Parametric Instability of a Rotating Axially Loaded FG Cylindrical Thin Shell Under Both Axial Disturbances and Thermal Effects

2018 ◽  
Vol 73 (12) ◽  
pp. 1105-1119
Author(s):  
X. Li ◽  
Q. Xu ◽  
Y.H. Li
Keyword(s):  
Boundary Conditions ◽  
Thin Shell ◽  
Thermal Environment ◽  
Parametric Instability ◽  
Rotation Velocity ◽  
Functionally Graded ◽  
Angular Rotation ◽  
Various Boundary Conditions ◽  
Love’S Thin Shell Theory ◽  
The Stability

AbstractParametric instability of a rotating functionally graded (FG) cylindrical thin shell with axial compression under various boundary conditions is studied in this article. In particular, the shell is subjected to both axial periodic displacement disturbances and a thermal environment. The initial hoop tension and Coriolis effects due to rotation are also considered. The coupled dynamic equations of the shell under multiple conditions are formulated based on Love’s thin-shell theory. The instability boundaries of the shell with different boundary conditions considering thermal factors, axial disturbances, and other system parameters are obtained analytically under the case of primary and combination resonance; numerical illustrations are also given. It is found that high temperature weakens the stability of the system, while axial disturbances show stronger influence on the instability regions of the shell compared to other parameters such as thermal factors and the angular rotation velocity.

Static Analysis of Moderately Thick Functionally Graded Plates With Various Boundary Conditions

2010 ◽  
Author(s):  
Nastaran Shahmansouri ◽  
Mohammad Mohammadi Aghdam ◽  
Kasra Bigdeli
Keyword(s):  
Boundary Conditions ◽  
Volume Fraction ◽  
Closed Form Solution ◽  
Shear Deformation Theory ◽  
Functionally Graded ◽  
Rectangular Plates ◽  
Functionally Graded Plates ◽  
Various Boundary Conditions ◽  
Fg Plates ◽  
Ode Systems

The present study investigates static analyses of moderately thick FG plates. Using the First Order Shear Deformation Theory (FSDT), functionally graded plates subjected to transversely distributed loading with various boundary conditions are studied. Effective mechanical properties which vary from one surface of the plate to the other assumed to be defined by a power law form of distribution. Different ceramic-metal sets of materials are studied. Solution of the governing equations, including five equilibrium and eight constitutive equations, is obtained by the Extended Kantorovich Method (EKM). The system of thirteen Partial Differential Equations (PDEs) in terms of displacements, rotations, force and moment resultants are considered as multiplications of separable function of independent variables x and y. Then by successful utilization of the EKM these equations are converted to a double set of ODE systems in terms of x and y. The obtained ODE systems are then solved iteratively until final convergence is achieved. Closed form solution is presented for these ODE sets. It is shown that the method is very stable and provides fast convergence and highly accurate predictions for both thin and moderately thick plates. Comparison of the normal stresses at various points of rectangular plates and deflection of mid-point of the plate are presented and compared with available data in the literature. The effects of the volume fraction exponent n on the behavior of the normalized deflection, moment resultants and stresses of FG plates are also studied. To validate data for analysis fully clamped FG plates, another analysis was carried out using finite element code ANSYS. Close agreement is observed between predictions of the EKM and ANSYS.

Influence of Axial Excitations and of Boundary Conditions on the Parametric Instability of a Beam

1995 ◽  
Author(s):  
Régis Dufour ◽  
Alain Berlioz ◽  
Thomas Streule
Keyword(s):  
Finite Element ◽  
Boundary Conditions ◽  
Ritz Method ◽  
Parametric Instability ◽  
Experimental Tests ◽  
Time Varying ◽  
Periodic Force ◽  
Modal Reduction ◽  
Time Varying Parameter ◽  
The Stability

Abstract In this paper the stability of the lateral dynamic behavior of a pinned-pinned, clamped-pinned and clamped-clamped beam under axial periodic force or torque is studied. The time-varying parameter equations are derived using the Rayleigh-Ritz method. The stability analysis of the solution is based on Floquet’s theory and investigated in detail. The Rayleigh-Ritz results are compared to those of a finite element modal reduction. It shows that the lateral instabilities of the beam depend on the forcing frequency, the type of excitation and the boundary conditions. Several experimental tests enable the validation of the numerical results.

Magneto-electro-elastic vibration of moderately thick FG annular plates subjected to multi physical loads in thermal environment using GDQ method by considering neutral surface

2019 ◽  
Vol 233 (10) ◽  
pp. 2140-2159 ◽  
Author(s):  
Ehsan Arshid ◽  
Ali Kiani ◽  
Saeed Amir
Keyword(s):  
Boundary Conditions ◽  
Natural Frequencies ◽  
Thermal Environment ◽  
Differential Quadrature Method ◽  
Shear Deformation Theory ◽  
Elastic Vibration ◽  
Functionally Graded ◽  
Mode Shapes ◽  
Neutral Surface ◽  
Sensors And Actuators

The vibration analysis of an annular plate made up of functionally graded magneto-electro-elastic materials subjected to multi physical loads is presented. The plate is in thermal environment and temperature is distributed non-uniformly in its thickness direction. In addition, the plate is assumed moderately thick, the material properties vary through the thickness, and the exact neutral surface position is determined and took into account. According to Hamilton’s principle and the first-order shear deformation theory, the governing motion equations are extracted. Numerical results for various boundary conditions are obtained via the generalized differential quadrature method and are validated in simpler states with those of the literature. The effects of different parameters such as material property gradient index, multi physical loads, temperature variations, boundary conditions and geometric specifications of the plate on the natural frequencies and mode shapes are investigated. Temperature changes have little effect on the natural frequencies and the effect of electric potential on them is opposite of magnetic one. In other words, by increasing the magnetic potential, the rigidity of the plate increases too, and the frequency increases. The results of this study are useful to design more efficient sensors and actuators used in the smart or intelligent structures.

Stability of laminated composite and sandwich FGM shells using a novel isogeometric finite strip method

2019 ◽  
Vol 37 (4) ◽  
pp. 1369-1395 ◽  
Author(s):  
Mohammad Amin Shahmohammadi ◽  
Mojtaba Azhari ◽  
Mohammad Mehdi Saadatpour ◽  
Saeid Sarrami-Foroushani
Keyword(s):  
Boundary Conditions ◽  
Critical Loads ◽  
Laminated Composite ◽  
Functionally Graded ◽  
Laminated Shells ◽  
Content Type ◽  
Finite Strip ◽  
Strip Method ◽  
Finite Strip Method ◽  
The Stability

Purpose This paper aims to analyze the stability of laminated shells subjected to axial loads or external pressure with considering various geometries and boundary conditions. The main aim of the present study is developing an efficient combined method which uses the advantages of different methods, such as finite element method (FEM) and isogeometric analysis (IGA), to achieve multipurpose targets. Two types of material including laminated composite and sandwich functionally graded material are considered. Design/methodology/approach A novel type of finite strip method called isogeometric B3-spline finite strip method (IG-SFSM) is used to solve the eigenvalue buckling problem. IG-SFSM uses B3-spline basis functions to interpolate the buckling displacements and mapping operations in the longitudinal direction of the strips, whereas the Lagrangian functions are used in transverse direction. The current presented IG-SFSM is formulated based on the degenerated shell method. Findings The buckling behavior of laminated shells is discussed by solving several examples corresponding to shells with various geometries, boundary conditions and material properties. The effects of mechanical and geometrical properties on critical loads of shells are investigated using the related results obtained by IG-SFSM. Originality/value This paper shows that the proposed IG-SFSM leads to the critical loads with an approved accuracy comparing with the same examples extracted from the literature. Moreover, it leads to a high level of convergence rate and low cost of solving the stability problems in comparison to the FEM.

scholarly journals Free Transverse Vibration Analysis of Axially Functionally Graded Tapered Euler-Bernoulli Beams through Spline Finite Point Method

2016 ◽  
Vol 2016 ◽  
pp. 1-23 ◽  
Author(s):  
Peng Liu ◽  
Kun Lin ◽  
Hongjun Liu ◽  
Rong Qin
Keyword(s):  
Boundary Conditions ◽  
Transverse Vibration ◽  
Spline Interpolation ◽  
Computational Cost ◽  
Functionally Graded ◽  
Point Method ◽  
Finite Point ◽  
Various Boundary Conditions ◽  
Finite Point Method ◽  
Free Transverse Vibration

A new model for the free transverse vibration of axially functionally graded (FG) tapered Euler-Bernoulli beams is developed through the spline finite point method (SFPM) by investigating the effects of the variation of cross-sectional and material properties along the longitudinal directions. In the proposed method, the beam is discretized with a set of uniformly scattered spline nodes along the beam axis instead of meshes, and the displacement field is approximated by the particularly constructed cubic B-spline interpolation functions with good adaptability for various boundary conditions. Unlike traditional discretization and modeling methods, the global structural stiffness and mass matrices for beams of the proposed model are directly generated after spline discretization without needing element meshes, generation, and assembling. The proposed method shows the distinguished features of high modeling efficiency, low computational cost, and convenience for boundary condition treatment. The performance of the proposed method is verified through numerical examples available in the published literature. All results demonstrate that the proposed method can analyze the free vibration of axially FG tapered Euler-Bernoulli beams with various boundary conditions. Moreover, high accuracy and efficiency can be achieved.

Sign in / Sign up

Export Citation Format

Share Document