Effect of Graphene Addition on Polycaprolactone Scaffolds Fabricated Using Melt-Electrowriting

Melt-electrowriting (MEW) is an emerging method that combines electrospinning and extrusion printing, allowing the fabrication of micron-scale structures suitable for tissue engineering. Compared to other additive fabrication methods, melt-electro written structures can offer more appropriate substrates for cell culture due to filament size and mechanical characteristics of the fabricated scaffolds. In this study, polycaprolactone (PCL)/graphene composites were investigated for fabrication of micron-size scaffolds through MEW. It was demonstrated that the addition of graphene can considerably improve the processability of PCL to fabricate micron-scale scaffolds with enhanced resolution. The tensile strength of the scaffold prepared from PCL/graphene composite (with only 0.5 wt.% graphene) was proved significantly (by more than 270%), better than that of the pristine PCL scaffold. Furthermore, graphene was demonstrated to be a suitable material for tailoring the degradation process to avoid undesirable bulk degradation, rapid mass loss and damage to the internal matrix of the polymer. The findings of this study offer a promising route for the fabrication of high-resolution scaffolds with micron-scale resolution for tissue engineering.

Composition and Efficacy of Essential Oil Nanoemulsions

Essential oil, endorsed as a natural cum powerful ingredient, encompasses incredible properties, and various approaches have been proposed and spurred over the last decades. One among them is the nano-emulsification of the essential oils, and the sub-micron size provides prolonged shelf life, ease of formulation and handling, nullification of the stated obstacles, as well as the augmentation of the essential oil antimicrobial activity. This chapter primarily reinforces and is well-articulated on (1) the components and its precise concentration adequate to fabricate nanoemulsion; (2) critical analysis on the experimentally inferred antimicrobial mechanism and the extent of contribution granted by the optimal concentration of the components in the nanoemulsion; (3) scrutinization of the possible impact rendered by the components on the other characteristics of nanoemulsion aside from antimicrobial potency. Altogether, the importance of careful formulation of the essential oil-loaded nanoemulsion is emphasized extensively.

Fluorogenic hyaluronan nanogels for detection of micro- and nanoplastics in water

Environmental pollution from plastics is exponentially increasing due to human activities. While larger microplastics can be detected with various methods, retrieving micron-size fragments and nanoplastics remains challenging. Yet, these smaller-sized...

Melatonin, tunneling nanotubes and anastasis: Cheating cell death

When healthy neurons are exposed to toxins or physiological insults such as ischemia, apoptosis is often initiated. Once underway, this mechanistically-well described process was thought to routinely run its course with the disintegration of the cell and phagocytosis of the debris. Within the last decade, the consistency of this process has been questioned. It is now known that some damaged cells can recover, i.e., they avoid death; this restoration process is referred to as anastasis. The reestablishment of a healthy cell phenotype is highly energy-requiring, so optimally functioning mitochondria are obviously beneficial during the regenerative process. Some healthy mitochondria that end up in regenerating cells are transferred there by adjacent healthier cells through tunneling nanotubes. Tunneling nanotubes generally form under stressful conditions when these micron-size tubules link adjacent cells. These tubules transfer soluble factors and organelles, including mitochondria, between the connected cells. When damaged cells receive high APT-producing mitochondria via this means, they support the ability of the cells to recover. Two recent comprehensive publications show that melatonin aids the transfer of mitochondria through nanotubes that connect neurons thereby likely assisting the recovery of the damaged recipient cell. Thus, melatonin not only protects normal neurons from damage by neutralizing the agents that initiate apoptosis, e.g., free radicals, etc., but also reverses this process once it is underway.

Multiferroic Coupling of Ferromagnetic and Ferroelectric Particles through Elastic Polymers

Multiferroics are materials that electrically polarize when subjected to a magnetic field and magnetize under the action of an electric field. In composites, the multiferroic effect is achieved by mixing of ferromagnetic (FM) and ferroelectric (FE) particles. The FM particles are prone to magnetostriction (field-induced deformation), whereas the FE particles display piezoelectricity (electrically polarize under mechanical stress). In solid composites, where the FM and FE grains are in tight contact, the combination of these effects directly leads to multiferroic behavior. In the present work, we considered the FM/FE composites with soft polymer bases, where the particles of alternative kinds are remote from one another. In these systems, the multiferroic coupling is different and more complicated in comparison with the solid ones as it is essentially mediated by an electromagnetically neutral matrix. When either of the fields, magnetic or electric, acts on the ‘akin’ particles (FM or FE) it causes their displacement and by that perturbs the particle elastic environments. The induced mechanical stresses spread over the matrix and inevitably affect the particles of an alternative kind. Therefore, magnetization causes an electric response (due to the piezoeffect in FE) whereas electric polarization might entail a magnetic response (due to the magnetostriction effect in FM). A numerical model accounting for the multiferroic behavior of a polymer composite of the above-described type is proposed and confirmed experimentally on a polymer-based dispersion of iron and lead zirconate micron-size particles.

The Discovery of the Buffer Capacity of Various Types of Polyelectrolyte Microcapsules

Polyelectrolyte microcapsules, which are obtained by the method of alternate adsorption of oppositely charged polyelectrolytes onto colloidal particles of micron size, are widely used in science and industry. Nevertheless, the properties of microcapsules are still poorly understood. In particular, there is no information in the literature on the buffer capacity. However, information on the presence of a buffer capacity and an understanding of its mechanisms can both simplify the use of microcapsules and expand the scope of their application. In this regard, the buffer capacity of various types of microcapsules was studied. It was found that polyelectrolyte microcapsules consisting of polyallylamine, and polystyrene sulfonate have a buffer capacity. In addition, in an acidic medium, the buffer capacity of microcapsules containing BSA is significantly greater than that of microcapsules without protein. This is due to the fact that BSA contributes to the buffering of microcapsules. Differences in the behaviour of the buffer capacity of microcapsules with the composition (PAH/PSS)3 and (PSS/PAH)3 were found. In addition, a hypothesis has been proposed that regions of unbound polyallylamine are responsible for the buffering properties of polyelectrolyte microcapsules. This hypothesis is confirmed by the fact that incubation of microcapsules in 0.5 M NaCl increases the amount of unbound polyallylamine, which leads to an increase in the buffer capacity of microcapsules at alkaline pH values higher than the buffer capacity of capsules in an aqueous solution.

Runaway of electrons and initiation of explosive electron emission during pulse breakdown of high-pressure gases

We propose a scenario of the initiation of explosive electron emission on the boundary of the electrode and a high-pressure gas. According to this scenario, positive ions are formed due to the gas ionization by field-emission electrons and accumulated in the vicinity of protrusions of micron size at the cathode. The distance between the ion cloud and the emitting surface decreases with increasing pressure which results in a growth of the local field. As a consequence, an explosive growth of the emission current density occurs for a dense gas (the gas with the pressure of tens of atm). As a result, explosive-emission centers can be formed in dozens of ps. These centers give a start to plasma channels expanding towards the anode. Runaway electron flow generated near the channel heads ionizes the gas gap, causing its subnanosecond breakdown.