scholarly journals Structural, Electronic, Molecular Orbital Analysis and Charge Distributions on Nitrate Salt of Guanidine through DFT and TD-DFT Methods

2021 ◽  
Vol 33 (8) ◽  
pp. 1905-1910
Author(s):  
S. Thangarasu ◽  
V. Siva ◽  
A. Shameem ◽  
A. Murugan ◽  
S. Athimoolam ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Ion Pairs ◽  
Frontier Molecular Orbital ◽  
Mulliken Charge ◽  
Functional Theory ◽  
Td Dft ◽  
Guanidinium Nitrate

Guanidinium nitrate, a non-linear optical material has been systematically studied through quantum chemical (density functional theory and Hartree Fock) methods. Studies on Mulliken charge, Frontier molecular orbitals (FMOs) and hyperpolarizability analyses have been performed. The Mulliken population analyses were carried out for the optimized molecular geometry by HF and B3LYP methods with 6-311++G(d,p) levels. The molecular orbital parameters of guanidinium nitrate have been calculated by FMO analysis. Frontier molecular orbital (FMO) analysis indicates the electron delocalization on the guanidinium nitrate and also its low value of energy gap indicates electron transfer. Optical property has been investigated by time-dependent density functional theory (TD-DFT) calculation. The second-order hyperpolarizability value of the ion pairs is much greater than urea, which confirms the good NLO nature of guanidinium nitrate.

scholarly journals DFT and TD-DFT Study of Only First Diaminomalenonitrile Based Molecular Receptor for Fluoride Anion: Correlation of Calculated and Experimental Results

2021 ◽  
Vol 13 (3) ◽  
pp. 923-933
Author(s):  
M. A. Kaloo ◽  
H. Bashir ◽  
M. A. Rather ◽  
S. A. Majid ◽  
B. A. Bhat
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Energy Gap ◽  
Atomic Orbital ◽  
Basis Set ◽  
Frontier Molecular Orbital ◽  
Fluoride Anion ◽  
Functional Theory ◽  
Sensing Mechanism ◽  
Td Dft

In this work, the sensing mechanism of a novel anion receptor, 2-amino-((E)-(4-cyanobenzalidine) amino) maleonitrile reported by Sankar et al. (Analyst 138:4760-4763, 2013) was investigated theoretically with the help of density functional theory (DFT) and time-dependent density functional theory (TD-DFT). From the frontier molecular orbital analysis, it is reasonable to support the proposed charge transfer (ICT) enhancement in the receptor molecule in the presence of F−. A significant reduction in the energy gap (ΔE) from 4.014 eV to 2.342eV between highest occupied and lowest unoccupied energy levels was revealed, leading to the strong redshift of its absorption characteristics. Moreover, 1H NMR was also calculated to further understand the mechanistic insights by using the gauge independent atomic orbital (GIAO) method with B3LYP methods and the 6-311++G (d,p) basis set. The spectra were simulated, and the chemical shifts linked to TMS were compared with experimental. Besides, Intrinsic Reaction Coordinates (IRC) were also calculated to understand the sensing mechanism.

scholarly journals Theoretical Study of a Class of Organic D-π-A Dyes for Polymer Solar Cells: Influence of Various π-Spacers

Crystals ◽  
2020 ◽  
Vol 10 (3) ◽  
pp. 163
Author(s):  
Nguyen Van Trang ◽  
Tran Ngoc Dung ◽  
Ngo Tuan Cuong ◽  
Le Thi Hong Hai ◽  
Daniel Escudero ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Polymer Solar Cells ◽  
Basis Set ◽  
Structure Theory ◽  
Functional Theory ◽  
Alkyl Groups

A class of D-π-A compounds that can be used as dyes for applications in polymer solar cells has theoretically been designed and studied, on the basis of the dyes recently shown by experiment to have the highest power conversion efficiency (PCE), namely the poly[4,8-bis(5-(2-butylhexylthio)thiophen-2-yl)benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl-alt-TZNT] (PBDTS-TZNT) and poly[4,8-bis(4-fluoro-5-(2-butylhexylthio)thiophen-2-yl)benzo[1,2-b:4,5-b’]dithiophene-2,6-diyl-alt-TZNT] (PBDTSF-TZNT) substances. Electronic structure theory computations were carried out with density functional theory and time-dependent density functional theory methods in conjunction with the 6−311G (d, p) basis set. The PBDTS donor and the TZNT (naphtho[1,2-c:5,6-c]bis(2-octyl-[1,2,3]triazole)) acceptor components were established from the original substances upon replacement of long alkyl groups within the thiophene and azole rings with methyl groups. In particular, the effects of several π-spacers were investigated. The calculated results confirmed that dithieno[3,2-b:2′,3′-d] silole (DTS) acts as an excellent π-linker, even better than the thiophene bridge in the original substances in terms of well-known criteria. Indeed, a PBDTS-DTS-TZNT combination forms a D-π-A substance that has a flatter structure, more rigidity in going from the neutral to the cationic form, and a better conjugation than the original compounds. The highest occupied molecular orbital (HOMO)-lowest unoccupied molecular orbital (LUMO) energy gap of such a D-π-A substance becomes smaller and its absorption spectrum is more intense and red-shifted, which enhances the intramolecular charge transfer and makes it a promising candidate to attain higher PCEs.

scholarly journals Towards Rational Designing of Efficient Sensitizers Based on Thiophene and Infrared Dyes for Dye-Sensitized Solar Cells

2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Ahmad Irfan ◽  
Abdullah G. Al-Sehemi ◽  
Shabbir Muhammad
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Dye Sensitized Solar Cells ◽  
Functional Theory ◽  
Dye Sensitized ◽  
Orbital Energies ◽  
Sensitized Solar Cells

Geometries, electronic properties, and absorption spectra of the dyes which are a combination of thiophene based dye (THPD) and IR dyes (covering IR region; TIRBD1-TIRBD3) were performed using density functional theory (DFT) and time dependent density functional theory (TD-DFT), respectively. Different electron donating groups, electron withdrawing groups, and IR dyes have been substituted on THPD to enhance the efficiency. The bond lengths of new designed dyes are almost the same. The lowest unoccupied molecular orbital energies of designed dyes are above the conduction band of TiO2 and the highest occupied molecular orbital energies are below the redox couple revealing that TIRBD1-TIRBD3 would be better sensitizers for dye-sensitized solar cells. The broad spectra and low energy gap also showed that designed materials would be efficient sensitizers.

scholarly journals Molecular engineering of indenoindene-3-ethylrodanine acceptors with A2-A1-D-A1-A2 architecture for promising fullerene-free organic solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Khalid ◽  
Momina ◽  
Muhammad Imran ◽  
Muhammad Fayyaz ur Rehman ◽  
Ataualpa Albert Carmo Braga ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Charge Transfer ◽  
Organic Solar Cells ◽  
Density Functional ◽  
Energy Gap ◽  
Molecular Engineering ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
Acceptor Molecules

AbstractConsidering the increased demand and potential of photovoltaic devices in clean, renewable electrical and hi-tech applications, non-fullerene acceptor (NFA) chromophores have gained significant attention. Herein, six novel NFA molecules IBRD1–IBRD6 have been designed by structural modification of the terminal moieties from experimentally synthesized A2-A1-D-A1-A2 architecture IBR for better integration in organic solar cells (OSCs). To exploit the electronic, photophysical and photovoltaic behavior, density functional theory/time dependent-density functional theory (DFT/TD-DFT) computations were performed at M06/6-311G(d,p) functional. The geometry, electrical and optical properties of the designed acceptor molecules were compared with reported IBR architecture. Interestingly, a reduction in bandgap (2.528–2.126 eV), with a broader absorption spectrum, was studied in IBR derivatives (2.734 eV). Additionally, frontier molecular orbital findings revealed an excellent transfer of charge from donor to terminal acceptors and the central indenoindene-core was considered responsible for the charge transfer. Among all the chromophores, IBRD3 manifested the lowest energy gap (2.126 eV) with higher λmax at 734 and 745 nm in gaseous phase and solvent (chloroform), respectively due to the strong electron-withdrawing effect of five end-capped cyano groups present on the terminal acceptor. The transition density matrix map revealed an excellent charge transfer from donor to terminal acceptors. Further, to investigate the charge transfer and open-circuit voltage (Voc), PBDBT donor polymer was blended with acceptor chromophores, and a significant Voc (0.696–1.854 V) was observed. Intriguingly, all compounds exhibited lower reorganization and binding energy with a higher exciton dissociation in an excited state. This investigation indicates that these designed chromophores can serve as excellent electron acceptor molecules in organic solar cells (OSCs) that make them attractive candidates for the development of scalable and inexpensive optoelectronic devices.

scholarly journals Density Functional Theory Study of CL-20/Nitroimidazoles Energetic Cocrystal Compounds in an External Electric Field

2021 ◽  
Author(s):  
xiaosong Xu ◽  
Renfa Zhang ◽  
Wenxin Xia ◽  
Peng Ma ◽  
Congming Ma ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Electric Field ◽  
Nitro Group ◽  
External Electric Field ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Functional Theory ◽  
Highest Occupied Molecular Orbital ◽  
Lowest Unoccupied Molecular Orbital

Abstract The external electric field has a significant influence on the sensitivity of the energetic cocrystal materials. In order to find out the relationship between the external electric field and sensitivity of energetic cocrystal compounds 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/1,4-dinitroimidazole (CL-20/1,4-DNI), 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/1-methyl-2,4-dinitro-1H-imidazole (CL-20/2,4-MDNI) and 2,4,6,8,10,12-hexanitro-2,4,6,8,10,12-hexaazaisowurtzitane/1-methyl-4,5-dinitro-1H-imidazole (CL-20/4,5-MDNI). In this work, density functional theory (DFT) at B3LYP-D3/6-311+G(d,p) and M062X-D3/ma-def2 TZVPP levels was employed to calculate the bond dissociation energies (BDEs) of selected N-NO2 trigger bonds, frontier molecular orbitals, electrostatic potentials (ESPs) and nitro group charges (QNO2) under different external electric field. The results show that as the positive electric field intensity increases, the highest occupied molecular orbital (HOMO) and the lowest unoccupied molecular orbital (LUMO) energy gap and BDEs become smaller, and the local positive ESPs becomes larger, so that the energetic cocrystals tends to have higher sensitivity. In addition, the linear fitting results show that the trigger bond length and nitro group charge changes are closely related to the external electric field strength.

scholarly journals A Density Functional Theory Study on Paracetamol-Oxalic Acid Co-Crystal

2020 ◽  
pp. 11-18
Author(s):  
Punya Paudel ◽  
Krishna Raj Adhikari ◽  
Kapil Adhikari
Keyword(s):  
Density Functional Theory ◽  
Oxalic Acid ◽  
Molecular Orbital ◽  
Density Functional ◽  
Energy Gap ◽  
Lattice Energy ◽  
Stable Form ◽  
Functional Theory ◽  
Monoclinic Form ◽  
Hydrogen Bonded

Paracetamol (PCA) has two well-known polymorphic forms, monoclinic (form I) and orthorhombic (form II). The parallel packing of flat hydrogen bonded layers in the metastable form II results in compaction properties superior to the thermodynamic stable form I which contains corrugated hydrogen bonded layers of molecules. In this study, the structure of Paracetamol (PCA)-Oxalic acid (OXA) co-crystal has been analyzed and found layered structure similar to PCA form II which enhance ability to form tablet. The Density Functional Theory (DFT) has been conducted to find some physicochemical properties of co-crystal. It was observed that the lattice energy of co-crystal is more than that of PCA form II showing more stability on co-crystal. The energy gap between highest occupied molecular orbital and lowest unoccupied molecular orbital (HOMO-LUMO gap) in co-crystal was found less than PCA form II showing bigger enhancement of reactivity.

scholarly journals Exploration of promising optical and electronic properties of (non-polymer) small donor molecules for organic solar cells

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Muhammad Khalid ◽  
Muhammad Usman Khan ◽  
Saeed Ahmed ◽  
Zahid Shafiq ◽  
Mohammed Mujahid Alam ◽  
...  
Keyword(s):  
Density Functional Theory ◽  
Solar Cells ◽  
Organic Solar Cells ◽  
Density Functional ◽  
Reorganization Energy ◽  
Energy Difference ◽  
Open Circuit ◽  
Frontier Molecular Orbital ◽  
Functional Theory ◽  
Td Dft

AbstractNon-fullerene based organic compounds are considered promising materials for the fabrication of modern photovoltaic materials. Non-fullerene-based organic solar cells comprise of good photochemical and thermal stability along with longer device lifetimes as compared to fullerene-based compounds. Five new non-fullerene donor molecules were designed keeping in view the excellent donor properties of 3-bis(4-(2-ethylhexyl)-thiophen-2-yl)-5,7-bis(2ethylhexyl) benzo[1,2-:4,5-c′]-dithiophene-4,8-dione thiophene-alkoxy benzene-thiophene indenedione (BDD-IN) by end-capped modifications. Photovoltaic and electronic characteristics of studied molecules were determined by employing density functional theory (DFT) and time dependent density functional theory (TD-DFT). Subsequently, obtained results were compared with the reference molecule BDD-IN. The designed molecules presented lower energy difference (ΔΕ) in the range of 2.17–2.39 eV in comparison to BDD-IN (= 2.72 eV). Moreover, insight from the frontier molecular orbital (FMO) analysis disclosed that central acceptors are responsible for the charge transformation. The designed molecules were found with higher λmax values and lower transition energies than BDD-IN molecule due to stronger end-capped acceptors. Open circuit voltage (Voc) was observed in the higher range (1.54–1.78 V) in accordance with HOMOdonor–LUMOPC61BM by designed compounds when compared with BDD-IN (1.28 V). Similarly, lower reorganization energy values were exhibited by the designed compounds in the range of λe(0.00285–0.00370 Eh) and λh(0.00847–0.00802 Eh) than BDD-IN [λe(0.00700 Eh) and λh(0.00889 Eh)]. These measurements show that the designed compounds are promising candidates for incorporation into solar cell devices, which would benefit from better hole and electron mobility.

EFFECT OF ASYMMETRIC LATERAL LINKING GROUPS ON THE ELECTRONIC TRANSPORT IN MOLECULAR DEVICE

2021 ◽  
Author(s):  
YAMIN WU ◽  
BIN LIAO ◽  
GUOLIANG WANG ◽  
BAOAN Bian
Keyword(s):  
Density Functional Theory ◽  
Molecular Orbital ◽  
Electronic Transport ◽  
Density Functional ◽  
Molecular Junctions ◽  
Frontier Molecular Orbital ◽  
Asymmetric Distribution ◽  
Molecular Device ◽  
Functional Theory ◽  
Lateral Linking

The effect of asymmetric lateral linking groups on the electronic transport is investigated in the biphenyl molecule-based device with gold electrodes with the framework of density functional theory and nonequilibrium Green’s function. The asymmetric lateral linking groups reduce the currents of molecular junctions, and result in the reverse rectifying behavior. The devices with asymmetric lateral linking groups –SH and –SCH3 have maximum rectifying ratios, while the asymmetric lateral linking group –SH and –NH2 cause minimum rectifying ratios. The calculated results suggest that the asymmetric lateral linking group induces the reduced coupling between molecule and right electrode, asymmetric distribution of frontier molecular orbital and asymmetric evolution of the molecular orbital eigenenergies, accounting for the rectifying behavior.

Sign in / Sign up

Export Citation Format

Share Document