Microscopical Studies of Impact and Shock Loading of Metals and Fluorocarbon Polymers Immersed in Liquid Fluorine

2009 ◽  
pp. 273-273-16
Author(s):  
N. A. Tiner ◽  
S. K. Asunmaa
Keyword(s):  
Shock Loading

Electron Microscope Observations of Mechanical Metamorphism in Iron Meteorites

1970 ◽  
Vol 28 ◽  
pp. 488-489
Author(s):  
D. Faulkner ◽  
G.W. Lorimer ◽  
H.J. Axon
Keyword(s):  
Electron Microscope ◽  
Defect Structure ◽  
Shock Loading ◽  
List Type ◽  
Iron Meteorites

It is now generally accepted that meteorites are fragments produced by the collision of parent bodies of asteroidal dimensions. Optical metallographic evidence suggests that there exists a group of iron meteorites which exhibit structures similar to those observed in explosively shock loaded iron. It seems likely that shock loading of meteorites could be produced by preterrestrial impact of their parent bodies as mentioned above.We have therefore looked at the defect structure of one of these meteorites (Trenton) and compared the results with those made on a) an unshocked ‘standard’ meteorite (Canyon Diablo)b) an artificially shocked ‘standard’ meteorite (Canyon Diablo) andc) an artificially shocked specimen of pure α-iron.

Electron Microscopy of Shock Loaded Polycrystalline Beryllium

1974 ◽  
Vol 32 ◽  
pp. 506-507 ◽  
Author(s):  
J. M. Galbraith ◽  
L. E. Murr ◽  
A. L. Stevens
Keyword(s):  
Electron Microscopy ◽  
Wave Propagation ◽  
Structural Change ◽  
Single Crystal ◽  
Diffraction Pattern ◽  
Shock Loading ◽  
Slip Systems ◽  
Compression Tests ◽  
X Ray Diffraction ◽  
X Ray

Uniaxial compression tests and hydrostatic tests at pressures up to 27 kbars have been performed to determine operating slip systems in single crystal and polycrystal1ine beryllium. A recent study has been made of wave propagation in single crystal beryllium by shock loading to selectively activate various slip systems, and this has been followed by a study of wave propagation and spallation in textured, polycrystal1ine beryllium. An alteration in the X-ray diffraction pattern has been noted after shock loading, but this alteration has not yet been correlated with any structural change occurring during shock loading of polycrystal1ine beryllium.This study is being conducted in an effort to characterize the effects of shock loading on textured, polycrystal1ine beryllium. Samples were fabricated from a billet of Kawecki-Berylco hot pressed HP-10 beryllium.

Effect of Shock Loading on the Microstructure of Uniloy 326

1974 ◽  
Vol 32 ◽  
pp. 504-505
Author(s):  
K. P. Staudhammer ◽  
L. E. Murr
Keyword(s):  
Grain Size ◽  
Shock Loading ◽  
Current Investigation ◽  
Two Phase ◽  
05 C ◽  
Shock Deformation ◽  
Heat Treated

The effect of shock loading on a variety of steels has been reviewed recently by Leslie. It is generally observed that significant changes in microstructure and microhardness are produced by explosive shock deformation. While the effect of shock loading on austenitic, ferritic, martensitic, and pearlitic structures has been investigated, there have been no systematic studies of the shock-loading of microduplex structures.In the current investigation, the shock-loading response of millrolled and heat-treated Uniloy 326 (thickness 60 mil) having a residual grain size of 1 to 2μ before shock loading was studied. Uniloy 326 is a two phase (microduplex) alloy consisting of 30% austenite (γ) in a ferrite (α) matrix; with the composition.3% Ti, 1% Mn, .6% Si,.05% C, 6% Ni, 26% Cr, balance Fe.

Comparison of Recovery and Recrystallization in Stainless Steel Following Plane-Wave Shock Loading and Explosive Forming

1970 ◽  
Vol 28 ◽  
pp. 428-429 ◽  
Author(s):  
J. A. Korbonski ◽  
L. E. Murr
Keyword(s):  
Stainless Steel ◽  
Shock Loading ◽  
Pressure Pulse ◽  
Shock Pressure ◽  
304 Stainless Steel ◽  
Strain Rates ◽  
Two Dimensional ◽  
Aisi 304 Stainless Steel ◽  
Aisi 304 ◽  
Explosive Forming

Comparison of recovery rates in materials deformed by a unidimensional and two dimensional strains at strain rates in excess of 104 sec.−1 was performed on AISI 304 Stainless Steel. A number of unidirectionally strained foil samples were deformed by shock waves at graduated pressure levels as described by Murr and Grace. The two dimensionally strained foil samples were obtained from radially expanded cylinders by a constant shock pressure pulse and graduated strain as described by Foitz, et al.

Solid Solution Effects and Deformation Micros trueture of Shock-Loaded Iron Manganese Alloys

1970 ◽  
Vol 28 ◽  
pp. 420-421
Author(s):  
A. Christou ◽  
J. V. Foltz ◽  
N. Brown
Keyword(s):  
Solid Solution ◽  
Shock Loading ◽  
High Strain ◽  
Local Stress ◽  
Strain Rates ◽  
Local Stress Concentration ◽  
Bcc Metals ◽  
Manganese Alloys ◽  
Iron Manganese ◽  
Transmission Microscope

In general, all BCC transition metals have been observed to twin under appropriate conditions. At the present time various experimental reports of solid solution effects on BCC metals have been made. Indications are that solid solution effects are important in the formation of twins. The formation of twins in metals and alloys may be explained in terms of dislocation mechanisms. It has been suggested that twins are nucleated by the achievement of local stress-concentration of the order of 15 to 45 times the applied stress. Prietner and Leslie have found that twins in BCC metals are nucleated at intersections of (110) and (112) or (112) and (112) type of planes.In this paper, observations are reported of a transmission microscope study of the iron manganese series under conditions in which twins both were and were not formed. High strain rates produced by shock loading provided the appropriate deformation conditions. The workhardening mechanisms of one alloy (Fe - 7.37 wt% Mn) were studied in detail.

Fractography, Fracture Toughness and Structural Turbulence Under Low-Temperature Shock Loading of a Nonequilibrium Titanium Alloy Ti–6Al–4V

2020 ◽  
Vol 55 (5) ◽  
pp. 633-642
Author(s):  
I. V. Vlasov ◽  
V. Ye. Yegorushkin ◽  
V. Ye. Panin ◽  
A. V. Panin ◽  
O. B. Perevalova
Keyword(s):  
Fracture Toughness ◽  
Titanium Alloy ◽  
Low Temperature ◽  
Shock Loading ◽  
Temperature Shock ◽  
Structural Turbulence

AISI TYPE S2

Alloy Digest ◽  
1982 ◽  
Vol 31 (12) ◽  
Keyword(s):  
Physical Properties ◽  
Tensile Properties ◽  
Tool Steel ◽  
Shock Loading ◽  
Heat Treating ◽  
Medium Size ◽  
Hard Case ◽  
Large Size ◽  
Steel Mills ◽  
Aisi Type

Abstract AISI Type S2 is a water-hardening tool steel with extreme toughness and resistance to shock loading. Even at a hardness of Rockwell C 59-60, it will bend before it breaks. When hardened in medium-size and large-size pieces, it acquires a hard case and a tough core. Sizes under 3/4-inch (19mm) diameter will water harden to the center. The extreme toughness of Type S2 makes it suitable for use in many applications where no other tool steel will hold up. Its many uses include chisels, rivet busters, spike mauls, screw drivers, punches and sledges. This datasheet provides information on composition, physical properties, hardness, elasticity, and tensile properties. It also includes information on forming, heat treating, machining, and joining. Filing Code: TS-408. Producer or source: Tool steel mills.

Shock loading of fixed flexible thread and orthotropic elastic membrane

2003 ◽  
Vol 3 ◽  
pp. 52-59
Author(s):  
S.S. Komarov ◽  
N.Yu. Tsvileneva ◽  
N.I. Miskaktin
Keyword(s):  
Numerical Methods ◽  
Dynamic Loading ◽  
Elastic Deformation ◽  
Numerical Algorithm ◽  
Shock Loading ◽  
Elastic Membrane ◽  
Wave Dynamics ◽  
Elastic Membranes ◽  
Pneumatic Structures

The main problems of the wave dynamics of flexible filaments and elastic membranes are solved. The reliability of the numerical algorithm proposed by the authors for calculating the elastic deformation of pneumatic structures under dynamic loading is confirmed when compared with the results of known studies obtained by analytical and numerical methods.

Sign in / Sign up

Export Citation Format

Share Document