scholarly journals Refractive index sensing with optical bound states in the continuum

2020 ◽  
Vol 28 (26) ◽  
pp. 38907
Author(s):  
Dmitrii N. Maksimov ◽  
Valeriy S. Gerasimov ◽  
Silvia Romano ◽  
Sergey P. Polyutov
ACS Nano ◽  
2020 ◽  
Vol 14 (11) ◽  
pp. 15417-15427 ◽  
Author(s):  
Silvia Romano ◽  
Maria Mangini ◽  
Erika Penzo ◽  
Stefano Cabrini ◽  
Anna Chiara De Luca ◽  
...  

Nanophotonics ◽  
2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Emilia Pruszyńska-Karbownik ◽  
Mikołaj Janczak ◽  
Tomasz Czyszanowski

Abstract Bound states in the continuum (BICs) are observed in optical cavities composed of a high refractive index periodic structure embedded in significantly lower refractive index surroundings, enabling vertical confinement of the grating modes. Here, we propose a vertically nonsymmetric configuration, implemented on a high refractive index bulk substrate with a one-dimensional grating positioned on a distributed Bragg reflector (DBR). In this configuration, the grating modes are leaky, which could prohibit the creation of a BIC if the grating was implemented on uniform substrate. However, the judiciously designed DBR on which the grating is implemented reflects nonzero diffraction orders induced by the grating. We found that the laterally antisymmetric optical modes located at the center of the Brillouin zone of this structure create BICs that are robust against changes in the grating parameters, as long as the DBR reflects the diffraction orders. The configuration enables a high degree of design freedom, facilitating the realization of very high quality factor cavities in conventional all-semiconductor technology.


Author(s):  
Qi Wang ◽  
Ju-Xin Jiang ◽  
Lei Wang ◽  
Xiang-Yu Yin ◽  
Xin Yan ◽  
...  

Abstract A subwavelength asymmetric grating refractive index (RI) sensor based on quasi-bound states in the continuum (q-BIC) with temperature self-compensation was proposed. The sensor structure consisted of a Prism / Asymmetric grating / Analytes, where the grating layers were periodically arranged asymmetric silicon (Si) and polydimethylsiloxane (PDMS). The asymmetry of the structure led to the fact that the tangential field component and the radiative field component in the grating layer were no longer in a fully decoupled state at the resonance position, creating two extremely narrow q-BIC resonance peaks, which gave the sensor a high Figure of Merit (FOM) and a low detection limit (DL). In addition, the thermo-optical coefficient of the materials made one of the resonance peaks more sensitive to temperature changes, realizing the temperature self-compensation of RI detection and thus improving the detection accuracy. From the results, reducing the asymmetry of the structure by modifying the parameters could theoretically make FOM > 5.1*106 RIU-1 and DL < 9.8*10-9 RIU. For the RI sensor with temperature self-compensation, FOM = 3057.85 RIU-1 and DL = 1.64*10-5 RIU for the RI, FOM = 0.88 °C-1 and DL = 0.057 °C for the temperature. These findings could effectively improve the temperature interference resistance of the sensor and thus the accuracy of trace substance detection.


2020 ◽  
Vol 9 (1) ◽  
Author(s):  
Zejie Yu ◽  
Xiankai Sun

AbstractPhotonic bound states in the continuum (BICs) have recently been studied in various systems and have found wide applications in sensors, lasers, and filters. Applying BICs in photonic integrated circuits enables low-loss light guidance and routing in low-refractive-index waveguides on high-refractive-index substrates, which opens a new avenue for integrated photonics with functional single-crystal materials. Here, we demonstrate high-quality integrated lithium niobate microcavities inside which the photonic BIC modes circulate and further modulate these BIC modes acousto-optically by using piezoelectrically actuated surface acoustic waves at microwave frequencies. With a high acousto-optic modulation frequency, the acousto-optic coupling is well situated in the resolved-sideband regime. This leads to coherent coupling between microwave and optical photons, which is exhibited by the observed electro-acousto-optically induced transparency and absorption. Therefore, our devices serve as a paradigm for manipulating and controlling photonic BICs on a chip, which will enable many other applications of photonic BICs in the areas of microwave photonics and quantum information processing.


2017 ◽  
Vol 96 (1) ◽  
Author(s):  
LiangSheng Li ◽  
Jing Zhang ◽  
Chong Wang ◽  
Ning Zheng ◽  
Hongcheng Yin

Sign in / Sign up

Export Citation Format

Share Document