Lifetime Measurements of Several S, P, and D States of Thallium in a Glow Discharge by Single-Step and Two-Step Laser-Excited Fluorescence

2008 ◽  
Vol 62 (1) ◽  
pp. 78-85 ◽  
Author(s):  
N. Taylor ◽  
N. Omenetto ◽  
B. W. Smith ◽  
J. D. Winefordner

The lifetimes of several states in a thallium see-through hollow cathode discharge, or galvatron, are obtained to characterize its potential as an atomic line filter. The lifetimes of the thallium 6 2D3/2, 6 2D5/2, and 7 2S1/2 states are measured by time-resolved single-step laser-excited fluorescence by use of a 276.787 nm laser pulse or a 535.046 nm laser pulse and measuring the resulting fluorescence waveform at the appropriate wavelength. Values of 6.4 ± 0.1, 7.5 ± 1.1, and 7.7 ± 0.2 ns were obtained for the 6 2D3/2, 6 2D5/2, and 7 2S1/2 states, respectively, which agree with values obtained by previous authors, as well as calculated values. No current dependence was observed for each of these states. The lifetime of the long-lived thallium 6 2P3/2° metastable state was measured by two-step laser-excited fluorescence at various applied currents. The metastable level was pumped by a 276.787 nm laser pulse, and a temporally delayed 535.046 nm laser pulse interrogated the population of the metastable state. Relating the fluorescence intensity to the population of the metastable state as a function of delay time yielded a decay curve for the 6 2P3/2° metastable state. Values of 2.1 ± 0.2, 2.8 ± 0.1, 3.1 ± 0.3, 3.8 ± 0.4, and 4.8 ± 0.6 μs were found for applied currents of 14.0, 12.0, 10.0, 8.0, and 6.0 mA, respectively. The resulting lifetimes for the 6 2P3/2° metastable state clearly show a dependence on the applied current and are expected to be due to collisions with the wall of the cathode, as well as a contribution due to collisions with electrons.

2009 ◽  
Vol 18 (02) ◽  
pp. 323-334 ◽  
Author(s):  
YURI A. LITVINOV

Mass and lifetime measurements of stored exotic nuclei is one of the successful experimental programs at the FRS-ESR facility of GSI, Darmstadt. Two experimental techniques, namely Isochronous and time-resolved Schottky mass spectrometry have been developed. Nuclides in a very broad range of half-lives starting from stable down to only a few ten microseconds can be addressed. Single stored ions can be measured which makes these techniques highly efficient. More than 1100 atomic masses have been measured meanwhile. Half-life measurements are performed with bare and few-electron ions. Decay properties of such highly-charged ions can be dramatically different from the ones known in neutral atoms. Single-particle decay spectroscopy has been developed for investigations of two-body beta decays. A brief description of the experimental methods and recent results will be presented. Future experiments at the present facility and the perspectives with the new NuSTAR/ILIMA project at FAIR will be outlined.


1981 ◽  
Vol 37 (a1) ◽  
pp. C306-C306
Author(s):  
D. Pruss ◽  
G. Huber ◽  
H. G. Danielmeyer ◽  
H. D. Bartunik

ACS Nano ◽  
2010 ◽  
Vol 4 (2) ◽  
pp. 978-984 ◽  
Author(s):  
Cheng Sun ◽  
Kai-Hung Su ◽  
Jason Valentine ◽  
Yazmin T. Rosa-Bauza ◽  
Jonathan A. Ellman ◽  
...  

2010 ◽  
Vol 43 (22) ◽  
pp. 225001 ◽  
Author(s):  
Yanyan Feng ◽  
Wei Zhang ◽  
Lele Ning ◽  
Bo Kuang ◽  
Guijuan Sun ◽  
...  

Metals ◽  
2020 ◽  
Vol 10 (2) ◽  
pp. 168 ◽  
Author(s):  
David Munoz-Martin ◽  
Yu Chen ◽  
Miguel Morales ◽  
Carlos Molpeceres

Laser-induced forward transfer (LIFT) technique has been used for printing a high viscosity (250 Pa·s) commercial silver paste with micron-size particles (1–4 µm). Volumetric pixels (voxels) transferred using single ps laser pulses are overlapped in order to obtain continuous metallic lines. However, interference problems between successive voxels is a major issue that must be solved before obtaining lines with good morphologies. The effects of the laser pulse energy, thickness of the donor paste film, and distance between successive voxels on the morphology of single voxels and lines are discussed. Due to the high viscosity of the paste, the void in the donor film after a printing event remains, and it negatively affects the physical transfer mechanism of the next laser pulses. When two laser pulses are fired at a short distance, there is no transfer at all. Only when the pulses are separated by a distance long enough to avoid interference but short enough to allow overlapping (≈100 µm), is it possible to print continuous lines in a single step. Finally, the knowledge obtained has allowed the printing of silver lines at high speeds (up to 60 m/s).


2019 ◽  
Vol 96 (5) ◽  
pp. 1046-1050 ◽  
Author(s):  
Steven M. Drew ◽  
Deborah S. Gross ◽  
William E. Hollingsworth ◽  
Thomas Baraniak ◽  
Christopher M. Zall ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document