Specification for Re-Refined Engine Oil Bottoms (REOB)/Vacuum Tower Asphalt Extender (VTAE)

10.1520/d8125 ◽  
2019 ◽  
Author(s):  
Keyword(s):  
Engine Oil ◽  
Vacuum Tower

Development of thickened semi-synthetic engine oil M-5z / 20 AERO for four-stroke gasoline engines aircraft piston of unmanned aerial vehicles (UAVs)

2020 ◽  
Vol 06 ◽  
pp. 44-47
Author(s):  
A.A. Moykin ◽  
◽  
A.S. Medzhibovsky ◽  
S.A. Kriushin ◽  
M.V. Seleznev ◽  
...  
Keyword(s):  
Unmanned Aerial Vehicles ◽  
Engine Oil ◽  
Motor Oil ◽  
Gasoline Engines ◽  
State Research Institute ◽  
Technical Requirements ◽  
Aerial Vehicles ◽  
State Research ◽  
Industrial Batch ◽  
The Russian Federation

Nowadays, the creation of remotely-piloted aerial vehicles for various purposes is regarded as one of the most relevant and promising trends of aircraft development. FAU "25 State Research Institute of Chemmotology of the Ministry of Defense of the Russian Federation" have studied the operation features of aircraft piston engines and developed technical requirements for motor oil for piston four-stroke UAV engines, as well as a new engine oil M-5z/20 AERO in cooperation with NPP KVALITET, LLC. Based on the complex of qualification tests, the stated operational properties of the experimental-industrial batch of M-5z/20 AERO oil are generally confirmed.

Controlling porosity and density of nanocellulose aerogels for superhydrophobic light materials

TAPPI Journal ◽  
2018 ◽  
Vol 17 (03) ◽  
pp. 145-153 ◽  
Author(s):  
Chengua Yu ◽  
Feng Wang ◽  
Shiyu Fu ◽  
Lucian Lucia
Keyword(s):  
Contact Angle ◽  
Freeze Drying ◽  
Engine Oil ◽  
High Porosity ◽  
Water Mixture ◽  
Waste Engine Oil ◽  
Hydrophobically Modified ◽  
Static Contact ◽  
Oil Water ◽  
Hydrophobic Material

A very low-density oil-absorbing hydrophobic material was fabricated from cellulose nanofiber aerogels–coated silane substances. Nanocellulose aerogels (NCA) superabsorbents were prepared by freeze drying cellulose nanofibril dispersions at 0.2%, 0.5%, 0.8%, 1.0%, and 1.5% w/w. The NCA were hydrophobically modified with methyltrimethoxysilane. The surface morphology and wettability were characterized by scanning electron microscopy and static contact angle. The aerogels displayed an ultralow density (2.0–16.7 mg·cm-3), high porosity (99.9%–98.9%), and superhydrophobicity as evidenced by the contact angle of ~150° that enabled the aerogels to effectively absorb oil from an oil/water mixture. The absorption capacities of hydrophobic nanocellulose aerogels for waste engine oil and olive oil could be up to 140 g·g-1 and 179.1 g·g-1, respectively.

DETERMINATION OF GLYCOL CONTAMINATION IN ENGINE OIL BY INFRARED AND UV-VIS SPECTROSCOPY

2018 ◽  
Author(s):  
Torrey Holland ◽  
Dennis Watson ◽  
P Sivakumar ◽  
Ali Abdul-Munaim ◽  
Robinson Karunanithy
Keyword(s):  
Engine Oil ◽  
Vis Spectroscopy

Effect of organic amendments on the decontamination potential of heavy metals by Staphylococcus aureus and Bacillus cereus in soil contaminated with spent engine oil

2019 ◽  
Vol 3 (5) ◽  
pp. 471-484
Author(s):  
Adeniyi Adeleye ◽  
Mohammed B. Yerima ◽  
Michael E. Nkereuwem ◽  
Victor O. Onokebhagbe ◽  
Peter G. Shiaka ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Staphylococcus Aureus ◽  
Bacillus Cereus ◽  
Organic Amendments ◽  
Engine Oil ◽  
Spent Engine Oil

Utilization of waste engine oil for expanded clay aggregate production and assessment of its influence on lightweight concrete properties

2020 ◽  
pp. 121677
Author(s):  
Claudia Burbano-Garcia ◽  
Ana Hurtado ◽  
Yimmy Fernando Silva ◽  
Silvio Delvasto ◽  
Gerardo Araya-Letelier
Keyword(s):  
Lightweight Concrete ◽  
Engine Oil ◽  
Aggregate Production ◽  
Waste Engine Oil ◽  
Concrete Properties
Sign in / Sign up

Export Citation Format

Share Document