Impact of sand content on filter cake and invert emulsion drilling fluid properties in extended reach horizontal wells

2018 ◽  
Vol 19 (2) ◽  
pp. 135 ◽  
Author(s):  
Abdulaziz Al Majed ◽  
Mohamed Mahmoud ◽  
Badr S. Bageri ◽  
Salaheldin Elkatatny
Keyword(s):  
Filter Cake ◽  
Drilling Fluid ◽  
Horizontal Wells ◽  
Sand Content ◽  
Invert Emulsion ◽  
Fluid Properties

Impact of Sand Content on Filter Cake and Drilling Fluid Properties in Extended Reach Horizontal Wells

2015 ◽  
Author(s):  
B. S. Bageri ◽  
M. A. Mahmoud ◽  
A. A. Al-Majed ◽  
A. Abdulraheem ◽  
S. H. Al-Mutairi
Keyword(s):  
Filter Cake ◽  
Drilling Fluid ◽  
Horizontal Wells ◽  
Sand Content ◽  
Fluid Properties

Low ECD High Performance Invert Emulsion Drilling Fluids: Lab Development and Field Deployment

2021 ◽  
Author(s):  
Vikrant Wagle ◽  
Abdullah Yami ◽  
Michael Onoriode ◽  
Jacques Butcher ◽  
Nivika Gupta
Keyword(s):  
High Performance ◽  
Filter Cake ◽  
Drilling Fluid ◽  
Field Performance ◽  
Superior Performance ◽  
Core Material ◽  
Drilling Fluids ◽  
Invert Emulsion ◽  
Field Deployment ◽  
Permeability Studies

Abstract The present paper describes the results of the formulation of an acid-soluble low ECD organoclay-free invert emulsion drilling fluid formulated with acid soluble manganese tetroxide and a specially designed bridging package. The paper also presents a short summary of field applications to date. The novel, non-damaging fluid has superior rheology resulting in lower ECD, excellent suspension properties for effective hole cleaning and barite-sag resistance while also reducing the risk of stuck pipe in high over balance applications. 95pcf high performance invert emulsion fluid (HPIEF) was formulated using an engineered bridging package comprising of acid-soluble bridging agents and an acid-soluble weighting agent viz. manganese tetroxide. The paper describes the filtration and rheological properties of the HPIEF after hot rolling at 300oF. Different tests such as contamination testing, sag-factor analysis, high temperature-high pressure rheology measurements and filter-cake breaking studies at 300oF were performed on the HPIEF. The 95pcf fluid was also subjected to particle plugging experiments to determine the invasion characteristics and the non-damaging nature of the fluids. The 95pcf HPIEF exhibited optimal filtration properties at high overbalance conditions. The low PV values and rheological profile support low ECDs while drilling. The static aging tests performed on the 95pcf HPIEF resulted in a sag factor of less than 0.53, qualifying the inherent stability for expected downhole conditions. The HPIEF demonstrated resilience to contamination testing with negligible change in properties. Filter-cake breaking experiments performed using a specially designed breaker fluid system gave high filter-cake breaking efficiency. Return permeability studies were performed with the HPIEF against synthetic core material, results of which confirmed the non-damaging design of the fluid. The paper thus demonstrates the superior performance of the HPIEF in achieving the desired lab and field performance.

Effect of Sand Content on the Filter Cake Properties and Removal During Drilling Maximum Reservoir Contact Wells in Sandstone Reservoir

2015 ◽  
Vol 138 (3) ◽  
Author(s):  
Badr S. Ba geri ◽  
Mohamed Mahmoud ◽  
Saleh. H. Al-Mutairi ◽  
Abdulazeez Abdulraheem
Keyword(s):  
Calcium Carbonate ◽  
Filter Cake ◽  
Flow Line ◽  
Drilling Fluid ◽  
Horizontal Section ◽  
Fluid Properties ◽  
Porosity And Permeability ◽  
Sand Particles ◽  
Sandstone Reservoir ◽  
Sandstone Formation

The drilling mud program contains many tests such as filtration rate and filter cake properties to select the proper drilling fluid additives that yield the standard ranges of the viscosity, filtration rate, etc. However, the physical and chemical changes in the mud composition during the mud circulating will cause changes to the filter cake properties. The changes in the filter cake properties should be considered in the mud design program to prevent the problems associated with the change in the drilling fluid properties. For long horizontal wellbores penetrating plastic formations, the two sources of solids in filter cake are drilling chemical additives and formation cuttings (sand particles in the case of sandstone reservoir). This study focuses on the effect of introducing sand particles from the drilled—formations on the filter cake properties. Real drilling fluid samples from the field were collected at different location during drilling a 3600 ft of the horizontal section of a sandstone formation. Calcium Carbonate (CaCO3) was used as weighting material in this filed. The drilling fluid samples were collected at two different points: the flow line coming from the well after shale shaker and the flow line going to the well to verify the effect of separation stages on filter cake properties. The primary drilling fluid properties of the collected samples were measured such as density and rheological parameters. High pressure high temperature (HPHT) filter press was used to perform the filtration and filter cake experiments at 300 psi differential pressure and room temperature (25 °C). The mineralogy of the external filter cake formed by fluid loss cell is determined using SEM (scanning electron microscopy) and XRD (X-ray diffraction). Finally, solubility test was conducted to evaluate the effect of sand particles on filter cake removal (containing Calcium Carbonate as weighting material) using chelating agent: glutamic diacetic acid (GLDA) at pH 4. The results showed that for long horizontal sections, the effect of introducing sand particles to the composition of the filter cake can cause significant change to the properties of filter cake such as mineralogy, thickness, porosity, and permeability. For instant the thickness of filter cake increased about 40% of its original thickness when drilling sandstone formation in horizontal well due to fine sand particle settling. The filter cake porosity and permeability increment in the first 2000 ft part of the horizontal section was observed clearly due to the irregular shape of the drilling particles. However for the points after the first 2000 ft of horizontal lateral, the porosity and permeability almost remained constant. Increasing the sand content up to 20% degrade the dissolution rate of calcium carbonate in the GLDA (pH = 3.8) to 80% instead of 100%.

scholarly journals Effect of Arenite, Calcareous, Argillaceous, and Ferruginous Sandstone Cuttings on Filter Cake and Drilling Fluid Properties in Horizontal Wells

Geofluids ◽  
2019 ◽  
Vol 2019 ◽  
pp. 1-10 ◽  
Author(s):  
Badr S. Bageri ◽  
Mohammed Benaafi ◽  
Mohamed Mahmoud ◽  
Shirish Patil ◽  
Abdelmjeed Mohamed ◽  
...  
Keyword(s):  
Filter Cake ◽  
Drilling Fluid ◽  
Clay Content ◽  
Point Of View ◽  
Fluid Loss ◽  
X Ray ◽  
Fluid Properties ◽  
Porosity And Permeability ◽  
Sandstone Formation ◽  
The Impact

Fine, small-size, drilled cuttings, if not properly separated using mud conditioning equipment at the surface, are circulated with the drilling fluid from the surface to the bottom hole. These drilled cuttings have a significant effect on the drilling fluid properties and filter cake structure. During drilling long lateral sandstone formations, different cuttings with varied properties will be generated due to sandstone formations being heterogeneous and having different mineralogical compositions. Thus, the impact of these cuttings on the drilling fluid and filter cake properties will be different based on their mineralogy. In this paper, the effect of different sandstone formation cuttings, including arenite (quartz rich), calcareous (calcite rich), argillaceous (clay rich), and ferruginous (iron rich) sandstones, on the filter cake and drilling fluid properties was investigated. Cuttings of the mentioned sandstone formations were mixed with the drilling fluid to address the effect of these minerals on the filter cake thickness, porosity, and permeability. In addition, the effect of different sandstone formation cuttings on drilling fluid density and rheology, apparent viscosity (AV), plastic viscosity PV), and yield point (YP) was investigated. High-pressure high-temperature (HPHT) fluid loss test was conducted to form the filter cake. The core sample’s petrophysical properties were determined using X-ray fluorescence (XRF) and X-ray diffraction (XRD) techniques and scanning electron microscopy (SEM). The results of this work indicated that all cutting types increased the rheological properties when added to the drilling fluid at the same loadings but the argillaceous sandstone (clay rich) has a dominant effect compared to the other types because the higher clay content enhanced the rheology. From the filter cake point of view, the ferruginous sandstone improved the filter cake sealing properties and reduced its thickness, while the argillaceous cuttings degraded the filter cake porosity and permeability and allowed the finer cuttings to penetrate deeply in the filter medium.

The Influence of SiO2 and TiO2 Nanoparticles on the Properties of Water-Based Mud

2017 ◽  
Author(s):  
Petar Mijić ◽  
Nediljka Gaurina-Međimurec ◽  
Borivoje Pašić
Keyword(s):  
Filter Cake ◽  
Drilling Fluid ◽  
Wellbore Stability ◽  
Drilling Fluids ◽  
Drilling Mud ◽  
Shale Formations ◽  
Wellbore Instability ◽  
Water Based ◽  
Fluid Properties

About 75% of all formations drilled worldwide are shale formations and 90% of all wellbore instability problems occur in shale formations. This increases the overall cost of drilling. Therefore, drilling through shale formations, which have nanosized pores with nanodarcy permeability still need better solutions since the additives used in the conventional drilling fluids are too large to plug them. One of the solutions to drilling problems can be adjusting drilling fluid properties by adding nanoparticles. Drilling mud with nanoparticles can physically plug nanosized pores in shale formations and thus reduce the shale permeability, which results in reducing the pressure transmission and improving wellbore stability. Furthermore, the drilling fluid with nanoparticles, creates a very thin, low permeability filter cake resulting in the reduction of the filtrate penetration into the shale. This thin filter cake implies high potential for reducing the differential pressure sticking. In addition, borehole problems such as too high drag and torque can be reduced by adding nanoparticles to drilling fluids. This paper presents the results of laboratory examination of the influence of commercially available nanoparticles of SiO2 (dry SiO2 and water-based dispersion of 30 wt% of silica), and TiO2 (water-based dispersion of 40 wt% of titania) in concentrations of 0.5 wt% and 1 wt% on the properties of water-based fluids. Special emphasis is put on the determination of lubricating properties of the water-based drilling fluids. Nanoparticles added to the base mud without any lubricant do not improve its lubricity performance, regardless of their concentrations and type. However, by adding 0.5 wt% SiO2-disp to the base mud with lubricant, its lubricity coefficient is reduced by 4.6%, and by adding 1 wt% TiO2-disp to the base mud with lubricant, its lubricity coefficient is reduced by 14.3%.

scholarly journals Wet Drilled Cuttings Bed Rheology

Energies ◽  
2021 ◽  
Vol 14 (6) ◽  
pp. 1644
Author(s):  
Camilo Pedrosa ◽  
Arild Saasen ◽  
Bjørnar Lund ◽  
Jan David Ytrehus
Keyword(s):  
Drilling Fluid ◽  
Drilling Fluids ◽  
Parallel Plates ◽  
Single Particles ◽  
Cuttings Transport ◽  
Transport Studies ◽  
Water Based ◽  
Fluid Properties ◽  
External Forces ◽  
Cuttings Bed

The cuttings transport efficiency of various drilling fluids has been studied in several approaches. This is an important aspect, since hole cleaning is often a bottleneck in well construction. The studies so far have targeted the drilling fluid cuttings’ transport capability through experiments, simulations or field data. Observed differences in the efficiency due to changes in the drilling fluid properties and compositions have been reported but not always fully understood. In this study, the cuttings bed, wetted with a single drilling fluid, was evaluated. The experiments were performed with parallel plates in an Anton Paar Physica 301 rheometer. The results showed systematic differences in the internal friction behaviors between tests of beds with oil-based and beds with water-based fluids. The observations indicated that cutting beds wetted with a polymeric water-based fluid released clusters of particles when external forces overcame the bonding forces and the beds started to break up. Similarly, it was observed that an oil-based fluid wetted bed allowed particles to break free as single particles. These findings may explain the observed differences in previous cutting transport studies.

Sign in / Sign up

Export Citation Format

Share Document