scholarly journals The study of structural, elastic, electronic and optical properties of CsYx I(1 − x)(Y = F, Cl, Br) using density functional theory

2017 ◽  
Vol 35 (1) ◽  
pp. 197-210 ◽  
Author(s):  
Shabeer Ahmad Mian ◽  
Muhammad Muzammil ◽  
Gul Rahman ◽  
Ejaz Ahmed

AbstractThe structural, electronic, elastic and optical properties of CsYx I(1 − x)(Y = F, Cl, Br) are investigated using full potential linearized augmented plane wave (FP-LAPW) method within the generalized gradient approximation (GGA). The ground state properties such as lattice constant (ao) and bulk modulus (K) have been calculated. The mechanical properties including Poisson’s ratio (σ), Young’s modulus (E), anisotropy factor (A) and shear modulus (G) were also calculated. The results of these calculations are comparable with the reported experimental and theoretical values. The ductility of CsYx I(1 − x) was analyzed using Pugh’s rule (B/G ratio) and Cauchy’s pressure (C12−C44). Our results revealed that CsF is the most ductile among the CsYxI(1 − x)(Y = F, Cl, Br) compounds. The incremental addition of lighter halogens (Yx) slightly weakens the strength of ionic bond in CsYxI(1 − x). Moreover, the optical transitions were found to be direct for binary and ternary CsYxI(1 − x). We hope that this study will be helpful in designing binary and ternary Cs halides for optoelectronic applications.

SPIN ◽  
2021 ◽  
pp. 2150012
Author(s):  
W. Benosmane ◽  
S. Benatmane ◽  
R. Bentata ◽  
W. Benstaali

The structural electronic and magnetic properties of the double perovskite Ca2CrNbO6 in the cubic structure are investigated using the empirical full-potential linearized augmented plane wave (FP-LAPW) method within the framework of the spin-polarized density functional theory (DFT). These properties are calculated using the Generalized Gradient Approximation (GGA), [Formula: see text] and modified Becke–Johnson mBJ-GGA. In addition, the real and imaginary parts of the optical dielectric function and the reflectivity, and the refractive spectra are computed and the main features shown by their spectra are ascertained on the base of the investigation of density of states.


Author(s):  
Afiq Radzwan ◽  
Rashid Ahmed ◽  
Amiruddin Shaari ◽  
Abdullahi Lawal ◽  
Ying Xuan Ng

The structural, electronic and optical  properties of Sb2S3 have been investigated  using full-potential linearized augmented plane wave method within density functional theory (DFT) framework, treating exchange-correlation potential with Engel-Vosko generalized gradient approximation (EV-GGA). Electronic properties calculations were performed  with and without taken into account the effects of spin-orbit coupling (SOC) . From our results we found that structural properties,density of states and band structure are in good agreement with experimental results.The effects of SOC and relativistic on electronic properties were found to be negligible. However, optical properties, namely, imaginary and real parts of dielectric function, reflectivity, absorption coefficient, refractive index, extinction coefficient and energy loss function were calculated and analyized.Optical gap of 1.61 eV proves that Sb2S3 metal chalcogenides is a promising material for solar cell device.


2019 ◽  
Vol 9 (3) ◽  
pp. 199-211
Author(s):  
Mohammed Ait Haddouch ◽  
Youssef Tamraoui ◽  
Fatima-Ezzahra Mirinioui ◽  
Youssef Aharbil ◽  
Hicham Labrim ◽  
...  

A series of strontium calcium tungstates Sr1-xCaxWO4 powders with (x = 0; 0.25; 0.5; 0.75 and 1.0) were prepared by solid-state reaction method and analyzed by X-ray diffraction (XRD). All these compositions possess a tetragonal scheelite structure with I41/a space group. Raman active vibrational modes in the range from 20 to 1000 cm-1 of the series Sr1-xCaxWO4 with tetragonal structure exhibit 13 modes in arrangement with the Group theory analysis of structural Raman-active modes. The optical properties were investigated using the diffuse reflectance UV–visible absorbance spectrum. Based on Density Functional Theory (DFT) and using full Potential-linearized Augmented Plane Wave (FP-LAPW) method with the Local Density Approximation and the Generalized Gradient Approximation (GGA), implemented in the Wien2k package, we have investigated electronic and optical properties of all the compositions. The results indicate a decrease in the values of the optical direct bandgap (from 4.29 to 3.87 eV) with the increase of Ca into SrWO4 lattice, which is in good agreement with our experimental results.


2021 ◽  
Author(s):  
Abdelmajid Kadiri ◽  
Mestapha Arejdal ◽  
Abderrahman Abbassi

Abstract In this present paper, the electronic, magnetic and optical properties of the double Perovskites Ba2MUO6 with (M=Ni, Co, Cd and Zn) are investigated in the framework of the Generalized Gradient Approximation (GGA), employing the Full Potential-Linearized Augmented Plane Wave (FP-LAPW) method as implemented in the Wien2K package. The only method used to study these three types of the properties of these compounds is Density Functional Theory (DFT) approach. Thanks to this method, several of the detailed results related to the three studied properties of these compounds are determined; specifically, the optimization of parameters of structures, the band structures, the electronic densities of states (DOS), reflectivity, transmittance and absorbance. Finally, the comparison between these results obtained in this theoretical study and the experimental values makes it clear that they are virtually in good agreement with each other.


2018 ◽  
Vol 32 (11) ◽  
pp. 1850129 ◽  
Author(s):  
Shahram Yalameha ◽  
Aminollah Vaez

In this paper, thermodynamic and elastic properties of the AlNi and AlNi3 were investigated using density functional theory (DFT). The full-potential linearized augmented plane-wave (APW) in the framework of the generalized gradient approximation as used as implemented in the Wien2k package. The temperature dependence of thermal expansion coefficient, bulk modulus and heat capacity in a wide range of temperature (0–1600 K) were investigated. The calculated elastic properties of the compounds show that both intermetallic compounds of AlNi and AlNi3 have surprisingly negative Poisson’s ratio (NPR). The results were compared with other experimental and computational data.


Author(s):  
Deepika Shrivastava ◽  
Sankar P. Sanyal

The structural, electronic and elastic properties of CeTl with CsCl-type B2 structure have been investigated using full-potential linearized augmented plane wave (FP-LAPW) method based on density functional theory (DFT) within the generalized gradient approximation (GGA) for exchange and correlation potential. The ground state properties such as lattice constant, bulk modulus and pressure derivative of bulk modulus have been calculated which are in good agreement with available experimental data. The band structure and density of state depict that 4f electrons of Ce element have dominant character in electronic conduction and are responsible for metallic character of CeTl. The charge density plot reveals that the metallic as well as ionic bonding exist between Ce and Tl atoms. The calculated elastic constants indicate that CeTl is mechanically stable in cubic B2 phase and found to be ductile in nature.


2019 ◽  
Vol 297 ◽  
pp. 120-130 ◽  
Author(s):  
Abdelhakim Chadli ◽  
Mohamed Halit ◽  
Brahim Lagoun ◽  
Ferhat Mohamedi ◽  
Said Maabed ◽  
...  

The structural, elastic and anisotropic properties for rare earth manganites compound YMnO3 in ferromagnetic state with hexagonal structure, have been investigated using the ab initio calculations based on the density functional theory, this calculations were based on the full potential linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA). The agreement of the DFT (FP-LAPW) calculations including internal atomic relaxations, with the experimental data is very good. Other relevant quantities such as elastic constants, shear modulus, Young’s modulus, Poisson’s ratio, anisotropy factors, sound velocity, and Debye temperature have been calculated and discussed.


2001 ◽  
Vol 691 ◽  
Author(s):  
Daniel I Bilc ◽  
Paul Larson ◽  
S.D. Mahanti ◽  
M.G. Kanatzidis

ABSTRACTK2Bi8 Se13 belongs to a class of complex Bi-Te-Se systems which show great potential for thermoelectric performance. This compound forms in two distinct phases α-K2Bi8 Se13 (triclinic with space group P-1) and β-K2Bi8 Se13 (monoclinic with space group P 21/m). In the β-phase, there is substantial disorder at four sites in the unit cell, occupied by two K and two Bi atoms. To understand the electronic properties of these two different phases we have carried out band structure calculations within ab initio density functional theory (DFT) using full potential linearized augmented plane wave (LAPW) method. The generalized gradient approximation (GGA) was used to treat the exchange and correlation potential. Spin-orbit interaction (SOI) was incorporated using a second variational procedure. The α. phase is found to be a semiconductor with an indirect band gap of 0.47eV. For the β-phase we have chosen two different ordered structures. The system is a semi-metal for one of the structures whereas for the other, it is a narrow gap semiconductor with a gap of 0.38eV in the absence of SOI, but the gap collapses and the system becomes a semimetal with low density of states at the Fermi energy when SOI is included.


2014 ◽  
Vol 894 ◽  
pp. 254-258
Author(s):  
Rong Zhen Chen ◽  
Clas Persson

In this work, the electronic structure and dielectric function of chalcopyrite CuInSe2 are presented. The results are based on the full-potential linearized augmented plane wave (FPLAPW) method using the generalized gradient approximation (GGA) plus an onsite Coulomb interaction U of the Cu d states. The dielectric constant, absorption coefficient and refractive index are explored by means of optical response. The spin-orbit coupling effect is considered for the calculations of electronic structure and optical properties. We find that the results based on our calculation method have good agreement compared with experimental and other earlier simulations results.


2010 ◽  
Vol 638-642 ◽  
pp. 3319-3324 ◽  
Author(s):  
Jae Hoon Jang ◽  
In Gee Kim ◽  
H.K.D.H. Bhadeshia

Thermodynamic data for the substitution of silicon and manganese in cementite have been estimated using first-principles methods in order to aid the design of steels where it is necessary to control the precipitation of this phase. The need for the calculations arises from the fact that for silicon the data cannot be measured experimentally; manganese is included in the analysis to allow a comparison with its known behaviour. The calculations for Fe3C, (Fe11Si4c)C4, (Fe11Si8d)C4, (Fe11Mn4c)C4 and (Fe11Mn8d)C4 are based on the total energy all-electron full-potential linearized augmented plane-wave method within the generalized gradient approximation to density functional theory. The output includes the ground state lattice constants, atomic positions and bulk moduli. It is found that (Fe11Si4c)C4 and (Fe11Si8d)C4 have about 52 and 37 kJ greater formation energy when compared with a mole of unit cells of pure cementite, whereas the corresponding energy for (Fe11Mn4c)C4 and (Fe11Mn8d)C4 is less by about 5 kJ mol1. These results for manganese match closely with published trends and data; a similar comparison is not possible for silicon but we correctly predict that the solubility in cementite should be minimal.


Sign in / Sign up

Export Citation Format

Share Document