scholarly journals Electric bus system with rapid charging at every bus stop using renewable energy

2015 ◽  
Vol 2 (1) ◽  
pp. 13-00085-13-00085
Author(s):  
Takeshi KAWASHIMA
Author(s):  
Hu Zhao ◽  
Shumin Feng ◽  
Yusheng Ci

Sudden passenger demand at a bus stop can lead to numerous passengers gathering at the stop, which can affect bus system operation. Bus system operators often deal with this problem by adopting peer-to-peer service, where empty buses are added to the fleet and dispatched directly to the stop where passengers are gathered (PG-stop). However, with this strategy, passengers at the PG-stop have a long waiting time to board a bus. Thus, this paper proposes a novel mathematical programming model to reduce the passenger waiting time at a bus stop. A more complete stop-skipping model that including four cases for passengers’ waiting time at bus stops is proposed in this study. The stop-skipping decision and fleet size are modeled as a dynamic program to obtain the optimal strategy that minimizes the passenger waiting time, and the optimization model is solved with an improved ant colony algorithm. The proposed strategy was implemented on a bus line in Harbin, China. The results show that, during the evacuation, using the stop-skipping strategy not only reduced the total waiting time for passengers but also decreased the proportion of passengers with a long waiting time (>6 min) at the stops. Compared with the habitual and peer-to-peer service strategies, the total waiting time for passengers is reduced by 31% and 23%, respectively. Additionally, the proportion of passengers with longer waiting time dropped to 43.19% by adopting the stop-skipping strategy, compared with 72.68% with the habitual strategy and 47.5% with the peer-to-peer service strategy.


Author(s):  
Sharmini Nakkela

Abstract: Modern study about utilizing energy from renewable energy sources was stimulus due to emerging oil crisis in older days due to uncontrolled use of conventional energy sources. Renewable Power Generation from wind and solar energy has become a significant proportion for the overall power generation in the grid. High penetration of Renewable Power Generation (RPG’s) effectreliable operation of bulk power system due to fluctuation of frequency and voltage of the network. The main objectives of high penetration of Renewable Power Generations in distribution system are Regulation of voltage, Mitigating voltage fluctuations due to flickers and Frequency control. The design and control of voltage regulation system using smart loads (SL’s) under large penetration of renewable energy system in distribution level is to be studied with the help of FACT devices like Static Compensator (STATCOM) and It is one of the fast active devices with accurate voltage regulation capability and most importantly for the sensitive/critical loads. Electric spring (ES) is proposed as compelling technique for guideline of framework voltage under fluctuating RPG's with next to no guide of correspondence framework [1]. It is a converter-based framework with self-commutated switches in span design, which is associated with non-basic burdens in series to go about as savvy load. These Smart Loads are controlled to direct voltage across basic burdens and hence partaking popular side administration. Expanded entrance of RPG’s, basically factor speed wind energy transformation framework is having impact on voltage and power quality [1][2]. In this paper, A contextual analysis of impact of variable speed wind energy framework on voltage is completed and which is demonstrated with fluctuating breeze speed. Execution examination of keen burdens are to be contrasted and existing receptive power compensator burdens and Improvement in voltage profile on test feeder is directed on a 3 Bus system and 15 Bus system. Keywords: Renewable energy system (RES), Electric spring (ES), STATCOM, Voltage Flicker, Smart load


Author(s):  
Xu Tian ◽  
Wei Wang ◽  
Fei Liu ◽  
Guoyong Liang ◽  
Wei Zhang ◽  
...  

Utilization of renewable energy for the reduction of fuel consumption and green house gas (GHG) emissions in the shipping industry has been increased rapidly in the recent years. Wind energy is a clean renewable energy with no pollution which is abundantly available at sea. This paper proposes two different possible configurations of connecting wind power energy into the ship’s main grid bus system . Wind electrical energy output has been connected to ship’s main ac bus system in one configuration and it is connected to ship’s main dc bus system. Even though Wind assisted ship propulsion (WASP) had been started already in the last decades in the form of wing sails, kites, Flettener rotor etc which could assist auxiliary propulsion of the ships, the application of wind power generator on the ship is not often applied. Therefore this paper has a relevant significance in applying wind electrical energy for the marine electrical power system needs. This paper also reveals the benefits and challenges in the area of onboard wind generation and opens future research possibilities in integrating wind energy into marine industry.


Sign in / Sign up

Export Citation Format

Share Document