scholarly journals Effect of cement type and thickness on push-out bond strength of fiber posts

2018 ◽  
Vol 12 (4) ◽  
pp. 277-282
Author(s):  
Farzaneh Farid ◽  
Khadijeh Rostami ◽  
Sareh Habibzadeh ◽  
MohammadJavad Kharazifard
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Test Results ◽  
Resin Cements ◽  
Fiber Posts ◽  
Significant Difference ◽  
Root Dentin ◽  
Group 2 ◽  
Self Etch ◽  
Push Out

Background. This study investigated the effect of the thickness of two resin cements on push-out bond strength of fiber posts to root dentin. Methods. Sixty decoronated single-rooted teeth were endodontically treated. The specimens were then randomly allocated to two groups (n=30); group 1: drill size 90 w, matching the size of fiber posts used; group 2: drill size 110, larger than the posts. The specimens in each group were divided into 2 subgroups (n=15); subgroup SE, in which the posts were cemented with self-etch Panavia F2.0 and subgroup SA, in which self-adhesive Panavia cement was used. After 72 hours, 2 slices with 1 mm of thickness were prepared from the mid-root of each specimen. Push-out bond strength test was performed in a universal testing machine at a crosshead speed of 1 mm/min. Data were analyzed with two-way ANOVA and t-test. Results. The mean bond strengths of the posts cemented in matched-size spaces for SE and SA groups were 4.02±1.6 and 4.12±2.3 MPa, respectively. For posts cemented in oversized spaces, the values were 4.9±2.3 and 2.8±1.3 MPa, respectively. In matched-size spaces, there was no significant difference between the two groups. Conclusion. The results of this study suggested that increasing the cement thickness would reduce the bond strength of fiber posts to root dentin when self-adhesive cements are used; however, self-etch adhesives were not affected.

scholarly journals Effect of different root dentin pretreatment protocols on the bond strength of fiber posts cemented with core buildup material

2019 ◽  
Vol 22 (1) ◽  
pp. Process
Author(s):  
Rowaida Naeem ◽  
Maged Zohdy ◽  
Tarik Salah
Keyword(s):  
Bond Strength ◽  
Failure Modes ◽  
Testing Machine ◽  
Calculated Data ◽  
Core Material ◽  
Fiber Posts ◽  
Stereo Microscope ◽  
Root Dentin ◽  
Self Etch ◽  
Push Out

Objective: The purpose of the study was to evaluate the push out bond strength of fiber posts -after cementaion with core build up material and dentin pretreatment using different adhesive protocols- in different root regions. Material and Methods: 28 endodonticaly treated human premolars were divided into 4 groups. The post spaces were treated with 1 of 4 different dentin bonding protocols: total etch light cured adhesive, solobond m; total etch dual cured adhesive, Excite f DSC; self-etching light cured adhesive, single bond universal; or self-etching dual cured adhesive, futura bond dc. Fiber posts, were luted with dual cured core material. The roots were cut into 2-mm-thick sections, in cervical, middle, and apical regions. Push-out tests were performed with a universal testing machine, and bond strength values (MPa) were calculated. Data were analyzed with 1- and 2-way analysis of variance and Tukey multiple comparison tests (a=.05). Failure modes were examined under stereo microscope. Results: The highest mean bond strength values were obtained for self-etch dual cured adhesive, (9.69 MPa). The Total etch light cured adhesive (2.81 MPa) showed the lowest bond strength. Self-etch light-polymerized and total etch dual-polymerized adhesives provided similar bond strengths (5.37, 5.72 respectively). The regional bond strength values were reduced significantly in apical post space (P<0.01). The most predominant failure type was mixed failure followed by adhesive failure. Conclusion: Dentin pretreatment using self-etch dual cured adhesives prior to fiber posts cementation offers a high bond strength. While using total-etch light cured adhesives is not recommended due to the low bonding quality. KeywordsDentin; Bond strength; Fiber posts; Core buildup material; Adhesive protocols; Pretreatment.

scholarly journals Adhesion of real seal to human root dentin treated with different solutions

2012 ◽  
Vol 23 (5) ◽  
pp. 521-526 ◽  
Author(s):  
Renata Baldissera ◽  
Ricardo Abreu da Rosa ◽  
Márcia Helena Wagner ◽  
Milton Carlos Kuga ◽  
Fabiana Soares Grecca ◽  
...  
Keyword(s):  
Bond Strength ◽  
Root Canal ◽  
Failure Modes ◽  
Chlorhexidine Gluconate ◽  
The Other ◽  
Significant Difference ◽  
Root Dentin ◽  
Bond Strengths ◽  
Group 2 ◽  
Push Out

The aim of this study was to evaluate the effects of different irrigants on sealer-dentin bond strength when using Real Seal. Thirty single-rooted teeth were divided into 3 groups. In one group, the teeth were irrigated with 3 mL of 2.5% NaOCl after each file change, flushed with 17% EDTA for 3 min and finally rinsed with 3 mL of 2.5% NaOCl. In the other two groups, rinse with NaOCl was replaced with 2% chlorhexidine gluconate (CHX) and 0.9% saline, respectively. Each root was sectioned transversally into apical, middle and coronal thirds to obtain 2-mm-thick slices. Each slice was filled with Real Seal and Resilon. Push-out test was used to analyze bond strength and failure modes were classified as adhesive, cohesive or mixed, according to SEM observations. The push-out test did not reveal any statistically significant difference (p>0.05) between the irrigants. However, the groups exhibited significantly different (p<0.05) bond strengths in terms of the root canal third. Higher bond strength was observed at the apical third when compared with coronal third, while middle third presented intermediary values. Fifteen specimens were analyzed by SEM (5 per group). Eleven specimens exhibited adhesive failures (5 in saline, 4 in NaOCl and 2 in CHX group); 2 cohesive failures were observed in the CHX group, and 1 mixed failure each was observed in the CHX and NaOCl groups. The tested irrigants did not influence the bond strength of Resilon and Real Seal to dentin. The apical third exhibited higher mean bond strengths and adhesive failures were predominant.

scholarly journals Effect of Dentin Pretreatment with Chlorhexidine on Push-Out Bond Strength of Composite Restorations in Severely Damaged Primary Anterior Teeth

2020 ◽  
Author(s):  
Shabnam Milani ◽  
Bahman Seraj ◽  
Zahra Khoshlafz ◽  
Niusha Abazarian
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
Bonding Agent ◽  
Bonding Agents ◽  
Composite Restorations ◽  
Anterior Teeth ◽  
Significant Difference ◽  
Self Etch ◽  
Push Out

Objectives: Achieving durable restorations with adequate strength in severely damaged primary anterior teeth in children is a priority. The aim of this study was to investigate the effect of dentin pretreatment with chlorhexidine on push-out bond strength of composite restorations. Materials and Methods: In this in vitro experimental study, 56 extracted primary anterior teeth were randomly divided into 4 groups: (1) saline and total-etch bonding agent, (2) chlorhexidine and total-etch bonding agent, (3) saline and self-etch bonding agent, and (4) chlorhexidine and self-etch bonding agent. After the application of bonding agents, the post space was filled with Z250 composite resin. Following thermocycling of the samples, the push-out test was performed using a universal testing machine, and the results were analyzed with two-way ANOVA. Results: The mean push-out bond strength values in groups 1 to 4 were 5.7, 8.39, 5.35, and 7 MPa, respectively. Chlorhexidine groups had significant differences with saline groups in bond strength (P<0.05) but there was no statistically significant difference between the self-etch and total-etch bonding agents in the groups (P>0.05). Conclusion: Both types of bonding agents (self-etch and total-etch) exhibited favorable results in radicular dentin of primary anterior teeth; however, pre-treatment with chlorhexidine increased the push-out bond strength of composite restorations in primary anterior teeth.

scholarly journals Influence of Relining Post on the Bond Strength of Resin Cements

2015 ◽  
Vol 16 (7) ◽  
pp. 559-564 ◽  
Author(s):  
Matheus Coelho Bandéca ◽  
Adriano Augusto Melo de Mendonça ◽  
Etevaldo Matos Maia Filho ◽  
Fausto da Silva Bramante ◽  
Darlon Martins Lima ◽  
...  
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
The Self ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Significant Difference ◽  
Adhesive Cement ◽  
Push Out

ABSTRACT This study evaluated the influence of relining fiber posts on the bond strength (BS) of resin cements in the root canal. Forty bovine teeth were divided in four groups (n = 10)G1 (ARC)—fiber post cemented with resin cement RelyX ARC; G2 (ARC+Z350)—relined fiber post cemented with RelyX ARC; G3 (U200)—fiber post cemented with self-adhesive cement RelyX U200; G4 (U200+Z350)—relined fiber post cemented with RelyX U200. The roots were sectioned in six 1.2-mm slices and the push-out test was performed. Data were analyzed by three-way analysis of variance (ANOVA), and Tukey's test (α = 0.05). For the conventional resin cement, there was no significant difference between groups G1-ARC (15.5 ± 3.8) and G2-ARC+Z350 (16.1 ± 4.5). For the self-adhesive cement, the results revealed higher BS values for relined posts G4-U200 + Z350 (19.9 ± 7.9) as compared to non-relined posts G3-U200 (14.4 ± 4.5). For both cements, in groups of relined posts, the apical and the cervical thirds presented similar BS. Relining enhances the performance of the self-adhesive resin cement, and the interaction between relining and root third influences the BS to the conventional resin cement. How to cite this article Conde DM, Rodrigues VP, de Fátima Carvalho Souza S, Bauer JRO, da Silva Bramante F, Lima SNL, Filho EMM, Bandeca MC, de Mendonça AAM, Lima DM. Influence of Relining Post on the Bond Strength of Resin Cements. J Contemp Dent Pract 2015;16(7):559-564.

scholarly journals COMPARATIVE EVALUATION OF PUSH-OUT BOND STRENGTH AND FAILURE MODES OF FIBER POST CEMENTED WITH DIFFERENT ADHESIVE RESIN CEMENTS: AN IN-VITRO STUDY

2020 ◽  
pp. 1-3
Author(s):  
Sonali Bansod ◽  
Ashwini Gaikwad ◽  
Abhijit Jadhav
Keyword(s):  
Bond Strength ◽  
Resin Cement ◽  
Fiber Post ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Significant Difference ◽  
Group 3 ◽  
Adhesive Resin Cement ◽  
Group 2 ◽  
Push Out

Aim: To compare the push-out bond strength and modes of failure of fiber post cemented with different adhesive resin cements. Materials and Method: Forty five single rooted teeth were randomly divided into three groups as, group 1- Fluorocore 2+, group 2- Rely-X U200 and group 3-G-Cem, according to the adhesive resin cement used. The roots were subjected to chemo-mechanical preparation and cemented with adhesive resin cement. The teeth were sectioned into slices of the different root thirds and tested for bond strength (push out). Results were analysed using Chi square, Mann Whitney U and Kruskal Wallis test was used to find the significance of study parameters between three or more groups, with p = 0.05 for statistical significance. Result: Push out bond strength of Fluorocore 2+ is significantly higher at coronal level than apical level. No significant difference observed between coronal, middle and apical levels in group 2 and in group 3. Conclusion: Fluorocore 2+ adhesive resin cement is best to use for luting the fibre post. Fluorocore 2+ forms better bonding with post as well as dentin proving its better efficiency clinically.

scholarly journals Influence of Er,Cr:YSGG Laser Irradiation on the Push-Out Bond Strength of Zirconia and Glass Fiber Posts with Radicular Dentin

2019 ◽  
Vol 2019 ◽  
pp. 1-5
Author(s):  
Raneem S. Alofi ◽  
Ibraheem F. Alshiddi ◽  
Yasser F. AlFawaz ◽  
Abdulaziz Alsahhaf ◽  
Khulud Abdulrahman Al-Aali ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Testing Machine ◽  
Resin Cement ◽  
Cervical Region ◽  
Fiber Posts ◽  
Significant Difference ◽  
Glass Fiber Posts ◽  
Push Out

Objective. This in vitro study was designed to evaluate the influence of an Er,Cr:YSGG laser on the bond strength of zirconia and glass fiber posts with root dentin. Materials and methods. Ninety extracted single-rooted human teeth were randomized into 6 groups (n = 15/group) on the basis of different posts (zirconia/glass fiber) and Er,Cr:YSGG laser tips (axial and radial). Specimens were prepared for push-out testing with the help of a cutting machine; six slices (2 on each cervical, middle, and apical) of approximately 1 mm thickness were sectioned for all roots on a plane perpendicular to the long axis of the post. All specimens were placed into a universal testing machine with a defined 0.5 mm/min crosshead speed until the maximum failure load was obtained. Results. The highest mean push-out bond strength of the glass fiber and zirconia groups was achieved with laser treatment. The highest push-out bond strength was achieved with the axial fiber tip (7.63 ± 1.22 MPa), and the lowest was achieved with a radial fiber tip of the glass fiber group (6.98 ± 0.96 MPa). ANOVA showed a statistically significant difference between the groups (p=0.041). The mean push-out bond strength was found to be higher with an axial fiber tip for both cervical and apical segments in the glass fiber and zirconia groups (p<0.05). The independent t-test resulted in the overall highest mean push-out bond strength in the apical segments (p=0.026). Conclusion. Within the limits of the present in vitro research study, an enhancement in the push-out bond strength of resin cement, mainly in the cervical region of the root canal, was achieved after irradiation with an Er,Cr:YSGG laser using an axial fiber tip.

scholarly journals Bond strength of glass fiber posts submitted to different luting protocols

2016 ◽  
Vol 31 (2) ◽  
pp. 77
Author(s):  
Fabiano Vieira De Landa ◽  
Jean Soares Miranda ◽  
Rodrigo Furtado De Carvalho ◽  
Estevão Tomomitsu Kimpara ◽  
Fabíola Pessôa Pereira Leite
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Testing Machine ◽  
Dentinal Tubules ◽  
Fiber Posts ◽  
Cutting Machine ◽  
Glass Fiber Posts ◽  
Glass Fiber Post ◽  
Root Dentin ◽  
Push Out

Objective: evaluate the effect of different luting protocols on the bond strength of glass fiber posts.Methods: Forty human canine teeth were randomly divided into four groups: Relyx U100/Endofill (R+E), Panavia F2.0/EndoFill (P+E), Relyx U100/Sealer 26 (R+S), Panavia F2.0/Sealer 26 (P+S). After the luting procedures, the samples were subjected to thermocycling (6.000 cycles; at 5±1 ºC and 55±1 ºC) and then sectioned in a precision cutting machine (Isomet 1000 Precision Saw) into 4 cuts of 2mm regarding to different deepness: Apical, Medium Apical, Medium Coronal, and Coronal. Next, the cuts were submitted to push-out test in a universal testing machine (EMIC) with load cell of 50N, at crosshead speed of 0.5mm/min.Results: They were obtained according to the different luting deepness (p≥0.05) (MPa): 1) apical – R+E (1.35±1.28), P+E (2.70±0.89), R+S (3.89±0.70), P+S (4.30±1.02); 2) medium apical – R+E (1.38±1.28), P+E (2.98±1.43), R+S (4.02±1.14), P+S (4.49±1.82); 3) medium coronal – R+E (2.46±0.73), P+E (3.72±0.78), R+S (4.85±0.71), P+S (6.14±0.73); 4) coronal R+E (5.59±1.08), P+E (5.74±1.06), R+S (6.71±1.07), P+S (7.40±1.51).Conclusion: There was a relationship between the luting protocol of the glass fiber post and the endodontic cement. Eugenol plays an important role inside the dentinal tubules by interfering negatively in the bond strength to root dentin.

scholarly journals Effect of Sonic Application of Self-Adhesive Resin Cements on Push-Out Bond Strength of Glass Fiber Posts to Root Dentin

Materials ◽  
2019 ◽  
Vol 12 (12) ◽  
pp. 1930
Author(s):  
Darlon Martins Lima ◽  
Thátyla Silva Linhares ◽  
Suellen Nogueira Linares Lima ◽  
Edilausson Moreno Carvalho ◽  
Alessandro Dourado Loguercio ◽  
...  
Keyword(s):  
Bond Strength ◽  
Glass Fiber ◽  
Fracture Pattern ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Fiber Posts ◽  
Luting Cement ◽  
Glass Fiber Posts ◽  
Root Dentin ◽  
Push Out

The aim of this study was to evaluate the influence of a sonic application of self-adhesive resin cements on the bond strength of glass fiber posts to root dentin. Eighty bovine incisors were randomly divided into eight groups (n = 10). Four self-adhesive resin cements were used—RelyX U200 (3M/ESPE), Bifix SE (Voco), seT PP (SDI), and Panavia SA (Kuraray). The cements were inserted into the root canal in two different modes—Centrix syringe (control) or with a sonic device (Sonic Smart). The roots were sectioned and taken to a universal test machine (Instron 3342) to perform the push-out test. The fracture pattern was evaluated by stereomicroscope and scanning electron microscope. The bond strength data were analyzed by two-way ANOVA and Tukey tests (α = 0.05). The interaction between the main factors was significant (p = 0.002). The sonic application increased the bond strength in comparison with the conventional application for the RelyX U200 (p < 0.001) and Bifix SE (p < 0.017) cements. However, for the seT PP and Panavia SA cements, the bond strength values did not differ significantly (p > 0.05). The fracture pattern showed adhesive at the interface between the luting cement and the dentin. Using a sonic device in the application of self-adhesive resin cement helpedpromote an increase in the bond strength for RelyX U200 and Bifix SE.

Effects of Desensitizers, Temporary Cements, and Dentin Cleaning Methods on the Bond Strength of Self-Etch/ Adhesive Resin Cements to Dentin: An In Vitro Study

2021 ◽  
pp. 232020682110527
Author(s):  
Mehmet Uğur ◽  
I˙dris Kavut ◽  
Şafak Külünk ◽  
Mehmet Şerif Akdeniz ◽  
Özgür Ozan Tanrıkut
Keyword(s):  
Bond Strength ◽  
Testing Machine ◽  
In Vitro Study ◽  
Resin Cement ◽  
Resin Cements ◽  
Adhesive Resin ◽  
Significant Difference ◽  
Cleaning Methods ◽  
Self Etch

Aim: The aim of this study was to evaluate the effect of desensitizer, temporary cements, dentin cleaning methods on shear bond strength (SBS) of self-etch and self-adhesive resin cements to dentin. Materials and Methods: Four hundred eighty buccal or lingual/palatine coronal portions of human molar teeth were mounted in the acrylic blocks. Teeth surfaces were prepared until the dentin was exposed. Specimens were divided into four groups. One group separated as control and three groups of teeth were treated with a desensitizing agent containing calcium-phosphate desensitizer (Teethmate Desensitizer, TMD), resin-based self-reinforcing monomer (Shield Force Plus, SFP) and 2-hydroxyethyl methacrylate and glutaraldehyde (Gluma Desensitizer). Two different temporary cement containing calcium hydroxide (Dycall) and zinc oxide based (Rely X Temp NE) temporary cement were applied to the dentin surfaces. Temporary cement was removed with one of three cleansing techniques: 2% chlorhexidine digluconate and glass particles containing agent (Consepsis Scrub), cleansing bur (OptiClean), and ıntra/extracoronal rotary brush (Starbrush). All groups were further divided into two cementation subgroups (Panavia V5 and Panavia SA). The SBS (MPa) was measured using a universal testing machine at 0.5 mm/min crosshead speed. The data were analyzed statistically with a four-way analysis of variance and Tukey’s Honest Significant Difference test ( α = 0.05). Results: Although SFP showed higher SBS, there was no statistically significant difference between other groups ( P > .05). There were no significant differences between temporary cements ( P > .05). OptiClean rotary bur showed higher mean SBS values in all groups. The dual-polymerized Panavia V5 showed the highest SBS values in all groups ( P <.05). Conclusion: Cleaning of dentin surface from temporary cement remnants with a silicon bur and dual-cure resin cement showed the highest bond strength values.

scholarly journals EFFECTS OF COLD LATERAL VERSUS WARM VERTICAL COMPACTION OBTURATION ON THE PUSH-OUT BOND STRENGTH OF BIOROOT™, A CALCIUM SILICATE-BASED SEALER

2020 ◽  
pp. 77-79
Author(s):  
ANDARI PUTRIANTI ◽  
MUNYATI USMAN ◽  
KAMIZAR NAZAR ◽  
RATNA MEIDYAWATI ◽  
ENDANG SUPRASTIWI ◽  
...  
Keyword(s):  
Bond Strength ◽  
Calcium Silicate ◽  
Testing Machine ◽  
Root Canals ◽  
Universal Testing ◽  
Significant Difference ◽  
Group 2 ◽  
Warm Vertical Compaction ◽  
Push Out ◽  
Group 1

Objective: BioRoot™ , which contains pure calcium silicate, is used in cold lateral compaction. However, hydroxyl ions are still released when BioRoot™is used in warm vertical compaction. This study compared the effects of cold and warm vertical compaction obturation on the push-out bond strengthof BioRoot™.Methods: Specimens from 16 root canals instrumented with ProTaper Next X5 50/06 were divided into two groups (n=16 specimens per group).Group 1 was obturated using cold lateral compaction, whereas Group 2 was obturated using warm vertical compaction. All samples were incubatedfor 48 h (37°C, 100% humidity) and embedded into an acrylic block. Starting at 7 mm from the apex, two 2-mm-thick slices of each sample were cut.Dislodgement resistance was measured using a universal testing machine, and the push-out bond strength was calculated.Results: There was a significant difference in the push-out bond strength value between cold (4.5–41.1 MPa) and warm (4.12–24.25 MPa) compactionobturation (p<0.05).Conclusion: Cold lateral compaction provides better adhesion capability than warm vertical compaction in root canal obturation.

Sign in / Sign up

Export Citation Format

Share Document