Extended bound states in the continuum in a one-dimensional grating implemented on a distributed Bragg reflector

Abstract Bound states in the continuum (BICs) are observed in optical cavities composed of a high refractive index periodic structure embedded in significantly lower refractive index surroundings, enabling vertical confinement of the grating modes. Here, we propose a vertically nonsymmetric configuration, implemented on a high refractive index bulk substrate with a one-dimensional grating positioned on a distributed Bragg reflector (DBR). In this configuration, the grating modes are leaky, which could prohibit the creation of a BIC if the grating was implemented on uniform substrate. However, the judiciously designed DBR on which the grating is implemented reflects nonzero diffraction orders induced by the grating. We found that the laterally antisymmetric optical modes located at the center of the Brillouin zone of this structure create BICs that are robust against changes in the grating parameters, as long as the DBR reflects the diffraction orders. The configuration enables a high degree of design freedom, facilitating the realization of very high quality factor cavities in conventional all-semiconductor technology.

Download Full-text

Acousto-optic modulation of photonic bound state in the continuum

Light Science & Applications ◽

10.1038/s41377-019-0231-1 ◽

2020 ◽

Vol 9 (1) ◽

Cited By ~ 42

Author(s):

Zejie Yu ◽

Xiankai Sun

Keyword(s):

Refractive Index ◽

Integrated Circuits ◽

Acoustic Waves ◽

Bound States ◽

Quantum Information Processing ◽

Modulation Frequency ◽

Surface Acoustic Waves ◽

High Refractive Index ◽

Bound State ◽

The Continuum

AbstractPhotonic bound states in the continuum (BICs) have recently been studied in various systems and have found wide applications in sensors, lasers, and filters. Applying BICs in photonic integrated circuits enables low-loss light guidance and routing in low-refractive-index waveguides on high-refractive-index substrates, which opens a new avenue for integrated photonics with functional single-crystal materials. Here, we demonstrate high-quality integrated lithium niobate microcavities inside which the photonic BIC modes circulate and further modulate these BIC modes acousto-optically by using piezoelectrically actuated surface acoustic waves at microwave frequencies. With a high acousto-optic modulation frequency, the acousto-optic coupling is well situated in the resolved-sideband regime. This leads to coherent coupling between microwave and optical photons, which is exhibited by the observed electro-acousto-optically induced transparency and absorption. Therefore, our devices serve as a paradigm for manipulating and controlling photonic BICs on a chip, which will enable many other applications of photonic BICs in the areas of microwave photonics and quantum information processing.

Download Full-text

Conductive Distributed Bragg Reflector Fabricated at Low Temperature

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.421.364 ◽

2013 ◽

Vol 421 ◽

pp. 364-368

Author(s):

Ann Kuo Chu ◽

Wei Chen Tien

Keyword(s):

Refractive Index ◽

Indium Tin Oxide ◽

Rf Sputtering ◽

High Refractive Index ◽

Bragg Reflector ◽

Distributed Bragg Reflector ◽

Small Deviations ◽

Ito Film ◽

Ito Thin Films ◽

Index Contrast

A conductive DBR electrode fabricated using the single Indium tin oxide (ITO) conductive material is proposed. The high refractive index of the dense ITO film was achieved by RF sputtering at room temperature and the porous ITO film with low refractive index was prepared by applying supercritical CO2(SCCO2) treatment at 60 °C on gel-coated ITO thin films. The index contrast of the ITO bilayers was higher than 0.5 at a wavelength of 550 nm. In addition, small deviations on the optical thickness of the ITO bilayers were observed during the DBR stacking processes. For the DBR comprising 4 periods ITO bilayers, the reflectance and sheet resistance of 72.8% and 35 Ω/ were achieved.

Download Full-text

Near-Field Excitation of Bound States in the Continuum in All-Dielectric Metasurfaces through a Coupled Electric/Magnetic Dipole Model

Nanomaterials ◽

10.3390/nano11040998 ◽

2021 ◽

Vol 11 (4) ◽

pp. 998

Author(s):

Diego R. Abujetas ◽

José A. Sánchez-Gil

Keyword(s):

Magnetic Dipole ◽

Density Of States ◽

Bound States ◽

Local Density ◽

Near Field ◽

Field Pattern ◽

Local Density Of States ◽

Optical Modes ◽

Source Excitation ◽

The Continuum

Resonant optical modes arising in all-dielectric metasurfaces have attracted much attention in recent years, especially when so-called bound states in the continuum (BICs) with diverging lifetimes are supported. With the aim of studying theoretically the emergence of BICs, we extend a coupled electric and magnetic dipole analytical formulation to deal with the proper metasurface Green function for the infinite lattice. Thereby, we show how to excite metasurface BICs, being able to address their near-field pattern through point-source excitation and their local density of states. We apply this formulation to fully characterize symmetry-protected BICs arising in all-dielectric metasurfaces made of Si nanospheres, revealing their near-field pattern and local density of states, and, thus, the mechanisms precluding their radiation into the continuum. This formulation provides, in turn, an insightful and fast tool to characterize BICs (and any other leaky/guided mode) near fields in all-dielectric (and also plasmonic) metasurfaces, which might be especially useful for the design of planar nanophotonic devices based on such resonant modes.

Download Full-text

Raman scattering in high-refractive-index nanostructures

Nanophotonics ◽

10.1515/nanoph-2020-0539 ◽

2020 ◽

Vol 0 (0) ◽

Author(s):

Søren Raza ◽

Anders Kristensen

Keyword(s):

Raman Spectroscopy ◽

Refractive Index ◽

Raman Scattering ◽

Bound States ◽

Stimulated Raman Scattering ◽

Dielectric Materials ◽

High Refractive Index ◽

Surface Enhanced Raman Spectroscopy ◽

Raman Enhancement ◽

The Impact

AbstractThe advent of resonant dielectric nanomaterials has provided a new path for concentrating and manipulating light on the nanoscale. Such high-refractive-index materials support a diverse set of low-loss optical resonances, including Mie resonances, anapole states, and bound states in the continuum. Through these resonances, high-refractive-index materials can be used to engineer the optical near field, both inside and outside the nanostructures, which opens up new opportunities for Raman spectroscopy. In this review, we discuss the impact of high-refractive-index nano-optics on Raman spectroscopy. In particular, we consider the intrinsic Raman enhancement produced by different dielectric resonances and their theoretical description. Using the optical reciprocity theorem, we derive an expression which links the Raman enhancement to the enhancement of the stored electric energy. We also address recent results on surface-enhanced Raman spectroscopy based on high-refractive-index dielectric materials along with applications in stimulated Raman scattering and nanothermometry. Finally, we discuss the potential of Raman spectroscopy as a tool for detecting the optical near-fields produced by dielectric resonances, complementing reflection and transmission measurements.

Download Full-text