A building bio-climatic design tool incorporating passive strategies in residential dwellings design of composite climate of India

2022 ◽  
Vol 21 (1/2) ◽  
pp. 175
Author(s):  
Chandan Kumar ◽  
Sanjay Kumar ◽  
K.B. Rana ◽  
Anuj Mathur
Keyword(s):  
Design Tool ◽  
Passive Strategies

Flexural design of precast, prestressed ultra-high-performance concrete members

PCI Journal ◽  
2020 ◽  
Vol 65 (6) ◽  
pp. 35-61
Author(s):  
Chungwook Sim ◽  
Maher Tadros ◽  
David Gee ◽  
Micheal Asaad
Keyword(s):  
Prestressed Concrete ◽  
High Performance ◽  
High Performance Concrete ◽  
Limit State ◽  
Design Guidelines ◽  
Design Tool ◽  
Supplementary Cementitious Materials ◽  
Ultra High Performance Concrete ◽  
Concrete Members ◽  
Cylinder Strength

Ultra-high-performance concrete (UHPC) is a special concrete mixture with outstanding mechanical and durability characteristics. It is a mixture of portland cement, supplementary cementitious materials, sand, and high-strength, high-aspect-ratio microfibers. In this paper, the authors propose flexural design guidelines for precast, prestressed concrete members made with concrete mixtures developed by precasters to meet minimum specific characteristics qualifying it to be called PCI-UHPC. Minimum specified cylinder strength is 10 ksi (69 MPa) at prestress release and 18 ksi (124 MPa) at the time the member is placed in service, typically 28 days. Minimum flexural cracking and tensile strengths of 1.5 and 2 ksi (10 and 14 MPa), respectively, according to ASTM C1609 testing specifications are required. In addition, strain-hardening and ductility requirements are specified. Tensile properties are shown to be more important for structural optimization than cylinder strength. Both building and bridge products are considered because the paper is focused on capacity rather than demand. Both service limit state and strength limit state are covered. When the contribution of fibers to capacity should be included and when they may be ignored is shown. It is further shown that the traditional equivalent rectangular stress block in compression can still be used to produce satisfactory results in prestressed concrete members. A spreadsheet workbook is offered online as a design tool. It is valid for multilayers of concrete of different strengths, rows of reinforcing bars of different grades, and prestressing strands. It produces moment-curvature diagrams and flexural capacity at ultimate strain. A fully worked-out example of a 250 ft (76.2 m) span decked I-beam of optimized shape is given.

QFD APPROACH FOR QUALITY IMPROVEMENT OF A SUSTAINABLE PRODUCT-SERVICE SYSTEM

2019 ◽  
Vol 1 (1) ◽  
pp. 76
Author(s):  
Nur Indrianti ◽  
Devika Kumala ◽  
Tri Wibawa
Keyword(s):  
Quality Improvement ◽  
Quality Function Deployment ◽  
Service System ◽  
Design Tool ◽  
Productivity Index ◽  
Product Service System ◽  
Goods And Services ◽  
Product Service ◽  
Service Productivity ◽  
Sustainability Concept

Increasing awareness of the importance of services has given rise to the concept of product-service system where goods and services are sold as an integrated package to customers. On the other hand, the emerging sustainability concept has escalated the demand for sustainability for industries. Consequently, it is necessary to build strategies that lead the company to achieve sustainability goals while keeping competitiveness. Drawing on the necessity service and sustainability concept in the quality improvement of the product-service system, this study aims to develop a systematic design tool by filling the gap to the previous studies. We used Quality Function Deployment (QFD) approach by considering customer requirements (VoC) and stakeholder requirements (VoSt), instead of VoC only, based on the service and sustainability dimensions. We refer to the proposed QFD approach as QFDSPS. We introduce service productivity index (SPI) to measure the performance of the system. Thus, in the proposed methodology, the strategies for quality improvement were defined as subject to VoC, VoSt, and SPI. The methodology was implemented in a Javanese restaurant which meets the characteristics of a product-service system. The result shows that the proposed method can be implemented. The implications due to the implementation of the method are also discussed.

VISUAL DESIGN TOOL FOR ELECTROSTATIC LELSES

2014 ◽  
Vol 5 (2) ◽  
pp. 778-789
Author(s):  
Hassan Nouri Al-Obaidi ◽  
Ali A. Rashead Al-Azawy
Keyword(s):  
Programming Languages ◽  
Electrostatic Potential ◽  
Electric Energy ◽  
Visual Basic ◽  
Visual Programming ◽  
Design Tool ◽  
Mesh Point ◽  
Visual Design ◽  
Computational Tool ◽  
Electrostatic Lenses

Current research presents a visual-computational tool to design and investigate round electrostatic lenses in sense of analysis procedure. The finite elements methods is adopted to find the electrostatic potential in the lens region. Laplace’s equation is first replaced by a certain functional which physically represent the electric energy stored in the electric field. This functional is then minimized at each mesh point with respect to the nearest eight ones. This minimization process is proved to be entirely equivalent to solving Laplace’s equation. The requirement that the functional being minimized is then yields a set of nine point equations which inter relate the potentials at adjacent mesh points. Finally this set of equations is solved to find the electrostatic potential at each mesh point in the region of the lens under consideration. The procedure steps mention above are coded to program written in visual basic. Hence an interface tool for analyzing and designing electrostatic lenses has been built up. Designing results proved that the introduced tools has an excellent outputs in comparison with the others written in not visual programming languages. Furthermore it easier for researchers and designer to use such a tool over their counterpart ones.

A Robustness Assessment for Design Tool

2012 ◽  
Author(s):  
Byoung Kim ◽  
Matt Engelman ◽  
Sonia Vohnout ◽  
Esko Mikkola ◽  
Brett Jordan
Keyword(s):  
Design Tool ◽  
Robustness Assessment

Correction: Nozzle Jet Effects Conceptual Design Tool for a Generic Fighter

2019 ◽  
Author(s):  
Valeria S. Guevara ◽  
Mark Moening ◽  
Brian R. Smith ◽  
Dennis B. Finley ◽  
Patrick J. Yagle
Keyword(s):  
Conceptual Design ◽  
Design Tool

Rancang Bangun Alat Olahan Minyak Kelapa

2016 ◽  
Vol 10 (1) ◽  
pp. 70-77
Author(s):  
Jantri Sirait ◽  
Sulharman Sulharman
Keyword(s):  
Electric Motor ◽  
Performance Test ◽  
Production Capacity ◽  
Coconut Oil ◽  
Heating Time ◽  
Design Tool ◽  
Coconut Milk ◽  
Heating Process ◽  
And Performance ◽  
Time Required

Has done design tool is a tool of refined coconut oil coconut grater, squeezer coconut milk and coconut oil heating, with the aim to streamline the time of making coconut oil and coconut oil increase production capacity. The research method consists of several stages, among others; image creation tool, procurement of materials research, cutting the material - the material framework of tools and performance test tools. The parameters observed during the performance test tools is time grated coconut, coconut milk bleeder capacity, the capacity of the boiler and the heating time of coconut oil. The design tool consists of three parts, namely a tool shaved coconut, coconut milk wringer and coconut milk heating devices. Materials used for the framework of such tools include iron UNP 6 meters long, 7.5 cm wide, 4 mm thick, while the motor uses an electric motor 0.25 HP 1430 rpm and to dampen the rotation electric motor rotation used gearbox with a ratio of round 1 : 60. the results of the design ie the time required for coconut menyerut average of 297 seconds, coconut milk wringer capacity of 5 kg of processes and using gauze pads to filter coconut pulp, as well as the heating process takes ± 2 hours with a capacity of 80 kg , The benefits of coconut oil refined tools are stripping time or split brief coconut average - average 7 seconds and coconut shell can be used as craft materials, processes extortion coconut milk quickly so the production capacity increased and the stirring process coconut oil mechanically.ABSTRAKTelah dilakukan rancang bangun alat olahan minyak kelapa yaitu alat pemarut kelapa, pemeras santan kelapa dan pemanas minyak kelapa, dengan tujuan untuk mengefisiensikan waktu pembuatan minyak kelapa serta meningkatkan kapasitas produksi minyak kelapa. Metode penelitian terdiri dari beberapa tahapan antara lain; pembuatan gambar alat, pengadaan bahan-bahan penelitian, pemotongan bahan - bahan rangka alat dan uji unjuk kerja alat. Parameter yang diamati pada saat uji unjuk kerja alat adalah waktu parut kelapa, kapasitas pemeras santan kelapa, kapasitas tungku pemanas serta waktu pemanasan minyak kelapa. Rancangan alat terdiri dari tiga bagian yaitu alat penyerut kelapa, alat pemeras santan kelapa dan alat pemanas santan kelapa. Bahan yang dipergunakan untuk rangka alat tersebut  yaitu besi UNP panjang 6 meter, lebar 7,5 cm, tebal 4 mm, sedangkan untuk motor penggerak menggunakan motor listrik 0,25 HP 1430 rpm dan untuk meredam putaran putaran motor listrik dipergunakan gearbox  dengan perbandingan putaran 1 : 60. Hasil dari rancangan tersebut yaitu waktu yang dibutuhkan untuk menyerut kelapa rata-rata 297 detik, kapasitas alat pemeras santan kelapa 5 kg sekali proses dan menggunakan kain kassa untuk menyaring ampas kelapa, serta Proses pemanasan membutuhkan waktu ± 2 jam dengan kapasitas 80 kg. Adapun keunggulan alat olahan minyak kelapa ini adalah waktu pengupasan atau belah kelapa singkat rata – rata 7 detik dan tempurung kelapa dapat digunakan sebagai bahan kerajinan, proses pemerasan santan kelapa cepat sehingga kapasitas produksi meningkat dan proses pengadukan minyak kelapa secara mekanis. Kata kunci : penyerut, pemeras, pemanas,minyak kelapa,olahan minyak kelapa.

Sign in / Sign up

Export Citation Format

Share Document