Exploring the Photovoltaic Properties of Metal Bipyridine Complexes (Metal = Fe, Zn, Cr, and Ru) by Density Functional Theory

2018 ◽  
Vol 73 (4) ◽  
pp. 337-344 ◽  
Author(s):  
Ahmad Irfan ◽  
Ghulam Abbas
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Photovoltaic Performance ◽  
Open Circuit ◽  
Band Alignment ◽  
Structure Property ◽  
Ambient Conditions ◽  
Photovoltaic Properties ◽  
Functional Theory ◽  
Solar Cell Performance

AbstractThe synthesis and characterisation of mononuclear Fe complexes were carried out by using bipyridine (Compound 1) at ambient conditions. Additionally, three more derivatives were designed by substituting the central Fe metal with Zn, Cr, and Ru (Compound 2, Compound 3, and Compound 4), respectively. The ground state geometry calculations were carried out by using density functional theory (DFT) at B3LYP/6-31G** (LANL2DZ) level of theory. We shed light on the frontier molecular orbitals, electronic properties, photovoltaic parameters, and structure–property relationship. The open-circuit voltage is a promising parameter that considerably affects the photovoltaic performance; thus, we have estimated its value by considering the complexes as donors whereas TiO2 and/or Si were used as acceptors. The solar cell performance behaviour was also studied by shedding light on the band alignment and energy level offset.

scholarly journals Structure–Property Relationships in Transition Metal Dichalcogenide Bilayers under Biaxial Strains

Nanomaterials ◽  
2021 ◽  
Vol 11 (10) ◽  
pp. 2639
Author(s):  
Pingping Jiang ◽  
Pascal Boulet ◽  
Marie-Christine Record
Keyword(s):  
Density Functional ◽  
Compressive Strain ◽  
Bond Critical Point ◽  
Transition Metal Dichalcogenide ◽  
Structure Property ◽  
Photovoltaic Properties ◽  
Functional Theory ◽  
Leading Role ◽  
Structure Property Relationships

This paper reports a Density Functional Theory (DFT) investigation of the electron density and optoelectronic properties of two-dimensional (2D) MX2 (M = Mo, W and X = S, Se, Te) subjected to biaxial strains. Upon strains ranging from −4% (compressive strain) to +4% (tensile strain), MX2 bilayers keep the same bandgap type but undergo a non-symmetrical evolution of bandgap energies and corresponding effective masses of charge carriers (m*). Despite a consistency regarding the electronic properties of Mo- and WX2 for a given X, the strain-induced bandgap shrinkage and m* lowering are strong enough to alter the strain-free sequence MTe2, MSe2, MS2, thus tailoring the photovoltaic properties, which are found to be direction dependent. Based on the quantum theory of atoms in molecules, the bond degree (BD) at the bond critical points was determined. Under strain, the X-X BD decreases linearly as X atomic number increases. However, the kinetic energy per electron G/ρ at the bond critical point is independent of strains with the lowest values for X = Te, which can be related to the highest polarizability evidenced from the dielectric properties. A cubic relationship between the absolute BD summation of M-X and X-X bonds and the static relative permittivity was observed. The dominant position of X-X bond participating in this cubic relationship in the absence of strain was substantially reinforced in the presence of strain, yielding the leading role of the X-X bond instead of the M-X one in the photovoltaic response of 2D MX2 material.

scholarly journals Ab initio study of elastic anisotropies and thermal conductivities of rhenium diborides in different crystal structures

RSC Advances ◽  
2020 ◽  
Vol 10 (61) ◽  
pp. 37142-37152
Author(s):  
Yi X. Wang ◽  
Ying Y. Liu ◽  
Zheng X. Yan ◽  
W. Liu ◽  
Jian B. Gu
Keyword(s):  
Density Functional Theory ◽  
Ab Initio ◽  
Crystal Structures ◽  
Density Functional ◽  
Density Functional Theory Calculations ◽  
Ab Initio Study ◽  
Ambient Conditions ◽  
Functional Theory ◽  
Thermal Conductivities

The phase stabilities, elastic anisotropies, and thermal conductivities of ReB2 diborides under ambient conditions have been investigated by using density functional theory calculations.

scholarly journals Light Harvesting and Optical-Electronic Properties of Two Quercitin and Rutin Natural Dyes

2019 ◽  
Vol 9 (12) ◽  
pp. 2567 ◽  
Author(s):  
Dongpeng Zhao ◽  
Qiuchen Lu ◽  
Runzhou Su ◽  
Yuanzuo Li ◽  
Meiyu Zhao
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Fourier Transforms ◽  
Light Harvesting ◽  
Absorption Peak ◽  
Conduction Band Edge ◽  
Photovoltaic Properties ◽  
Functional Theory ◽  
Photoelectric Properties ◽  
Reorganization Energies

The photovoltaic properties of two dyes (quercitin (Q) and rutin (R)) were experimentally investigated. The results showed that Q had excellent photoelectric properties with J s c of 5.480 mA·cm−2, V o c of 0.582 V, η of 2.151% larger than R with J s c of 1.826 mA·cm−2, V o c of 0.547 V, and η of 0.713%. For a better understanding of the photoelectric properties of two molecules and illustrating why the performances of Q is better than R from the micro-level, the UV-VIs spectrum, Fourier transforms infrared (FT-IR) spectrum, and cyclic voltage current characteristics were experimentally investigated. What is more, density functional theory (DFT) and time dependent density functional theory (TD-DFT) have been implemented in theoretical calculation. Based on the calculated results, frontier molecular orbitals (FMOs), charge differential density (CDD), infrared vibration, first hyperpolarizability, projected density orbital analysis (PDOS), electrostatic potential (ESP), and natural bond orbital (NBO) were analyzed. Hole/electron reorganization energies ( λ h / λ e ), light harvesting efficiency (LHE), fluorescent lifetime (τ), absorption peak, and the vertical dipole moment ( μ n o r m a l ) were calculated, and the shift of conduction band edge of a semiconductor (ΔECB) has been analyzed, which has a close relationship with J s c and V o c . The results demonstrated that, due to the higher LHE, τ, μ n o r m a l , and red-shifted absorption peak, Q has better photoelectric properties than R as a promising sensitizer.

Time-dependent vibrational spectral analysis of first principles trajectory of methylamine with wavelet transform

2017 ◽  
Vol 19 (15) ◽  
pp. 9912-9922 ◽  
Author(s):  
Sohag Biswas ◽  
Bhabani S. Mallik
Keyword(s):  
Molecular Dynamics ◽  
Density Functional Theory ◽  
Spectral Analysis ◽  
First Principles ◽  
Density Functional ◽  
Time Dependent ◽  
Amine Group ◽  
Ambient Conditions ◽  
Functional Theory ◽  
Fluctuation Dynamics

The fluctuation dynamics of amine stretching frequencies, hydrogen bonds, dangling N–D bonds, and the orientation profile of the amine group of methylamine (MA) were investigated under ambient conditions by means of dispersion-corrected density functional theory-based first principles molecular dynamics (FPMD) simulations.

scholarly journals Ferroelectric fatigue in layered perovskites from self-energy corrected density functional theory

RSC Advances ◽  
2017 ◽  
Vol 7 (35) ◽  
pp. 21856-21868 ◽  
Author(s):  
Kan-Hao Xue ◽  
Leonardo R. C. Fonseca ◽  
Xiang-Shui Miao
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Bismuth Titanate ◽  
Band Alignment ◽  
Layered Perovskite ◽  
Functional Theory ◽  
Self Energy ◽  
Layered Perovskites

We employed GGA-1/2 to investigate the band alignment between platinum and various layered perovskite Aurivillius ferroelectrics. A model is proposed for ferroelectric fatigue in bismuth titanate based on our calculation.

scholarly journals Enhancing the Light Harvesting Efficiency, Open Circuit Voltage And Stability of Molybdenum Doped (Zno)6 Nanocluster in Dye-Sensitized Solar Cells: A DFT Study

2018 ◽  
Vol 34 (5) ◽  
pp. 2292-2304
Author(s):  
S. Dheivamalar ◽  
K. Bansura banu
Keyword(s):  
Density Functional Theory ◽  
Density Functional ◽  
Open Circuit Voltage ◽  
Dye Sensitized Solar Cells ◽  
Open Circuit ◽  
Functional Theory ◽  
Dye Sensitized ◽  
Harvesting Efficiency ◽  
Light Harvesting Efficiency ◽  
Sensitized Solar Cells

In this study, the electronic and structural properties of drum structured Mo-doped Zn6O6 (MoZn5O6) cluster as the π conjugated bridging in the dye-sensitized solar cells (DSSC) were compared with its pristine form by density functional theory (DFT) calculations under Gaussian 09 Program. The frontier molecular orbital study was explored to determine the charge transport characteristics of donor-acceptor moieties over the entire visible range and the electron injection from the valence band (LUMO) orbital to the conduction band (HOMO) orbital of MoZn5O6. The energy gap (Eg), binding energy (EB), global reactivity descriptors, thermodynamic parameters and the dipole moment were also calculated for MoZn5O6 and compared with Zn6O6. The density of states (DOS) of MoZn5O6 material was investigated to demonstrate the importance of d orbital of Mo atom in hybridization. To examine the charge distribution, Mulliken atomic charge distribution and molecular electrostatic potential (MEP) were analyzed. A spectroscopic study was included for the better perception of the interaction of Mo with Zn6O6 cluster. The increased value of the first-order hyperpolarizability of MoZn5O6 from its pure clustermanifests the MoZn5O6 is a better candidate with the superior nonlinear optical property. The analysis of UV-Vis spectra through the time-dependent density functional theory (TD-DFT) discovers that the MoZn5O6 has larger light harvesting efficiency (LHE) which influences the higher photon to current conversion efficiency. As a result, the valence band (LUMO) of MoZn5O6 is intense than the conduction band (HOMO) of MoZn5O6 making an increase in the open circuit voltage (VOC) and hence it confirms that the MoZn5O6 material can be a used in photovoltaic applications.

Sign in / Sign up

Export Citation Format

Share Document