can be predicted with MP-FRF by filtering both the input and output. The amplitude prediction loss caused by filtering can be corrected by adding a constructed white noise signal to the prediction result. Compared with using the signal at multiple vibration sources after superimposed as input, using the main source as input improves the accuracy of the predicted frequency distribution. The proposed method can predict the dominant frequency and the frequency bands with relative high energies of the ground vibration downstream of Xiangjiaba Dam. The predicted amplitude error is 9.26%.

Sign in / Sign up

Export Citation Format

Share Document