Preparation and characterization of nano biphasic calcium phosphate/poly-L-lactide composite scaffold

2016 ◽  
Vol 23 (1) ◽  
pp. 37-44 ◽  
Author(s):  
Weizhong Yang ◽  
Yong Yi ◽  
Yuan Ma ◽  
Li Zhang ◽  
Jianwen Gu ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Cell Viability ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate ◽  
Composite Scaffold ◽  
Pore Wall ◽  
Tissue Engineering Scaffold ◽  
Plla Scaffold

AbstractNano biphasic calcium phosphate (BCP) particles were synthesized using the sol-gel method. As-prepared BCP particles were combined with poly-L-lactide (PLLA) to fabricate nano-BCP/PLLA composite scaffold through a series of processing steps containing solvent self-diffusion, hot-pressing, and particulate leaching. The composite had a suitable porous structure for bone tissue engineering scaffold. In comparison, micro-BCP/PLLA scaffold was studied as well. Nano-BCP particles were distributed homogeneously in the PLLA matrix, and much more tiny crystallites exposed on the surface of the pore wall. Due to the finer inorganic particle distribution in the PLLA phase and the larger area of the bioactive phase exposed in the pore wall surface, nano-BCP/PLLA scaffold had enhanced compressive strength, good bioactivity, and superior cell viability. A nonstoichiometric apatite layer could be rapidly formed on the surface of nano- BCP/PLLA when soaked in simulated body fluid. The MG-63 cell viability of nano-BCP/PLLA scaffold is significantly higher than that of micro-BCP/PLLA scaffold. Therefore, nano-BCP/PLLA composite may be a suitable alternative for bone tissue engineering scaffold.

scholarly journals Fabrication and Characterization of Biodegradable Gelatin Methacrylate/Biphasic Calcium Phosphate Composite Hydrogel for Bone Tissue Engineering

Nanomaterials ◽  
2021 ◽  
Vol 11 (3) ◽  
pp. 617
Author(s):  
Ji-Bong Choi ◽  
Yu-Kyoung Kim ◽  
Seon-Mi Byeon ◽  
Jung-Eun Park ◽  
Tae-Sung Bae ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Cell Viability ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Tricalcium Phosphate ◽  
Biphasic Calcium Phosphate ◽  
Composite Hydrogel ◽  
Beta Tricalcium Phosphate ◽  
High Bone

In the field of bone tissue, maintaining adequate mechanical strength and tissue volume is an important part. Recently, biphasic calcium phosphate (BCP) was fabricated to solve the shortcomings of hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP), and it is widely studied in the field of bone-tissue engineering. In this study, a composite hydrogel was fabricated by applying BCP to gelatin methacrylate (GelMA). It was tested by using a mechanical tester, to characterize the mechanical properties of the prepared composite hydrogel. The fabricated BCP was analyzed through FTIR and XRD. As a result, a different characteristic pattern from hydroxyapatite (HA) and beta-tricalcium phosphate (β-TCP) was observed, and it was confirmed that it was successfully bound to the hydrogel. Then, the proliferation and differentiation of preosteoblasts were checked to evaluate cell viability. The analysis results showed high cell viability and relatively high bone differentiation ability in the composite hydrogel to which BCP was applied. These features have been shown to be beneficial for bone regeneration by maintaining the volume and shape of the hydrogel. In addition, hydrogels can be advantageous for clinical use, as they can shape the structure of the material for custom applications.

Effect of zirconia-mullite incorporated biphasic calcium phosphate/biopolymer composite scaffolds for bone tissue engineering

2020 ◽  
Vol 6 (5) ◽  
pp. 055004
Author(s):  
Tanawut Rittidach ◽  
Tanatsaparn Tithito ◽  
Panan Suntornsaratoon ◽  
Narattaphol Charoenphandhu ◽  
Jirawan Thongbunchoo ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate ◽  
Composite Scaffolds

Fully Interconnected Globular Porous Biphasic Calcium Phosphate Ceramic Scaffold Facilitates Osteogenic Repair

2007 ◽  
Vol 361-363 ◽  
pp. 119-122 ◽  
Author(s):  
J.H. Lim ◽  
J.H. Park ◽  
Eui Kyun Park ◽  
Hae Jung Kim ◽  
Il Kyu Park ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Bone Substitute ◽  
Biphasic Calcium Phosphate ◽  
Bone Defects ◽  
Calcium Phosphate Ceramic ◽  
Ceramic Scaffold ◽  
Porous Biphasic Calcium Phosphate

An appropriate scaffold, which provides structural support for transplanted cells and acts as a vehicle for the delivery of biologically active molecules, is critical for tissue engineering. We developed a fully interconnected globular porous biphasic calcium phosphate ceramic scaffold by adopting a foaming method, and evaluated its efficiency as a bone substitute and a scaffold for bone tissue engineering by in vitro and in vivo biocompatible analysis and its osteogenic healing capacity in rat tibial bone defects. They have spherical pores averaging 400um in diameter and interconnecting interpores averaging 70um in diameter with average 85% porosity. They elicited no cytotoxicity and noxious effect on cellular proliferation and osteoblastic differentiation during the cell-scaffold construct formation. Also the bone defects grafted with fully interconnected globular porous biphasic calcium phosphate ceramic blocks revealed excellent bone healing within 3 weeks. These findings suggest that the fully interconnected porous biphasic calcium phosphate scaffold formed by the foaming method can be a promising bone substitute and a scaffold for bone tissue engineering.

Evaluation of Chitosan/Biphasic Calcium Phosphate Scaffolds for Maxillofacial Bone Tissue Engineering

2008 ◽  
Vol 269 (1) ◽  
pp. 100-105 ◽  
Author(s):  
Aylin Sendemir Urkmez ◽  
Sherrie G. Clark ◽  
Matthew B. Wheeler ◽  
Michael S. Goldwasser ◽  
Russell D. Jamison
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate

scholarly journals Biphasic calcium phosphate–casein bone graft fortified with Cassia occidentalis for bone tissue engineering and regeneration

2015 ◽  
Vol 38 (1) ◽  
pp. 259-266 ◽  
Author(s):  
B SANTHOSH KUMAR ◽  
T HEMALATHA ◽  
R DEEPACHITRA ◽  
R NARASIMHA RAGHAVAN ◽  
P PRABU ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Bone Graft ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate ◽  
Cassia Occidentalis

Preparation of Porous Biphasic Calcium Phosphate-Gelatin Nanocomposite for Bone Tissue Engineering

2010 ◽  
Vol 11 ◽  
pp. 67-72 ◽  
Author(s):  
L. Bakhtiari ◽  
Hamid Reza Rezaie ◽  
S.M. Hosseinalipour ◽  
Mohammad A. Shokrgozar
Keyword(s):  
Tissue Engineering ◽  
Calcium Phosphate ◽  
Porous Structure ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Biphasic Calcium Phosphate ◽  
Bending Strength ◽  
Cell Viability Assay ◽  
Hydroxy Apatite ◽  
Porous Nanocomposite

A new porous structure as a bone tissue engineering scaffold was developed by a freeze-drying method. The porous nanocomposite was prepared from Biphasic Calcium Phosphate (BCP) which was a mixture of 70% hydroxy apatite and 30%ß-TCP (ß-Tricalcium Phosphate). Porogen was naphthalene and gelatin from bovine skin type B was used as polymer. Gelatin was stabilized with EDC (N-(3-dimethyl aminopropyl)-N´-ethyl carbodiimide hydrochloride) by a cross-linking method. The scaffold was characterized by scanning electronic microscope (SEM), Fourier-Transformed Infrared spectroscopy (FTIR). The biocompatibility of this nanocomposite carried out through MTT (3-(4, 5-Dimethylthiazol-2-yl)-2, 5-diphenyltetrazolium bromide, a tetrazole) cell viability assay. Also other properties of scaffold such as morphology, grain size, bending strength were investigated. Highly porous structure with interconnected porosities, good mechanical behavior and high biocompatibility with bone tissue, were benefits of this porous nanocomposite for bone tissue engineering.

Fabrication and characterization of electrospinning/3D printing bone tissue engineering scaffold

RSC Advances ◽  
2016 ◽  
Vol 6 (112) ◽  
pp. 110557-110565 ◽  
Author(s):  
Yinxian Yu ◽  
Sha Hua ◽  
Mengkai Yang ◽  
Zeze Fu ◽  
Songsong Teng ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tissue Engineering ◽  
3D Printing ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Composite Scaffold ◽  
Tissue Engineering Scaffold ◽  
Fabrication And Characterization

A composite scaffold was fabricated with a method involving both electrospinning and 3D printing to give microscale pores and good mechanical properties. Biocompatibility and cell infiltration on the scaffold was evaluated by an in vitro study.

scholarly journals Carbon nanotube reinforced polyvinyl alcohol/biphasic calcium phosphate scaffold for bone tissue engineering

RSC Advances ◽  
2019 ◽  
Vol 9 (67) ◽  
pp. 38998-39010 ◽  
Author(s):  
Weiwei Lan ◽  
Xiumei Zhang ◽  
Mengjie Xu ◽  
Liqin Zhao ◽  
Di Huang ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Carbon Nanotube ◽  
Calcium Phosphate ◽  
Polyvinyl Alcohol ◽  
Bone Tissue Engineering ◽  
Bone Tissue ◽  
Porous Carbon ◽  
Biphasic Calcium Phosphate ◽  
Freeze Drying ◽  
Drying Method

In this paper, a well-developed porous carbon nanotube (CNT) reinforced polyvinyl alcohol/biphasic calcium phosphate (PVA/BCP) scaffold was fabricated by a freeze-thawing and freeze-drying method.

Sign in / Sign up

Export Citation Format

Share Document