The Compact Light Source: A Miniature Synchrotron Producing X-rays via Inverse Compton Scattering

2016 ◽  
Author(s):  
Rod Loewen ◽  
Ronald D. Ruth
Keyword(s):  
Compton Scattering ◽  
Light Source ◽  
X Rays ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
Compact Light Source

The Munich Compact Light Source: initial performance measures

2016 ◽  
Vol 23 (5) ◽  
pp. 1137-1142 ◽  
Author(s):  
Elena Eggl ◽  
Martin Dierolf ◽  
Klaus Achterhold ◽  
Christoph Jud ◽  
Benedikt Günther ◽  
...  
Keyword(s):  
Light Source ◽  
Large Scale ◽  
Source Size ◽  
Relativistic Electrons ◽  
X Rays ◽  
Beam Hardening ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
Compact Light Source

While large-scale synchrotron sources provide a highly brilliant monochromatic X-ray beam, these X-ray sources are expensive in terms of installation and maintenance, and require large amounts of space due to the size of storage rings for GeV electrons. On the other hand, laboratory X-ray tube sources can easily be implemented in laboratories or hospitals with comparatively little cost, but their performance features a lower brilliance and a polychromatic spectrum creates problems with beam hardening artifacts for imaging experiments. Over the last decade, compact synchrotron sources based on inverse Compton scattering have evolved as one of the most promising types of laboratory-scale X-ray sources: they provide a performance and brilliance that lie in between those of large-scale synchrotron sources and X-ray tube sources, with significantly reduced financial and spatial requirements. These sources produce X-rays through the collision of relativistic electrons with infrared laser photons. In this study, an analysis of the performance, such as X-ray flux, source size and spectra, of the first commercially sold compact light source, the Munich Compact Light Source, is presented.

Visualization of microvessels by angiography using inverse-Compton scattering X-rays in animal models

2014 ◽  
Vol 21 (6) ◽  
pp. 1327-1332 ◽  
Author(s):  
Toshiharu Fujii ◽  
Naoto Fukuyama ◽  
Chiharu Tanaka ◽  
Yoshimori Ikeya ◽  
Yoshiro Shinozaki ◽  
...  
Keyword(s):  
Compton Scattering ◽  
Photon Number ◽  
High Gain ◽  
Image Sensor ◽  
Clinical Settings ◽  
X Rays ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Small Vessels ◽  
Inverse Compton

The fundamental performance of microangiography has been evaluated using the S-band linac-based inverse-Compton scattering X-ray (iCSX) method to determine how many photons would be required to apply iCSX to human microangiography. ICSX is characterized by its quasi-monochromatic nature and small focus size which are fundamental requirements for microangiography. However, the current iCSX source does not have sufficient flux for microangiography in clinical settings. It was determined whether S-band compact linac-based iCSX can visualize small vessels of excised animal organs, and the amount of X-ray photons required for real time microangiography in clinical settings was estimated. The iCSX coupled with a high-gain avalanche rushing amorphous photoconductor camera could visualize a resolution chart with only a single iCSX pulse of ∼3 ps duration; the resolution was estimated to be ∼500 µm. The iCSX coupled with an X-ray cooled charge-coupled device image sensor camera visualized seventh-order vascular branches (80 µm in diameter) of a rabbit ear by accumulating the images for 5 and 30 min, corresponding to irradiation of 3000 and 18000 iCSX pulses, respectively. The S-band linac-based iCSX visualized microvessels by accumulating the images. An iCSX source with a photon number of 3.6 × 103–5.4 × 104times greater than that used in this study may enable visualizing microvessels of human fingertips even in clinical settings.

scholarly journals Nested Kirkpatrick–Baez (Montel) optics for hard X-rays

2015 ◽  
Vol 48 (2) ◽  
pp. 558-564 ◽  
Author(s):  
Giacomo Resta ◽  
Boris Khaykovich ◽  
David Moncton
Keyword(s):  
Ray Tracing ◽  
Compton Scattering ◽  
Analytical Procedure ◽  
X Rays ◽  
Multilayer Mirrors ◽  
Comprehensive Description ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
Proper Orientation

A comprehensive description and ray-tracing simulations are presented for symmetric nested Kirkpatrick–Baez (KB) mirrors, commonly used at synchrotrons and in commercial X-ray sources. This paper introduces an analytical procedure for determining the proper orientation between the two surfaces composing the nested KB optics. This procedure has been used to design and simulate collimating optics for a hard-X-ray inverse Compton scattering source. The resulting optical device is composed of two 12 cm-long parabolic surfaces coated with a laterally graded multilayer and is capable of collimating a 12 keV beam with a divergence of 5 mrad (FWHM) by a factor of ∼250. A description of the ray-tracing software that was developed to simulate the graded multilayer mirrors is included.

scholarly journals The versatile X-ray beamline of the Munich Compact Light Source: design, instrumentation and applications

2020 ◽  
Vol 27 (5) ◽  
pp. 1395-1414 ◽  
Author(s):  
Benedikt Günther ◽  
Regine Gradl ◽  
Christoph Jud ◽  
Elena Eggl ◽  
Juanjuan Huang ◽  
...  
Keyword(s):  
Light Source ◽  
Phase Contrast ◽  
Phase Contrast Imaging ◽  
Contrast Imaging ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
University Of Munich ◽  
Inverse Compton ◽  
Compact Light Source

Inverse Compton scattering provides means to generate low-divergence partially coherent quasi-monochromatic, i.e. synchrotron-like, X-ray radiation on a laboratory scale. This enables the transfer of synchrotron techniques into university or industrial environments. Here, the Munich Compact Light Source is presented, which is such a compact synchrotron radiation facility based on an inverse Compton X-ray source (ICS). The recent improvements of the ICS are reported first and then the various experimental techniques which are most suited to the ICS installed at the Technical University of Munich are reviewed. For the latter, a multipurpose X-ray application beamline with two end-stations was designed. The beamline's design and geometry are presented in detail including the different set-ups as well as the available detector options. Application examples of the classes of experiments that can be performed are summarized afterwards. Among them are dynamic in vivo respiratory imaging, propagation-based phase-contrast imaging, grating-based phase-contrast imaging, X-ray microtomography, K-edge subtraction imaging and X-ray spectroscopy. Finally, plans to upgrade the beamline in order to enhance its capabilities are discussed.

scholarly journals Quiescent Magnetar Emission: Resonant Compton Upscattering

2004 ◽  
Vol 218 ◽  
pp. 267-270
Author(s):  
Matthew G. Baring
Keyword(s):  
Compton Scattering ◽  
Gamma Ray ◽  
Stellar Surface ◽  
X Rays ◽  
Polar Cap ◽  
Inverse Compton Scattering ◽  
Strong Fields ◽  
Inverse Compton ◽  
Gamma Ray Emission

A principal candidate for quiescent non-thermal gamma-ray emission from magnetars is resonant inverse Compton scattering in the strong fields of their magnetospheres. This paper outlines expectations for such emission, formed from non-thermal electrons accelerated in a pulsar-like polar cap potential upscattering thermal X-rays from the hot stellar surface. The resultant spectra are found to be strikingly flat, with fluxes and strong pulsation that could be detectable by GLAST.

scholarly journals K-edge Subtraction Computed Tomography with a Compact Synchrotron X-ray Source

2019 ◽  
Vol 9 (1) ◽  
Author(s):  
Stephanie Kulpe ◽  
Martin Dierolf ◽  
Benedikt Günther ◽  
Madleen Busse ◽  
Klaus Achterhold ◽  
...  
Keyword(s):  
Computed Tomography ◽  
Contrast Agent ◽  
Imaging Techniques ◽  
X Rays ◽  
Synchrotron Source ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton ◽  
X Ray Computed ◽  
Compact Light Source

Abstract In clinical diagnosis, X-ray computed tomography (CT) is one of the most important imaging techniques. Yet, this method lacks the ability to differentiate similarly absorbing substances like commonly used iodine contrast agent and calcium which is typically seen in calcifications, kidney stones and bones. K-edge subtraction (KES) imaging can help distinguish these materials by subtracting two CT scans recorded at different X-ray energies. So far, this method mostly relies on monochromatic X-rays produced at large synchrotron facilities. Here, we present the first proof-of-principle experiment of a filter-based KES CT method performed at a compact synchrotron X-ray source based on inverse-Compton scattering, the Munich Compact Light Source (MuCLS). It is shown that iodine contrast agent and calcium can be clearly separated to provide CT volumes only showing one of the two materials. These results demonstrate that KES CT at a compact synchrotron source can become an important tool in pre-clinical research.

scholarly journals Suzaku observation of Jupiter’s X-rays around solar maximum

2019 ◽  
Vol 71 (5) ◽  
Author(s):  
Masaki Numazawa ◽  
Yuichiro Ezoe ◽  
Kumi Ishikawa ◽  
Takaya Ohashi ◽  
Yoshizumi Miyoshi ◽  
...  
Keyword(s):  
Solar Activity ◽  
Compton Scattering ◽  
High Energy ◽  
Spectral Studies ◽  
Relativistic Electrons ◽  
X Rays ◽  
Diffuse Emission ◽  
X Ray ◽  
Inverse Compton Scattering ◽  
Inverse Compton

Abstract We report on results of imaging and spectral studies of X-ray emission from Jupiter observed by Suzaku. In 2006, Suzaku found diffuse X-ray emission in 1–5 keV associated with Jovian inner radiation belts. It has been suggested that the emission is caused by the inverse-Compton scattering by ultra-relativistic electrons (∼50 MeV) in Jupiter’s magnetosphere. To confirm the existence of this emission and to understand its relation to the solar activity, we conducted an additional Suzaku observation in 2014 around the maximum of the 24th solar cycle. As a result, we successfully found the diffuse emission around Jupiter in 1–5 keV again, and also found point-like emission in 0.4–1 keV. The luminosity of the point-like emission, which was probably composed of solar X-ray scattering, charge exchange, or auroral bremsstrahlung emission, increased by a factor of ∼5 with respect to the findings from 2006, most likely due to an increase of the solar activity. The diffuse emission spectrum in the 1–5 keV band was well-fitted with a flat power-law function (Γ = 1.4 ± 0.1) as in the past observation, which supported the inverse-Compton scattering hypothesis. However, its spatial distribution changed from ∼12 × 4 Jovian radius (Rj) to ∼20 × 7 Rj. The luminosity of the diffuse emission increased by the smaller factor of ∼3. This indicates that the diffuse emission is not simply responding to the solar activity, which is also known to cause little effect on the distribution of high-energy electrons around Jupiter. Further sensitive study of the spatial and spectral distributions of the diffuse hard X-ray emission is important to understand how high-energy particles are accelerated in Jupiter’s magnetosphere.

scholarly journals STATUS OF THE POLARIZED NONLINEAR INVERSE COMPTON SCATTERING EXPERIMENT AT UCLA

2007 ◽  
Vol 22 (23) ◽  
pp. 4355-4362
Author(s):  
O. WILLIAMS ◽  
A. DOYURAN ◽  
R. J. ENGLAND ◽  
J. LIM ◽  
J. B. ROSENZWEIG ◽  
...  
Keyword(s):  
Compton Scattering ◽  
Linear Collider ◽  
Laser System ◽  
X Rays ◽  
High Brightness ◽  
Inverse Compton Scattering ◽  
Scattering Experiment ◽  
Inverse Compton ◽  
Set Up ◽  
Future Linear Collider

An Inverse Compton Scattering (ICS) experiment investigating the polarized harmonic production in the nonlinear regime has begun which will utilize the existing terawatt CO 2 laser system and 15 MeV photoinjector in the Neptune Laboratory at UCLA. A major motivation for a source of high brightness polarized x-rays is the production of polarized positrons for use in future linear collider experiments. Analytical calculations have been performed to predict the angular and frequency spectrums for various polarizations and different scattering angles. We report on the experimental set-up and status.

Sign in / Sign up

Export Citation Format

Share Document