Numerical Simulation and Experimental Verification of the Deposition Concentration of an Unmanned Aerial Vehicle

2019 ◽  
Vol 35 (3) ◽  
pp. 367-376 ◽  
Author(s):  
Qiang Shi ◽  
Hanping Mao ◽  
Xianping Guan

Abstract. To analyze the droplet deposition under the influence of the flow field of an unmanned aerial vehicle (UAV), a hand-held three-dimensional (3D) laser scanner was used to scan 3D images of the UAV. Fluent software was used to simulate the motion characteristics of droplets and flow fields under the conditions of a flight speed of 3 m/s and an altitude of 1.5 m. The results indicated that the ground deposition concentration in the nonrotor flow field was high, the spray field width was 2.6 m, and the droplet deposition concentration was 50 to 200 ug/cm2. Under the influence of the rotor flow field, the widest deposition range of droplets reached 12.8 m. Notably, the droplet deposition uniformity worsened, and the concentration range of the droplet deposition was 0 to 500 ug/cm2. With the downward development of the downwash flow field, the overall velocity of the flow field gradually decreased, and the influence interval of the flow field gradually expanded. In this article, the droplet concentration was verified under simulated working conditions by a field experiment, thereby demonstrating the reliability of the numerical simulation results. This research could provide a basis for determining optimal UAV operating parameters, reducing the drift of droplets and increasing the utilization rate of pesticides. Keywords: Unmanned aerial vehicle (UAV), Aerial application, Downwash flow field, Droplet deposition, Simulation analysis.

2021 ◽  
Vol 10 (11) ◽  
pp. 738
Author(s):  
Vít Krátký ◽  
Pavel Petráček ◽  
Tiago Nascimento ◽  
Michaela Čadilová ◽  
Milan Škobrtal ◽  
...  

The use of robotic systems, especially multi-rotor aerial vehicles, in the documentation of historical buildings and cultural heritage monuments has become common in recent years. However, the teleoperated robotic systems have significant limitations encouraging the ongoing development of autonomous unmanned aerial vehicles (UAVs). The autonomous robotic platforms provide a more accurate and safe measurement in distant and difficult to access areas than their teleoperated counterpart. Through the use of autonomous aerial robotic systems, access to such places by humans and building of external infrastructures like scaffolding for documentation purposes is no longer necessary. In this work, we aim to present a novel autonomous unmanned aerial vehicle designed for the documentation of hardly attainable areas of historical buildings. The prototype of this robot was tested in several historical monuments comprising scanned objects located in dark and hardly accessible areas in the upper parts of tall naves. This manuscript presents the results from two specific places: the Church of St. Anne and St. Jacob the Great in Stará Voda, and St. Maurice Church in Olomouc, both in the Czech Republic. Finally, we also compare the three-dimensional map obtained with the measurements made by the 3D laser scanner carried onboard UAV against the ones performed by a 3D terrestrial laser scanner.


2021 ◽  
Vol 25 (1) ◽  
pp. 143-154
Author(s):  
Mohd Azwan Abbas ◽  
Khairulazhar Zainuddin ◽  
Norhadija Darwin ◽  
Mohamad Aizat Asyraff Mohamad Azmi ◽  
Yusuf Drisu Opaluwa ◽  
...  

2014 ◽  
Vol 541-542 ◽  
pp. 1288-1291
Author(s):  
Zhi Feng Dong ◽  
Quan Jin Kuang ◽  
Yong Zheng Gu ◽  
Rong Yao ◽  
Hong Wei Wang

Calculation fluid dynamics software Fluent was used to conduct three-dimensional numerical simulation on gas-liquid two-phase flow field in a wet flue gas desulfurization scrubber. The k-ε model and SIMPLE computing were adopted in the analysis. The numerical simulation results show that the different gas entrance angles lead to internal changes of gas-liquid two-phase flow field, which provides references for reasonable parameter design of entrance angle in the scrubber.


Author(s):  
A. Finn ◽  
K. Rogers ◽  
J. Meade ◽  
J. Skinner ◽  
A. Zargarian

<p><strong>Abstract.</strong> An acoustic signature generated by an unmanned aerial vehicle is used in conjunction with tomography to remotely sense temperature and wind profiles within a volume of atmosphere up to an altitude of 120&amp;thinsp;m and over an area of 300&amp;thinsp;m&amp;thinsp;&amp;times;&amp;thinsp;300&amp;thinsp;m. Sound fields recorded onboard the aircraft and by an array of microphones on the ground are compared and converted to sound speed estimates for the ray paths intersecting the intervening medium. Tomographic inversion is then used to transform these sound speed values into three-dimensional profiles of virtual temperature and wind velocity, which enables the atmosphere to be visualised and monitored over time. The wind and temperature estimates obtained using this method are compared to independent measurements taken by a co-located mid-range ZephIR LIDAR and sensors onboard the aircraft. These comparisons show correspondences to better than 0.5&amp;thinsp;&amp;deg;C and 0.3&amp;thinsp;m/s for temperature and wind velocity, respectively.</p>


Author(s):  
Jun Tang ◽  
Jiayi Sun ◽  
Cong Lu ◽  
Songyang Lao

Multi-unmanned aerial vehicle trajectory planning is one of the most complex global optimum problems in multi-unmanned aerial vehicle coordinated control. Results of recent research works on trajectory planning reveal persisting theoretical and practical problems. To mitigate them, this paper proposes a novel optimized artificial potential field algorithm for multi-unmanned aerial vehicle operations in a three-dimensional dynamic space. For all purposes, this study considers the unmanned aerial vehicles and obstacles as spheres and cylinders with negative electricity, respectively, while the targets are considered spheres with positive electricity. However, the conventional artificial potential field algorithm is restricted to a single unmanned aerial vehicle trajectory planning in two-dimensional space and usually fails to ensure collision avoidance. To deal with this challenge, we propose a method with a distance factor and jump strategy to resolve common problems such as unreachable targets and ensure that the unmanned aerial vehicle does not collide into the obstacles. The method takes companion unmanned aerial vehicles as the dynamic obstacles to realize collaborative trajectory planning. Besides, the method solves jitter problems using the dynamic step adjustment method and climb strategy. It is validated in quantitative test simulation models and reasonable results are generated for a three-dimensional simulated urban environment.


Sign in / Sign up

Export Citation Format

Share Document