scholarly journals Super-wideband perfect solar light absorbers using titanium and silicon dioxide thin-film cascade optical nanocavities

2016 ◽  
Vol 6 (12) ◽  
pp. 3804 ◽  
Author(s):  
Jinnan Chen ◽  
Junpeng Guo ◽  
Liang-Yao Chen
Author(s):  
Geon Seok Lee ◽  
Merreta Noorenza Biutty ◽  
Maulida Zakia ◽  
Seong Il Yoo
Keyword(s):  

2022 ◽  
Vol 124 ◽  
pp. 111967
Author(s):  
Mohd Fadhil Majnis ◽  
Ong Chia Yee ◽  
Mohd Azam Mohd Adnan ◽  
Mohd Rashid Yusof Hamid ◽  
Ku Zilati Ku Shaari ◽  
...  

2018 ◽  
Vol 13 ◽  
pp. 117739011876336 ◽  
Author(s):  
Eman Alzahrani

Fast Green (FCF) dye is commonly used in both cytology and histology applications. Previous studies have found that it can cause mutagenic and tumorigenic effects in experimental human and animal populations. It can also be a source of skin, eye, respiratory, and digestive irritation. The purpose of this study was to examine the use of thin film membranes to degrade FCF. A thin film membrane of chitosan (CS) was fabricated and subsequently filled with zinc oxide nanoparticles (ZnO) or ZnO/CuO-heterostructured nanocomposites. The CS membrane was used as a matrix, and the nanomaterials were used as photocatalysts. The prepared membranes were characterised by four analytical techniques: atomic force microscopy, scanning electron microscopy, X-ray diffraction, and energy-dispersive X-ray analyses. The photocatalytic activity of the fabricated membranes was evaluated by performing experiments in which aqueous solutions of FCF dye that contained the fabricated membrane were irradiated with solar light or UV light. The photodegradation percentage was spectrophotometrically determined by monitoring the maximum wavelengths (λmax) of FCF at 623 nm for different irradiation times. The decolourisation percentages of the dye under solar light were 57.90% and 60.23% using the CS-ZnO and CS-ZnO/CuO membranes, respectively. When UV light irradiation was employed as the source of irradiation, the photodegradation percentages of FCF were 71.45% and 91.21% using the CS-ZnO and CS-ZnO/CuO membranes, respectively. These results indicated that the best photocatalytic system for the degradation of FCF dye was CS-ZnO/CuO membrane in combination with UV light irradiation. The study also found that it was easy to separate the prepared membranes after the reaction without the need for a centrifuge or magnet. The results demonstrate the potential for CS-ZnO and CS-ZnO/CuO membranes for use as effective sorbents during the process of photodegradation of harmful dyes within waste water recycling practices.


2011 ◽  
Vol 2011 ◽  
pp. 1-10 ◽  
Author(s):  
Hongxia Wang

The research in thin film solar cells has been dominated by light absorber materials based on CdTe and Cu(In,Ga)Se2(CIGS) in the last several decades. The concerns of environment impact of cadmium and the limited availability of indium in those materials have driven the research towards developing new substitute light absorbers made from earth abundant, environment benign materials. Cu2ZnSnS4(CZTS) semiconductor material has emerged as one of the most promising candidates for this aim and has attracted considerable interest recently. Significant progress in this relatively new research area has been achieved in the last three years. Over 130 papers on CZTS have been published since 2007, and the majority of them are on the preparation of CZTS thin films by different methods. This paper, will review the wide range of techniques that have been used to deposit CZTS semiconductor thin films. The performance of the thin film solar cells using the CZTS material will also be discussed.


RSC Advances ◽  
2016 ◽  
Vol 6 (8) ◽  
pp. 6562-6570 ◽  
Author(s):  
Fang Qin Zeng ◽  
Yan Qing Lai ◽  
Zi Li Han ◽  
Boon K. Ng ◽  
Zhi An Zhang ◽  
...  

A CZTSSe thin film solar cell was fabricated by a sol–gel method with an efficiency of 8.08%.


Sign in / Sign up

Export Citation Format

Share Document