scholarly journals Potential of Multi constellation Global Navigation Satellite System in Indian Missile Test Range Applications

2020 ◽  
Vol 70 (6) ◽  
pp. 682-691
Author(s):  
Mrinal Goswami ◽  
Somnath Mahato ◽  
Rowdra Ghatak ◽  
Anindya Bose
Keyword(s):  
Global Navigation Satellite System ◽  
Satellite System ◽  
Optical Tracking ◽  
Navigation Satellite ◽  
Bias Estimation ◽  
Test Range ◽  
Global Navigation ◽  
Position Solution ◽  
Global Navigation Satellite ◽  
Missile Test

In this paper, the potentials of using Global Navigation Satellite System (GNSS) techniques in the complex calibration procedure of the tracking sensors for missile test range applications have been presented. The frequently used tracking sensors in test range applications are- electro-optical tracking stations (EOTS) and tracking radars. Over the years, the EOTS are used as the reference for bias estimation of the radars. With the introduction of GPS in test range applications, especially the DGPS, the reference for bias estimation got shifted to DGPS from the EOTS. However, the achievable position solution accuracy is limited to the order of a few meters for DGPS, EOTS, and Radars. With the evolution of Multi-constellation GNSS and carrier-phase based measurement techniques in satellite navigation, achievable position solution accuracies may be improved to sub-meter level. New navigation techniques like real time kinematic (RTK) and precise point positioning have the potentials for use in the calibration procedures of the missile test ranges to the accuracies of centimeter-level. Moreover, because of the availability of a large number of navigation signals over the Indian region, multi-constellation GNSS receivers can enhance signal availability, reliability, and accuracies during the calibration of missile test ranges. Currently available compact, low-cost GNSS modules also offer the possibilities of using these for cost-effective, networked RTK for dynamic calibration of test ranges reducing cost and resource requirements.

scholarly journals OutFin, a multi-device and multi-modal dataset for outdoor localization based on the fingerprinting approach

2021 ◽  
Vol 8 (1) ◽  
Author(s):  
Fahad Alhomayani ◽  
Mohammad H. Mahoor
Keyword(s):  
Global Navigation Satellite System ◽  
Urban Areas ◽  
Satellite System ◽  
Reference Points ◽  
Navigation Satellite ◽  
Data Types ◽  
Entry Barrier ◽  
Promising Alternative ◽  
Global Navigation ◽  
Global Navigation Satellite

AbstractIn recent years, fingerprint-based positioning has gained researchers’ attention since it is a promising alternative to the Global Navigation Satellite System and cellular network-based localization in urban areas. Despite this, the lack of publicly available datasets that researchers can use to develop, evaluate, and compare fingerprint-based positioning solutions constitutes a high entry barrier for studies. As an effort to overcome this barrier and foster new research efforts, this paper presents OutFin, a novel dataset of outdoor location fingerprints that were collected using two different smartphones. OutFin is comprised of diverse data types such as WiFi, Bluetooth, and cellular signal strengths, in addition to measurements from various sensors including the magnetometer, accelerometer, gyroscope, barometer, and ambient light sensor. The collection area spanned four dispersed sites with a total of 122 reference points. Each site is different in terms of its visibility to the Global Navigation Satellite System and reference points’ number, arrangement, and spacing. Before OutFin was made available to the public, several experiments were conducted to validate its technical quality.

Implementation of a Dual-Frequency GLONASS and GPS L1 C/A Software Receiver

2010 ◽  
Vol 63 (2) ◽  
pp. 269-287 ◽  
Author(s):  
S. Abbasian Nik ◽  
M. G. Petovello
Keyword(s):  
Global Navigation Satellite System ◽  
Critical Role ◽  
Satellite System ◽  
Navigation Satellite ◽  
Dual Frequency ◽  
Software Receiver ◽  
The Public ◽  
Global Navigation ◽  
Global Navigation Satellite

These days, Global Navigation Satellite System (GNSS) technology plays a critical role in positioning and navigation applications. Use of GNSS is becoming more of a need to the public. Therefore, much effort is needed to make the civilian part of the system more accurate, reliable and available, especially for the safety-of-life purposes. With the recent revitalization of Russian Global Navigation Satellite System (GLONASS), with a constellation of 20 satellites in August 2009 and the promise of 24 satellites by 2010, it is worthwhile concentrating on the GLONASS system as a method of GPS augmentation to achieve more reliable and accurate navigation solutions.

scholarly journals Computation Approach for Quantitative Dielectric Constant from Time Sequential Data Observed by CYGNSS Satellites

2021 ◽  
Vol 13 (11) ◽  
pp. 2032
Author(s):  
Junchan Lee ◽  
Sunil Bisnath ◽  
Regina S.K. Lee ◽  
Narin Gavili Kilane
Keyword(s):  
Dielectric Constant ◽  
Soil Moisture ◽  
Global Navigation Satellite System ◽  
Measurement Data ◽  
Satellite System ◽  
Computation Method ◽  
Navigation Satellite ◽  
Local Soil ◽  
Global Navigation ◽  
Global Navigation Satellite

This paper describes a computation method for obtaining dielectric constant using Global Navigation Satellite System reflectometry (GNSS-R) products. Dielectric constant is a crucial component in the soil moisture retrieval process using reflected GNSS signals. The reflectivity for circular polarized signals is combined with the dielectric constant equation that is used for radiometer observations. Data from the Cyclone Global Navigation Satellite System (CYGNSS) mission, an eight-nanosatellite constellation for GNSS-R, are used for computing dielectric constant. Data from the Soil Moisture Active Passive (SMAP) mission are used to measure the soil moisture through its radiometer, and they are considered as a reference to confirm the accuracy of the new dielectric constant calculation method. The analyzed locations have been chosen that correspond to sites used for the calibration and validation of the SMAP soil moisture product using in-situ measurement data. The retrieved results, especially in the case of a specular point around Yanco, Australia, show that the estimated results track closely to the soil moisture results, and the Root Mean Square Error (RMSE) in the estimated dielectric constant is approximately 5.73. Similar results can be obtained when the specular point is located near the Texas Soil Moisture Network (TxSON), USA. These results indicate that the analysis procedure is well-defined, and it lays the foundation for obtaining quantitative soil moisture content using the GNSS reflectometry results. Future work will include applying the computation product to determine the characteristics that will allow for the separation of coherent and incoherent signals in delay Doppler maps, as well as to develop local soil moisture models.

APLICAÇÃO DE GEOTECNOLOGIAS NA ANÁLISE DE VIABILIDADE TÉCNICA E ECONÔMICA DO PROJETO DE IMPLANTAÇÃO DO IFMA - CAMPUS ITAQUI-BACANGA.

2021 ◽  
Vol 14 (2) ◽  
pp. 105
Author(s):  
Maelckson Bruno Barros Gomes ◽  
André Luis Silva Santos
Keyword(s):  
Real Time ◽  
Global Navigation Satellite System ◽  
Satellite System ◽  
Navigation Satellite ◽  
Real Time Kinematic ◽  
Global Navigation ◽  
Global Navigation Satellite

<p class="04CorpodoTexto">Este artigo tem por objetivo aplicar geotecnologias para obtenção de informações planialtimétricas a fim de avaliar a viabilidade de implantação do campus Centro Histórico/Itaqui-Bacanga do IFMA. Considerando que para realização de levantamento por métodos tradicionais é recomendado que seja realizado o destocamento e a limpeza do terreno previamente, avaliou-se a realização do levantamento planialtimétrico a partir de um par de receptores <em>Global Navigation Satellite System</em> (GNSS) pelo método <em>Real Time Kinematic</em> (RTK) pós processado e também a partir da realização de levantamento fotogramétrico, utilizando aeronave remotamente pilotada (ARP), popularmente conhecida como drone. Esta análise permitiu demonstrar que o aerolevantamento com a ARP pode ser aplicado na concepção inicial de um projeto de engenharia, conforme classificação do Tribunal de Contas da União (TCU) para níveis de precisão, pois obteve-se uma diferença orçamentária de 19% entre os projetos elaborados a partir das duas geotecnologias.</p><div> </div>

Sign in / Sign up

Export Citation Format

Share Document