On the non-gaussian nature of the dynamic response of skeletal offshore structures subjected to gaussian ocean waves

1994 ◽  
Author(s):  
Glenn Rowan Hooper
1984 ◽  
Vol 1 (19) ◽  
pp. 197
Author(s):  
Hajime Ishida ◽  
Yoshinori Konda

This paper has dealt with the dynamic response of offshore structures to the ocean waves. In order to establish the calculation scheme for offshore structures, the methods of transfer matrices and of structural-property matrices have been introduced and applied to the analysis of dynamic response of pile structures. The validity of these calculation methods have been verified by the experiments in the laboratory.


Author(s):  
Shuangxi Guo ◽  
Yilun Li ◽  
Min Li ◽  
Weimin Chen ◽  
Yiqin Fu

Recently, wind turbine has been developed from onshore area to offshore area because of more powerful available wind energy in ocean area and more distant and less harmful noise coming from turbine. As it is approaching toward deeper water depth, the dynamic response of the large floating wind turbine experiencing various environmental loads becomes more challenge. For examples, as the structural size gets larger, the dynamic interaction between the flexible bodies such as blades, tower and catenary mooring-lines become more profound, and the dynamic behaviors such as structural inertia and hydrodynamic force of the mooring-line get more obvious. In this paper, the dynamic response of a 5MW floating wind turbine undergoing different ocean waves is examined by our FEM approach in which the dynamic behaviors of the catenary mooring-line are involved and the integrated system including flexible multi-bodies such as blades, tower, spar platform and catenaries can be considered. Firstly, the nonlinear dynamic model of the integrated wind turbine is developed. Different from the traditional static restoring force, the dynamic restoring force is analyzed based on our 3d curved flexible beam approach where the structural curvature changes with its spatial position and the time in terms of vector equations. And, the modified finite element simulation is used to model a flexible and moving catenary of which the hydrodynamic load depending on the mooring-line’s motion is considered. Then, the nonlinear dynamic governing equations is numerically solved by using Newmark-Beta method. Based on our numerical simulations, the influences of the dynamic behaviors of the catenary mooring-line on its restoring performance are presented. The dynamic responses of the floating wind turbine, e.g. the displacement of the spar and top tower and the dynamic tension of the catenary, undergoing various ocean waves, are examined. The dynamic coupling between different spar motions, i.e. surge and pitch, are discussed too. Our numerical results show: the dynamic behaviors of mooring-line may significantly increase the top tension, particularly, the peak-trough tension gap of snap tension may be more than 9 times larger than the quasi-static result. When the wave frequency is much higher than the system, the dynamic effects of the mooring system will accelerate the decay of transient items of the dynamic response; when the wave frequency and the system frequency are close to each other, the displacement of the spar significantly reduces by around 26%. Under regular wave condition, the coupling between the surge and pitch motions are not obvious; but under extreme condition, pitch motion may get about 20% smaller than that without consideration of the coupling between the surge and pitch motions.


Author(s):  
Chinsu Mereena Joy ◽  
Anitha Joseph ◽  
Lalu Mangal

Demand for renewable energy sources is rapidly increasing since they are able to replace depleting fossil fuels and their capacity to act as a carbon neutral energy source. A substantial amount of such clean, renewable and reliable energy potential exists in offshore winds. The major engineering challenge in establishing an offshore wind energy facility is the design of a reliable and financially viable offshore support for the wind turbine tower. An economically feasible support for an offshore wind turbine is a compliant platform since it moves with wave forces and offer less resistance to them. Amongst the several compliant type offshore structures, articulated type is an innovative one. It is flexibly linked to the seafloor and can move along with the waves and restoring is achieved by large buoyancy force. This study focuses on the experimental investigations on the dynamic response of a three-legged articulated structure supporting a 5MW wind turbine. The experimental investigations are done on a 1: 60 scaled model in a 4m wide wave flume at the Department of Ocean Engineering, Indian Institute of Technology, Madras. The tests were conducted for regular waves of various wave periods and wave heights and for various orientations of the platform. The dynamic responses are presented in the form of Response Amplitude Operators (RAO). The study results revealed that the proposed articulated structure is technically feasible in supporting an offshore wind turbine because the natural frequencies are away from ocean wave frequencies and the RAOs obtained are relatively small.


1991 ◽  
Vol 113 (2) ◽  
pp. 156-161
Author(s):  
S. R. Winterstein ◽  
S. Haver

Probabilistic models of combined environmental variables are shown, and their effect on the probability distribution of annual maximum base shear is estimated. A new “generalized Gumbel” model is introduced for the critical wave height parameter. By preserving higher statistical moments, this model better follows extreme storm events. Uncertainty in this model is included through statistical uncertainty in these moments. Corresponding reliability confidence intervals are also shown as a function of the sample size of hindcast data. Finally, models of the non-Gaussian crest and the drag parameter are found to be of similar importance in predicting the 100-yr base shear.


Author(s):  
Jo̸rgen Juncher Jensen

For bottom-supported offshore structures like oil drilling rigs and oil production platforms, a deterministic design wave approach is often applied using a regular non-linear Stokes’ wave. Thereby, the procedure accounts for non-linear effects in the wave loading but the randomness of the ocean waves is poorly represented, as the shape of the wave spectrum does not enter the wave kinematics. To overcome this problem and still keep the simplicity of a deterministic approach, Tromans, Anaturk and Hagemeijer (1991) suggested the use of a deterministic wave, defined as the expected linear Airy wave, given the value of the wave crest at a specific point in time or space. In the present paper a derivation of the expected second order short-crested wave riding on a uniform current is given. The analysis is based on the second order Sharma and Dean shallow water wave theory and the direction of the main wind direction can make any direction with the current. Numerical results showing the importance of the water depth, the directional spreading and the current on the conditional mean wave profile and the associated wave kinematics are presented. A discussion of the use of the conditional wave approach as design waves is given.


Author(s):  
Yanfei Deng ◽  
Jianmin Yang ◽  
Longfei Xiao

In the last few decades, the hydrodynamic performance of offshore structures has been widely studied to ensure their safety as well as to achieve an economical design. However, an increasing number of reported accidents due to rough ocean waves call for in-depth investigations on the loads and motions of offshore structures, particularly the effect of freak waves. The aim of this paper is to determine the sea conditions that may cause the maximum motion responses of offshore structures, which have a significant effect on the loads of mooring systems because of their tight relationship. As a preliminary step, the response amplitude operators (RAOs) of a semisubmersible platform of 500 meters operating depth are obtained with the frequency-domain analysis method. Subsequently, a series of predetermined extreme wave sequences with different wave group characteristics, such as the maximum crest amplitude and the time lag between successive high waves, are adopted to calculate the hydrodynamic performance of the semisubmersible with mooring systems in time-domain. The paper shows that the maximum motion responses not only depend on the largest wave crest amplitude but also the time lags between successive giant waves. This paper will provide an important reference for future designs which could consider the most dangerous wave environment.


Sign in / Sign up

Export Citation Format

Share Document