Modeling of lime production process using artificial neural network

2021 ◽  
Vol 0 (0) ◽  
Author(s):  
Abolghasem Daeichian ◽  
Rana Shahramfar ◽  
Elham Heidari
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Production Process ◽  
High Energy ◽  
Ann Model ◽  
Artificial Neural ◽  
Rotary Kilns ◽  
Input Variables ◽  
Artificial Neural Network Ann ◽  
Lime Production

Abstract Lime is a significant material in many industrial processes, including steelmaking by blast furnace. Lime production through rotary kilns is a standard method in industries, yet it has depreciation, high energy consumption, and environmental pollution. A model of the lime production process can help to not only increase our knowledge and awareness but also can help reduce its disadvantages. This paper presents a black-box model by Artificial Neural Network (ANN) for the lime production process considering pre-heater, rotary kiln, and cooler parameters. To this end, actual data are collected from Zobahan Isfahan Steel Company, Iran, which consists of 746 data obtained in a duration of one year. The proposed model considers 23 input variables, predicting the amount of produced lime as an output variable. The ANN parameters such as number of hidden layers, number of neurons in each layer, activation functions, and training algorithm are optimized. Then, the sensitivity of the optimum model to the input variables is investigated. Top-three input variables are selected on the basis of one-group sensitivity analysis and their interactions are studied. Finally, an ANN model is developed considering the top-three most effective input variables. The mean square error of the proposed models with 23 and 3 inputs are equal to 0.000693 and 0.004061, respectively, which shows a high prediction capability of the two proposed models.

scholarly journals Modeling the concentration of carbonyl of ethylene propylene diene monomer during the thermal aging using artificial neural network

2021 ◽  
Vol 03 (01) ◽  
pp. 45-52
Author(s):  
Hadjira Maouz ◽  
◽  
Asma Adda ◽  
Salah Hanini ◽  
◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Thermal Aging ◽  
Training Data ◽  
Ethylene Propylene Diene Monomer ◽  
Ann Model ◽  
Ethylene Propylene ◽  
Artificial Neural ◽  
Input Variables ◽  
Artificial Neural Network Ann

The concentration of carbonyl is one of the most important properties contributing to the detection of the thermal aging of polymer ethylene propylene diene monomer (EPDM). In this publication, an artificial neural network (ANN) model was developed to predict concentration of carbenyl during the thermal aging of EPDM using a database consisting of seven input variables. The best fitting training data was obtained with the architecture of (7 inputs neurons, 10 hidden neurons and 1 output neuron). A Levenberg Marquardt learning (LM) algorithm, hyperbolic tangent transfer function were used at the hidden and output layer respectively. The optimal ANN was obtained with a high correlation coefficient R= 0.995 and a very low root mean square error RMSE = 0.0148 mol/l during the generalization phase. The comparison between the experimental and calculated results show that the ANN model is able of predicted the concentration of carbonyl during the thermal aging of ethylene propylene diene monomer

Monitoring-System Development of Gillnet Using Artificial Neural Network

2020 ◽  
Author(s):  
Chungkuk Jin ◽  
HanSung Kim ◽  
JeongYong Park ◽  
MooHyun Kim ◽  
Kiseon Kim
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Big Data ◽  
Learning Algorithm ◽  
System Development ◽  
Ann Model ◽  
Ann Models ◽  
Artificial Neural ◽  
Input Variables ◽  
Artificial Neural Network Ann

Abstract This paper presents a method for detecting damage to a gillnet based on sensor fusion and the Artificial Neural Network (ANN) model. Time-domain numerical simulations of a slender gillnet were performed under various wave conditions and failure and non-failure scenarios to collect big data used in the ANN model. In training, based on the results of global performance analyses, sea states, accelerations of the net assembly, and displacements of the location buoy were selected as the input variables. The backpropagation learning algorithm was employed in training to maximize damage-detection performance. The output of the ANN model was the identification of the particular location of the damaged net. In testing, big data, which were not used in training, were utilized. Well-trained ANN models detected damage to the net even at sea states that were not included in training with high accuracy.

International Roughness Index Prediction for Rigid Pavements: An Artificial Neural Network Application

2013 ◽  
Vol 723 ◽  
pp. 854-860 ◽  
Author(s):  
Ragaa Abd El-Hakim ◽  
Sherif El-Badawy
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Plain Concrete ◽  
Ride Quality ◽  
Ann Model ◽  
Iri Model ◽  
Roughness Index ◽  
Artificial Neural ◽  
Input Variables ◽  
Artificial Neural Network Ann

nternational Roughness Index (IRI) is an important parameter that indicates the ride quality and pavement condition. In this study, an Artificial Neural Network (ANN) model was developed to predict the IRI for Jointed Plain Concrete Pavement (JPCP) sections. The inputs for this model are: initial IRI value, pavement age, transverse cracking, percent joints spalled, flexible and rigid patching areas, total joint faulting, freezing index, and percent subgrade passing No. 200 U.S. sieve. This data was obtained from the Long Term Pavement Performance (LTPP) Program. It is the same data and inputs used for the development of the Mechanistic-Empirical pavement Design Guide (MEPDG) IRI model for JPCP. The data includes a total of 184 IRI measurements. The results of this study shows that using the same input variables, the ANN model yielded a higher prediction accuracy (coeficint of determination: R2= 0.828, and ratio of standard error of estimate (predicted) to standard deviation of the measured IRI values: Se/Sy=0.414) compared to the MEPDG model (R2= 0.584, Se/Sy=0.643). In addition, the bias in the predicted IRI values using the ANN model was significantly lower compared to the MEPDG regression model.

scholarly journals A novel model for predicting fatty liver disease by means of an artificial neural network

2020 ◽  
Author(s):  
Yi-Shu Chen ◽  
Dan Chen ◽  
Chao Shen ◽  
Ming Chen ◽  
Chao-Hui Jin ◽  
...  
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Liver Disease ◽  
Diagnostic Accuracy ◽  
Fatty Liver ◽  
Fatty Liver Disease ◽  
Health Check ◽  
Ann Model ◽  
Artificial Neural ◽  
Input Variables

Abstract Background The artificial neural network (ANN) emerged recently as a potent diagnostic tool, especially for complicated systemic diseases. This study aimed to establish a diagnostic model for the recognition of fatty liver disease (FLD) by virtue of the ANN. Methods A total of 7,396 pairs of gender- and age-matched subjects who underwent health check-ups at the First Affiliated Hospital, College of Medicine, Zhejiang University (Hangzhou, China) were enrolled to establish the ANN model. Indices available in health check-up reports were utilized as potential input variables. The performance of our model was evaluated through a receiver-operating characteristic (ROC) curve analysis. Other outcome measures included diagnostic accuracy, sensitivity, specificity, Cohen’s k coefficient, Brier score, and Hosmer-Lemeshow test. The Fatty Liver Index (FLI) and the Hepatic Steatosis Index (HSI), retrained using our training-group data with its original designated input variables, were used as comparisons in the capability of FLD diagnosis. Results Eight variables (age, gender, body mass index, alanine aminotransferase, aspartate aminotransferase, uric acid, total triglyceride, and fasting plasma glucose) were eventually adopted as input nodes of the ANN model. By applying a cut-off point of 0.51, the area under ROC curves of our ANN model in predicting FLD in the testing group was 0.908 [95% confidence interval (CI), 0.901–0.915]—significantly higher (P < 0.05) than that of the FLI model (0.881, 95% CI, 0.872–0.891) and that of the HSI model (0.885; 95% CI, 0.877–0.893). Our ANN model exhibited higher diagnostic accuracy, better concordance with ultrasonography results, and superior capability of calibration than the FLI model and the HSI model. Conclusions Our ANN system showed good capability in the diagnosis of FLD. It is anticipated that our ANN model will be of both clinical and epidemiological use in the future.

scholarly journals Penerapan Algoritma Artificial Neural Network untuk Klasifikasi Opini Publik Terhadap Covid-19

2021 ◽  
Vol 5 (2) ◽  
pp. 109-118
Author(s):  
Euis Saraswati ◽  
Yuyun Umaidah ◽  
Apriade Voutama
Keyword(s):  
Neural Network ◽  
Social Media ◽  
Artificial Neural Network ◽  
Text Mining ◽  
Ann Model ◽  
Rapid Spread ◽  
Backpropagation Method ◽  
Artificial Neural ◽  
The Government ◽  
Artificial Neural Network Ann

Coronavirus disease (Covid-19) or commonly called coronavirus. This virus spreads very quickly and even almost infects the whole world, including Indonesia. A large number of cases and the rapid spread of this virus make people worry and even fear the increasing spread of the Covid-19 virus. Information about this virus has also been spread on various social media, one of which is Twitter. Various public opinions regarding the Covid-19 virus are also widely expressed on Twitter. Opinions on a tweet contain positive or negative sentiments. Sentiments of sentiment contained in a tweet can be used as material for consideration and evaluation for the government in dealing with the Covid-19 virus. Based on these problems, a sentiment analysis classification is needed to find out public opinion on the Covid-19 virus. This research uses Artificial Neural Network (ANN) algorithm with the Backpropagation method. The results of this test get 88.62% accuracy, 91.5% precision, and 95.73% recall. The results obtained show that the ANN model is quite good for classifying text mining.

scholarly journals Artificial Neural Network Trained to Predict High-Harmonic Flux

2018 ◽  
Author(s):  
Ana Maria Mihaela Gherman ◽  
Katalin Kovács ◽  
Mircea Vasile Cristea ◽  
Valer Tosa
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
High Harmonic ◽  
Ann Model ◽  
Gas Cell ◽  
Dimensional Parameter ◽  
High Order Harmonic ◽  
Cell Position ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

In this work we present the results obtained with an artificial neural network (ANN) which we trained to predict the expected output of high-order harmonic generation (HHG) process, while exploring a multi-dimensional parameter space. We argue on the utility and efficiency of the ANN model and demonstrate its ability to predict the outcome of HHG simulations. In this case study we present the results for a loose focusing HHG beamline, where the changing parameters are: the laser pulse energy, gas pressure, gas cell position relative to focus and gas cell length. The physical quantity which we predict here using ANN is directly related to the total harmonic yield in a specified spectral domain (20-40 eV). We discuss the versatility and adaptability of the presented method.

scholarly journals A Study on Correlation of Subjects on Electrical Engineering Course Using Artificial Neural Network (ANN)

2021 ◽  
Vol 17 (2) ◽  
pp. 144
Author(s):  
Fathiah Zakaria ◽  
Siti Aishah Che Kar ◽  
Rina Abdullah ◽  
Syila Izawana Ismail ◽  
Nur Idawati Md Enzai
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Electrical Engineering ◽  
Electric Circuit ◽  
Time Correlation ◽  
Ann Model ◽  
Core Subject ◽  
History Of ◽  
Artificial Neural ◽  
Artificial Neural Network Ann

Abstract: This paper presents a study of correlation between subjects of Diploma in Electrical Engineering (Electronics/Power) at Universiti Teknologi MARA(UiTM) Cawangan Terengganu using Artificial Neural Network (ANN). The analysis was done to see the effect of mathematical subjects (Pre-calculus and Calculus 1) and core subject (Electric Circuit 1) on Electronics 1. Electronics 1 is found to be a core subject with the history of high failure rate percentage (more than 25%) in previous semesters. This research has been conducted on current final semester students (Semester 5). Seven (7) models of ANN are developed to observe the correlation between the subjects. In order to develop an ANN model, ANN design and parameters need to be chosen to find the best model. In this study, historical data from students’ database were used for training and testing purpose. Total number of datasets used are 58 sets. 70% of the datasets are used for training process and 30% of the datasets are used for testing process. The Regression Coefficient, (R) values from the developed models was observed and analyzed to see the effect of the subject on the performance of students. It can be proven that Electric Circuit 1 has significant correlation with the Electronics 1 subject respected to the highest R value obtained (0.8100). The result obtained proves that student’s understanding on Electric Circuit 1 subject (taken during semester 2) has direct impact on the performance of students on Electronics 1 subject (taken during semester 3). Hence, early preventive measures could be taken by the respective parties.    Keywords: Artificial neural network, Diploma in Electrical Engineering, Graduate on time, Correlation.

Best Architecture of an Artificial Neural Network to Model Prefilming Airblast Atomization: Not So Deep Learning

2021 ◽  
Author(s):  
Geoffroy Chaussonnet ◽  
Sebastian Gepperth ◽  
Simon Holz ◽  
Rainer Koch ◽  
Hans-Jörg Bauer
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Feature Space ◽  
Middle Layer ◽  
Ann Model ◽  
Deformation Velocity ◽  
The Mean ◽  
Artificial Neural ◽  
Artificial Neural Network Ann ◽  
Domain Of Parameters

Abstract A fully connected Artificial Neural Network (ANN) is used to predict the mean spray characteristics of prefilming airblast atomization. The model is trained from the planar prefilmer experiment from the PhD thesis of Gepperth (2020). The output of the ANN model are the Sauter Mean Diameter, the mean droplet axial velocity, the mean ligament length and the mean ligament deformation velocity. The training database contains 322 different operating points. Two types of model input quantities are investigated and compared. First, nine dimensional parameters are used as inputs for the model. Second, nine non-dimensional groups commonly used for liquid atomization are derived from the first set of inputs. The best architecture is determined after testing over 10000 randomly drawn ANN architectures, with up to 10 layers and up to 128 neurons per layer. The striking results is that for both types of model, the best architectures consist of only 3 hidden layer in the shape of a diabolo. This shape recalls the shape of an autoencoder, where the middle layer would be the feature space of reduced dimensionality. It was found that the model with dimensional input quantities always shows a lower test and validation errors than the one with non-dimensional input quantities. In general, the two types of models provide comparable accuracy, better than typical correlations of SMD and droplet velocity. Finally the extrapolation capability of the models was assessed by a training them on a confined domain of parameters and testing them outside this domain.

Sign in / Sign up

Export Citation Format

Share Document