Low Strain-Rate Microstructural Deformation Behavior in 316 Stainless Steel Irradiated in EBR-II

2006 ◽  
Vol 3 (2) ◽  
pp. 12400
Author(s):  
JI Cole ◽  
TR Allen ◽  
H Tsai ◽  
T Yoshitake ◽  
I Yamagata ◽  
...  
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
Deformation Behavior ◽  
316 Stainless Steel ◽  
Low Strain Rate ◽  
Microstructural Deformation

scholarly journals Theoretical and Experimental Study on Hot-Embossing of Glass-Microprism Array without Online Cooling Process

Micromachines ◽  
2020 ◽  
Vol 11 (11) ◽  
pp. 984
Author(s):  
Manfeng Hu ◽  
Jin Xie ◽  
Wei Li ◽  
Yuanhang Niu
Keyword(s):  
Thermal Stress ◽  
Strain Rate ◽  
Deformation Behavior ◽  
Optical Glass ◽  
Low Cost ◽  
Hot Embossing ◽  
Control Device ◽  
Grinding Wheel ◽  
Cooling Process ◽  
Low Strain Rate

Optical glass-microprism arrays are generally embossed at high temperatures, so an online cooling process is needed to remove thermal stress, but this make the cycle long and its equipment expensive. Therefore, the hot-embossing of a glass-microprism array at a low strain rate with reasonable embossing parameters was studied, aiming at reducing thermal stress and realizing its rapid microforming without online cooling process. First, the flow-field, strain-rate, and deformation behavior of glass microforming were simulated. Then, the low-cost microforming control device was designed, and the silicon carbide (SiC) die-core microgroove array was microground by the grinding-wheel microtip. Lastly, the effect of the process parameters on forming rate was studied. Results showed that the appropriate embossing parameters led to a low strain rate; then, the trapezoidal glass-microprism array could be formed without an online cooling process. The standard deviation of the theoretical and experimental forming rates was only 7%, and forming rate increased with increasing embossing temperature, embossing force, and holding duration, but cracks and adhesion occurred at a high embossing temperature and embossing force. The highest experimental forming rate reached 66.56% with embossing temperature of 630 °C, embossing force of 0.335 N, and holding duration of 12 min.

scholarly journals Effect of Nitrogen Content on Hot Deformation Behavior and Grain Growth in Nuclear Grade 316LN Stainless Steel

2015 ◽  
Vol 2015 ◽  
pp. 1-8 ◽  
Author(s):  
Ming-wei Guo ◽  
Zhen-hua Wang ◽  
Ze-an Zhou ◽  
Shu-hua Sun ◽  
Wan-tang Fu
Keyword(s):  
Stainless Steel ◽  
Dynamic Recrystallization ◽  
Strain Rate ◽  
Grain Growth ◽  
Strain Rate Sensitivity ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Rate Sensitivity ◽  
Processing Maps ◽  
Hot Deformation Behavior

316LN stainless steel with 0.08%N (08N) and 0.17%N (17N) was compressed at 1073–1473 K and 0.001–10 s−1. The hot deformation behavior was investigated using stress-strain curve analysis, processing maps, and so forth. The microstructure was analyzed through electron backscatter diffraction analysis. Under most conditions, the deformation resistance of 17N was higher than that of 08N. This difference became more pronounced at lower temperatures. The strain rate sensitivity increased with increasing temperature for types of steel. In addition, the higher the N content, the higher the strain rate sensitivity. Hot deformation activation energy increased from 487 kJ/mol to 549 kJ/mol as N concentration was increased from 0.08% to 0.17%. The critical strain for initiation of dynamic recrystallization was lowered with increasing N content. In the processing maps, both power dissipation ratio and unstable region increased with increasing N concentration. In terms of microstructure evolution, N promoted dynamic recrystallization kinetic and decreased dynamic recrystallization grain size. The grain growth rate was lower in 17N than in 08N during heat treatment. Finally, it was found that N favored twin boundary formation.

Experimental study and prediction of deformation behavior of low carbon steel at low strain rate and high temperature

2013 ◽  
Vol 58 (10) ◽  
pp. 940-945 ◽  
Author(s):  
Wei ZHOW ◽  
GuiNan ZHANG ◽  
Ying XIA ◽  
TongBin SHAO ◽  
Xue Fei CHEN ◽  
...  
Keyword(s):  
Experimental Study ◽  
High Temperature ◽  
Carbon Steel ◽  
Strain Rate ◽  
Deformation Behavior ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Low Strain Rate

Artificial Neural Network to Predict the Hot Deformation Behavior of Super 13Cr Martensitic Stainless Steel

2011 ◽  
Vol 695 ◽  
pp. 361-364 ◽  
Author(s):  
Ying Han ◽  
Guan Jun Qiao ◽  
Dong Na Yan ◽  
De Ning Zou
Keyword(s):  
Neural Network ◽  
Artificial Neural Network ◽  
Stainless Steel ◽  
Flow Stress ◽  
Strain Rate ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Martensitic Stainless Steel ◽  
Ann Model ◽  
Hot Deformation Behavior

The hot deformation behavior of super 13Cr martensitic stainless steel was investigated using artificial neural network (ANN). Hot compression tests were carried out at the temperature range of 950°C to 1200°C and strain rate range of 0.1–50s–1at an interval of an order of magnitude. Based on the limited experimental data, the ANN model for the constitutive relationship existed between flow stress and strain, strain rate and deformation temperature was developed by back-propagation (BP) neural network method. A three layer structured network with one hidden layer and ten hidden neurons was trained and the normalization method was employed in training for avoiding over fitting. Modeling results show that the developed ANN model can efficiently predict the flow stress of the steel and reflect the hot deformation behavior in the whole deforming process.

Investigation on Hot Deformation Behavior of 430 Ferritic Stainless Steel

2013 ◽  
Vol 721 ◽  
pp. 82-85
Author(s):  
Jian Bin Zhang ◽  
Dong Mei Yu ◽  
Shao Rui Niu ◽  
Gen Shun Ji
Keyword(s):  
Stainless Steel ◽  
Strain Rate ◽  
Ferritic Stainless Steel ◽  
Hot Deformation ◽  
Deformation Behavior ◽  
Flow Behavior ◽  
Peak Stress ◽  
Hot Deformation Behavior ◽  
Hollomon Parameter ◽  
Deformation Equation

The hot deformation behavior and microstructure evolution of 430 ferritic stainless steel (430 FSS) were investigated within the temperature range of 950°C~1150°C at the strain rate of 0.01 s-1, 0.1 s-1, and 1.0 s-1using a thermo-mechanical simulator. The effects of temperature and strain rate on the flow behavior and microstructures of 430 ferritic stainless steel at reduction ratio 50 % were analyzed. Results indicated that the apparent stress exponent and the apparent activation energy of the steel were about 1.08 and 344 kJ/mol, respectively. The hot deformation equation of 430 was considered as. There was a relationship between the softening mechanism and Zener-Hollomon parameter (abbreviated Z). With the Z value increasing from 4.30×1010to 5.00×1014, the hot deformation peak stress correspondingly increased from 10.74 MPa to 76.02MPa.

Sign in / Sign up

Export Citation Format

Share Document