On the Realization of Second Order Current Mode Active Filters Using Single Differential Voltage Current Conveyor (DVCC)

Frequenz ◽  
2003 ◽  
Vol 57 (5-6) ◽  
Author(s):  
Shahram Minaei
Keyword(s):  
Current Mode ◽  
Second Order ◽  
Current Conveyor ◽  
Active Filters ◽  
Differential Voltage ◽  
Differential Voltage Current Conveyor

scholarly journals Voltage-Mode Universal Biquadratic Filter Using Single DVCC

2013 ◽  
Vol 2013 ◽  
pp. 1-5 ◽  
Author(s):  
Jiun-Wei Horng ◽  
Zih-Yang Jhao
Keyword(s):  
Current Conveyor ◽  
Circuit Topology ◽  
Voltage Mode ◽  
Allpass Filters ◽  
Differential Voltage ◽  
Biquadratic Filter ◽  
Differential Voltage Current Conveyor ◽  
Output Filter

A voltage-mode universal biquadratic filter using a differential voltage current conveyor (DVCC), two capacitors, and two resistors is presented. The proposed circuit has four input terminals and three output terminals and can realize all the standard filter functions, which are lowpass, bandpass, highpass, notch, and allpass filters, without changing the circuit topology. Three simultaneous output filter responses can be obtained from some derived filter types. The proposed circuit employs only one DVCC that simplifies the configuration.

A New Method for Increasing Quality Factor in Active Filters

2017 ◽  
Vol 26 (09) ◽  
pp. 1750140 ◽  
Author(s):  
Abdullah Yesil ◽  
Firat Kacar
Keyword(s):  
Quality Factor ◽  
Intermediate Frequency ◽  
Current Conveyor ◽  
Active Filters ◽  
New Method ◽  
Center Frequency ◽  
Feedback Circuit ◽  
Filter Structure ◽  
Transconductance Amplifier ◽  
Differential Voltage Current Conveyor

In this paper, we present a new method increasing quality factor of active filter structure in the literature and a new designed filter. The new method is easily applied to all different filter modes with the proper feedback circuit. The center frequency of the filter remains constant as quality factor of filter increases. Also, quality factor can be also tuned electronically by changing the biasing current of the feedback circuit. Furthermore, the performance of the method is demonstrated by CMOS simulation of differential voltage current conveyor and transconductance amplifier. Quality factor value of the filter can also be easily adjusted electronically between 1 and 20 with the presented method. Finally, an application example of the presented method is presented for double tuned amplifier for intermediate frequency pre-amplifier of FM receiver.

Differential Voltage Current Conveyor Realization based on CMOS Inverters

2017 ◽  
Vol 7 (2) ◽  
pp. 14
Author(s):  
Pandey Neeta ◽  
Varshney Garima ◽  
Pandey Rajeshwari ◽  
◽  
◽  
...  
Keyword(s):  
Current Conveyor ◽  
Differential Voltage ◽  
Differential Voltage Current Conveyor

scholarly journals VM and CM Universal Filters Based on Single DVCCTA

2011 ◽  
Vol 2011 ◽  
pp. 1-7 ◽  
Author(s):  
Neeta Pandey ◽  
Sajal K. Paul
Keyword(s):  
Building Block ◽  
Current Mode ◽  
Cmos Technology ◽  
Current Conveyor ◽  
Spice Simulation ◽  
Transconductance Amplifier ◽  
Low Sensitivity ◽  
Differential Voltage Current Conveyor ◽  
A Current ◽  
Sensitivity Performance

A universal voltage-mode filter (VM) and a current-mode filter (CM) based on recently proposed active building block, namely, differential voltage current conveyor transconductance amplifier (DVCCTA) are proposed. Both the circuits use a single DVCCTA, two capacitors, and a single resistor. The filters enjoy low-sensitivity performance and low component spread and exhibit electronic tunability of filter parameters via bias currents of DVCCTA. SPICE simulation using 0.25 μm TSMC CMOS technology parameters is included to show the workability of the proposed circuits.

Sign in / Sign up

Export Citation Format

Share Document