Materials with complex rheology and viscoelasticity may require special equipment for processing, such as for dispergation. Rheological and mechanical data of the material can help with finding the required equipment or designing equipment. For highly viscous and complex material, a rotor-stator mixer can be a good choice for dispergation. Due to the laminar or creeping mechanism of flow inside the equipment, the dispergation mechanism is assumed to be a combination of the shear stress and slicing of the material by the rotor and stator blades. For the validation of the theory, the mechanical properties of the viscose identified in a previous work were used for comparison with the data from the CFD simulation of the rotor-stator mixer. The comparison showed that the rotor-stator device can overcome the complex shear modulus and ultimate strength of the material and homogenize the solution through a combination of the shear stress and slicing. The theory was also confirmed on the process line proposed for homogenization of the specific material. The stability of viscosity during the process of homogenization was measured and used as the main parameter for quality assessment.