Studies on the materials and manufacturing technology of the murals unearthed at Shimao Site in Shenmu County, Shaanxi

2017 ◽  
Vol 17 (1) ◽  
pp. 193-200
Author(s):  
Anding Shao ◽  
Qianli Fu ◽  
Zhouyong Sun ◽  
Jing Shao

AbstractThis paper presents preliminary scientific analytical results and discussion on the murals unearthed at the Shimao Site in Shenmu County, Shaanxi Province. The murals were composed of pigment layer, plaster base layer and daub layer. The pigments used include hematite, goethite, glauconite and carbon black. Same with the floor plaster layer of the house foundations in the site, the plaster layer of murals is made of calcium carbonate. For the painting procedure, a draft had firstly been designed by engraved lines, and then the murals were painted with various pigments. A tentative comparative study shows that the manufacturing technology and painting techniques of the Shimao mural are similar to that of the murals of the Han and Tang Dynasties. It indicates that the fundamental manufacturing technology of mural had probably been established in the Erlitou Period at latest, which was just followed and enriched over the Han and Tang Dynasties.

2017 ◽  
Vol 744 ◽  
pp. 282-287
Author(s):  
Sarawut Prasertsri ◽  
Sansanee Srichan

This research aimed to develop the formulation of natural rubber filled with carbon black, silica and calcium carbonate for rubber calf nipple application. The reverse engineering was performed on the calf nipple product to analyze the rubber type and component by using Soxhlet extraction, thermogravimetric analysis (TGA) and Fourier transform infrared spectroscopy (FTIR) techniques. Furthermore, mechanical properties were examined to act as benchmark for the rubber compound design. The results showed that rubber component in the nipple product was natural rubber, whereas two filler types revealed as carbon black and calcium carbonate with 10 and 35 of the total weight. In addition, rubber nipple showed the hardness of 46±1 Shore A and tensile strength of 5.3±0.60 MPa. From the investigation of the properties of developed rubber compounds in this work, it was found that the mechanical properties depended on type and content of filler. The required mechanical properties of vulcanizates were achieved at 20 phr of carbon black (N330), 20 phr of silica and 120 phr of calcium carbonate.


1991 ◽  
Vol 6 (3) ◽  
pp. 170-175 ◽  
Author(s):  
K. Schaefer ◽  
J. Scheer ◽  
G. Asmus ◽  
E. Umlauf ◽  
J. Hagemann ◽  
...  

1994 ◽  
Vol 67 (8) ◽  
pp. 570-575
Author(s):  
Norio TSUBOKAWA ◽  
Yukio SHIRAI ◽  
Kazuyo SENO

Sign in / Sign up

Export Citation Format

Share Document