Untersuchungen an biochemisch wirksamen Ligandensystemen, V

1972 ◽  
Vol 27 (10) ◽  
pp. 1131-1136 ◽  
Author(s):  
P. Barz ◽  
H. P. Fritz
Keyword(s):  
Cyclic Voltammetry ◽  
Radical Cation ◽  
Epr Spectroscopy ◽  
Photoelectron Spectroscopy ◽  
Metal Cations ◽  
Redox Properties ◽  
Neutral Molecule ◽  
Ligand Field ◽  
Ligand Field Spectra

1,2-Dimethylhydrazine co-ordinates to numerous metal cations. The structures of the complexes of Cr, Mn, Co, Ni, Cu, Zn, Cd, Hg and Pt are discussed and the complexing abilities of the 1,2-dimethylhydrazine molecule are determined on the basis of the ligand field spectra of the nickel and the chromium derivative.The results of polarography, cyclic voltammetry and photoelectron spectroscopy yield evidence on the redox properties of the neutral molecule. By means of EPR spectroscopy the nature of the radical products obtained by irradiation of 1,2-dimethylhydrazine, especially of the radical cation, is determined.

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

Experimental Assessment of the Practical Oxidative Stability of Lithium Thiophosphate Solid Electrolytes

2019 ◽  
Author(s):  
Georg Dewald ◽  
Saneyuki Ohno ◽  
Marvin Kraft ◽  
Raimund Koerver ◽  
Paul Till ◽  
...  
Keyword(s):  
Cyclic Voltammetry ◽  
Solid State ◽  
Oxidative Stability ◽  
Photoelectron Spectroscopy ◽  
Solid Electrolytes ◽  
Stability Limit ◽  
Lithium Ion ◽  
High Energy ◽  
Redox Activity ◽  
Solid State Batteries

<p>All-solid-state batteries are often expected to replace conventional lithium-ion batteries in the future. However, the practical electrochemical and cycling stability of the best-conducting solid electrolytes, i.e. lithium thiophosphates, are still critical issues that prevent long-term stable high-energy cells. In this study, we use <i>stepwise</i><i>cyclic voltammetry </i>to obtain information on the practical oxidative stability limit of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>, a Li<sub>2</sub>S‑P<sub>2</sub>S<sub>5</sub>glass, as well as the argyrodite Li<sub>6</sub>PS<sub>5</sub>Cl solid electrolytes. We employ indium metal and carbon black as the counter and working electrode, respectively, the latter to increase the interfacial contact area to the electrolyte as compared to the commonly used planar steel electrodes. Using a stepwise increase in the reversal potentials, the onset potential at 25 °C of oxidative decomposition at the electrode-electrolyte interface is identified. X‑ray photoelectron spectroscopy is used to investigate the oxidation of sulfur(-II) in the thiophosphate polyanions to sulfur(0) as the dominant redox process in all electrolytes tested. Our results suggest that after the formation of these decomposition products, significant redox behavior is observed. This explains previously reported redox activity of thiophosphate solid electrolytes, which contributes to the overall cell performance in solid-state batteries. The <i>stepwise cyclic voltammetry</i>approach presented here shows that the practical oxidative stability at 25 °C of thiophosphate solid electrolytes against carbon is kinetically higher than predicted by thermodynamic calculations. The method serves as an efficient guideline for the determination of practical, kinetic stability limits of solid electrolytes. </p>

The Coordination Chemistry of Phosphoryl Compounds Containing the — N(CH3)2 Group, Part VIII

1972 ◽  
Vol 27 (7) ◽  
pp. 759-763 ◽  
Author(s):  
M. W. G. De Bolster ◽  
W. L. Groeneveld
Keyword(s):  
Coordination Chemistry ◽  
General Formula ◽  
Ligand Field ◽  
Chemical Analyses ◽  
X Ray ◽  
Physical Measurements ◽  
Ligand Field Spectra ◽  
Chloride Adduct ◽  
Ligand Field Parameters ◽  
Group Part

A number of new solvates and adducts containing bisphenyldimethylaminophosphine oxide is reported. The solvates have the general formula M[(C6H5)2P(O)N(CH3)2]42+(anion-)2, in which M = Mg, Ca, Mn, Fe, Co, Ni, Cu, Zn and Cd, and the anions are ClO4- and BF4-. The adducts have the general formula M[(C6H5)2P(O)N(CH3)2]2Cl2, where M stands for the same series of metals.The compounds are characterized and identified by chemical analyses and physical measurements.Ligand-field and vibrational spectra have been investigated; values for the ligand-field parameters are reported. It is concluded that coordination takes place via the oxygen atom of the ligand.X-ray powder patterns were used in combination with ligand-field spectra to deduce the coordination around the metal ions.The interesting behaviour of the nickel (II) chloride adduct upon heating is discussed and it is shown that both a square pyramidal and a tetrahedral modification exists.

Integrity and redox properties of homogeneous and heterogeneous DNA films on gold surface probed by cyclic voltammetry

2002 ◽  
Vol 413 (1-2) ◽  
pp. 218-223 ◽  
Author(s):  
Hellas C.M Yau ◽  
Hing Leung Chan ◽  
Sen-fang Sui ◽  
Mengsu Yang
Keyword(s):  
Cyclic Voltammetry ◽  
Gold Surface ◽  
Redox Properties ◽  
Dna Films

Application of a Novel Modified Electrode Based on NaY-Encapsulated Co(PAN) Complex

2008 ◽  
Vol 587-588 ◽  
pp. 109-113
Author(s):  
C. Teixeira ◽  
P. Parpot ◽  
Isabel Neves ◽  
António Maurício C. Fonseca
Keyword(s):  
Cyclic Voltammetry ◽  
Chemical Analysis ◽  
Aqueous Medium ◽  
Surface Analysis ◽  
Modified Electrode ◽  
Modified Electrodes ◽  
Redox Properties ◽  
New Method ◽  
Y Zeolite

CoPAN complex has been entrapped in the supercages of Y zeolite and the redox properties of this zeolite-encapsulated complex were investigated by cyclic voltammetry with a new method for the preparation of carbon toray-zeolite-modified electrode. Formation of the CoPAN complex was ascertained by surface analysis (SEM, XRD), chemical analysis (CA), spectroscopy methods (FTIR and UV/vis) and cyclic voltammetry in aqueous medium with zeolite-modified electrodes. The cyclic voltammetry studies obtained with a zeolite-modified electrode shows evidence for electroactivity restricted to boundary associated CoPAN complex.

Nickel(II) and Iron(II) Complexes with Tetradentate NHC/Amide Hybrid Ligands

2013 ◽  
Vol 68 (5-6) ◽  
pp. 458-466 ◽  
Author(s):  
Iris Klawitter ◽  
Steffen Meyer ◽  
Serhiy Demeshko ◽  
Franc Meyer
Keyword(s):  
Cyclic Voltammetry ◽  
Redox Properties ◽  
Spin States ◽  
Imidazolium Salts ◽  
Tetradentate Ligands ◽  
Square Planar ◽  
Hybrid Ligands

Two methylene-bridged bis(imidazolium) salts [H4L1](PF6)2 and [H4L2](PF6)2 with appended amide groups have been synthesized which, after deprotonation, may serve as potentially tetradentate ligands providing two bis(imidazole-2-ylidene) and two amide donors. Using [H4L1](PF6)2, a square-planar nickel(II) complex [NiL1] and a six-coordinate bis(ligand) iron(II) complex [Fe(HL1)2] have been isolated and structurally characterized. Their low-spin states have been confirmed spectroscopically, and their redox properties have been studied by cyclic voltammetry. Oxidations are metal-centered to give NiIII and FeIII species, respectively

A Two-step Electrodeposition of Pd-Cu/Cu2O Nanocomposite on FTO Substrate for Non-enzymatic Hydrogen Peroxide Sensor

2021 ◽  
Vol 17 ◽  
Author(s):  
Ke Huan ◽  
Li Tang ◽  
Dongmei Deng ◽  
Huan Wang ◽  
Xiaojing Si ◽  
...  
Keyword(s):  
Hydrogen Peroxide ◽  
Cyclic Voltammetry ◽  
Photoelectron Spectroscopy ◽  
Chemical Structure ◽  
Pd Nanoparticles ◽  
Optimal Conditions ◽  
Potential Oscillation ◽  
X Ray Diffraction ◽  
X Ray

Background: Hydrogen peroxide (H2O2) is a common reagent in the production and living, but excessive H2O2 may enhance the danger to the human body. Consequently, it is very important to develop economical, fast and accurate techniques for detecting H2O2. Methods: A simple two-step electrodeposition process was applied to synthesize Pd-Cu/Cu2O nanocomposite for non-enzymatic H2O2 sensor. Cu/Cu2O nanomaterial was firstly electrodeposited on FTO by potential oscillation technique, and then Pd nanoparticles were electrodeposited on Cu/Cu2O nanomaterial by cyclic voltammetry. The chemical structure, component, and morphology of the synthesized Pd-Cu/Cu2O nanocomposite were characterized by X-ray diffraction, scanning electron microscopy and X-ray photoelectron spectroscopy. The electrochemical properties of Pd-Cu/Cu2O nanocomposite were studied by cyclic voltammetry and amperometry. Results: Under optimal conditions, the as-fabricated sensor displayed a broad linear range (5-4000 µM) and low detection limit (1.8 µM) for the determination of H2O2. The proposed sensor showed good selectivity and reproducibility. Meanwhile, the proposed sensor has been successfully applied to detect H2O2 in milk. Conclusion: The Pd-Cu/Cu2O/FTO biosensor exhibits excellent electrochemical activity for H2O2 reduction, which has great potential application in the field of food safety.

scholarly journals EPR Spectroscopy Study of the Radical Cation Cluster (η⁵-C₅H₅)(CO)₅ReFePt(μ₃-C=CHPh)(η²-Ph₂P(CH₂)₂PPh₂)

2019 ◽  
pp. 573-579
Author(s):  
Nikolay G. Maksimov ◽  
Victor V. Verpekin ◽  
Dmitry V. Zimonin ◽  
Galina V. Burmakina ◽  
Oleg S. Chudin ◽  
...  
Keyword(s):  
Electronic Structure ◽  
Low Temperature ◽  
Radical Cation ◽  
Unpaired Electron ◽  
Iron Atom ◽  
Epr Spectroscopy ◽  
Binuclear Complex ◽  
Chemical Oxidation ◽  
Spectroscopy Study ◽  
Model Spectrum

The chemical oxidation of the cluster CpReFePt(μ3-C=CHPh)(CO)5(dppe) (Cp = η5-C5H5, dppe = η2- Ph2P(CH2)2PPh2) resulted in a radical cation [CpReFePt(μ3-C=CHPh)(CO)5(dppe)]+• that is sufficiently stable only at low temperature. An electronic structure of the radical cation was studied by EPR and following parameters were obtained by comparison of the experimental and model spectrum: gx = 2.070 gy = 2.0295 gz = 1.997; Ax(31P) = 17 Ay(31P) = 49 Az(31P) = 35 (Gs);Ax(195Pt) = 62 Ay(195Pt) = 45 Az(195Pt) = 105 (Gs). An unpaired electron is seen to be mainly concentrated on the iron atom (85-90%) and partially on the platinum atom (10-15%). Further transformation of the radical cation led to the formation of the binuclear complex Cp(CO)2RePt(μ-C=CHPh)(dppe) and the Fe-carbonyl fragment

Sign in / Sign up

Export Citation Format

Share Document