HD DVD-R Disc Produced in the Current DVD-R Mass-Production Line with Excellent Read Stability Low-to-High Polarity Organic Dye

2005 ◽  
Author(s):  
Seiji Morita
Keyword(s):  
Mass Production ◽  
Production Line ◽  
Organic Dye ◽  
High Polarity

System framework of adopting additive manufacturing in mass production line

2021 ◽  
pp. 1-24
Author(s):  
Zhuming Bi ◽  
Guoping Wang ◽  
Joel Thompson ◽  
David Ruiz ◽  
John Rosswurm ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
Mass Production ◽  
Production Line ◽  
System Framework

HD DVD-R Disc With Organic Dye Having Low to High Polarity Recording

2005 ◽  
Author(s):  
Koji Takazawa ◽  
Naoki Morishita ◽  
Yasuaki Ootera ◽  
Kazuyo Umezawa ◽  
Naomasa Nakamura ◽  
...  
Keyword(s):  
Organic Dye ◽  
High Polarity

scholarly journals Phytotoxity of waste waters with Cr and

2022 ◽  
Vol 7 (1) ◽  
pp. 51-56
Author(s):  
Agáta Fargašová ◽  
Katarína Szárazová
Keyword(s):  
Metal Concentration ◽  
Mass Production ◽  
Production Line ◽  
Laboratory Experiments ◽  
Dry Mass ◽  
Fresh Mass ◽  
Waste Waters ◽  
Fresh Biomass ◽  
Whole Plant ◽  
Cr Uptake

The dry and fresh biomass and metal concentration (Cr, Ni) in roots and shoots of mustard (S. alba L.) seedlings was evaluated in laboratory experiments with three types of washing waste-waters from cutlery production line. All tested washing waters reduced root dry mass, where-as the dry mass of shoots was either not affected or it increased. The effect of tested washing waters was stronger on fresh mass production than on dry mass production. This indicates problems in water reception and translocation. While the accumulation of Cr was higher in the roots, Ni was distributed equally through the whole plant seedling. Cr uptake in the roots and shoots was in average about 1.7 and 7.3 times, respectively, lower than that of Ni. Ni percentage uptake from washing waters in the roots and shoots was nearly equal and range from 10.2 to 15.8%.

High Temperature Ion Implantation and Activation Annealing Technologies for Mass Production of SiC Power Devices

2012 ◽  
Vol 717-720 ◽  
pp. 821-824 ◽  
Author(s):  
Kazuo Tezuka ◽  
Tatsurou Tsuyuki ◽  
Saburou Shimizu ◽  
Shinichi Nakamata ◽  
Takashi Tsuji ◽  
...  
Keyword(s):  
High Temperature ◽  
Ion Implantation ◽  
Mass Production ◽  
Production Line ◽  
Power Device ◽  
Power Devices ◽  
Key Technologies ◽  
Process Line ◽  
Activation Annealing

In this paper, we demonstrate the fabrication of SBD utilizing SiC process line specially designed for mass production of SiC power device. In SiC power device process, ion implantation and activation annealing are key technologies. Details of ion implantation system and activation annealing system designed for SiC power device production are shown. Further, device characteristics of SBD fabricated using this production line is also shown briefly.

scholarly journals Measurements of GDL Properties for Quality Control in Fuel Cell Mass Production Line

2016 ◽  
Vol 8 (2) ◽  
pp. 422-430 ◽  
Author(s):  
Xiao-Zi Yuan ◽  
Hui Li ◽  
Elton Gu ◽  
Weimin Qian ◽  
Francois Girard ◽  
...  
Keyword(s):  
Quality Control ◽  
Fuel Cell ◽  
Mass Production ◽  
Production Line ◽  
Cell Mass

Minimizing Contamination in Commercial Mass Production of Metal Injection Molded Pure Titanium

2011 ◽  
Vol 133 (5) ◽  
Author(s):  
P. Chalermkarnnon ◽  
A. Manonukul ◽  
N. Muenya ◽  
H. Nakayama ◽  
M. Fujiwara
Keyword(s):  
Mass Production ◽  
Production Line ◽  
Pure Titanium ◽  
Liquid Phase Sintering ◽  
Metal Injection Molding ◽  
Solid Solution Phase ◽  
Production Lines ◽  
Reactive Metal ◽  
Production Scale ◽  
Injection Molded

Metal injection molding (MIM) has been used in manufacturing highly complex metal parts but has had far less application for titanium which is a reactive metal. The implementation of titanium MIM on a mass production scale still raises many difficulties due to the contamination from processes, especially in case of manufacturing titanium parts on existing steel-based part production lines. The effects of material contamination in commercially-pure (CP) titanium parts have been studied and the trial production of titanium parts on a commercial MIM production line has been carried out. Steel-based feedstocks gathering on titanium green parts diffused into the titanium giving rise to liquid phase sintering, which disfigured the appearance of the titanium products. The trial production of titanium parts on a steel-based mass production line resulted in products with poor mechanical properties compared with those produced under laboratory conditions. The contamination by steel during the process resulted in the formation of a Ti–Fe solid solution phase at localized areas in the parts, decreasing the elongation to below 4%. Methods to reduce contamination in the mass production line have been carefully applied and acceptable properties, e.g., elongation about 18%, of titanium parts successfully achieved. CP titanium parts can be manufactured via well-controlled production in the steel-based MIM factory.

Sign in / Sign up

Export Citation Format

Share Document