scholarly journals Analysis of gravity disturbance for boundary structures in the Aegean Sea and Western Anatolia

Geofizika ◽  
2019 ◽  
Vol 36 (1) ◽  
pp. 53-76
Author(s):  
Fikret Doğru ◽  
Oya Pamukçu

Western Anatolia has been shaped N–S-trending extensional tectonic regime and W-E trending horst, grabens and active faults due to the collision of Africa, Arabian and Eurasia plates. The borders of the Aegean Sea tectonic is limited between eastern of Greece, western of Anatolia and Hellenic subduction zone in the south of Crete. To evaluate these tectonic elements gravity disturbance data of the Aegean Sea and Western Anatolia was used in this study. It is thought that the gravity disturbance data reflects the tectonic elements and discontinuities way better than gravity anomaly due to the calculation from the difference between gravity and normal gravity at the same point so thus the tensors and invariants of the study area were calculated and the power spectrum method was applied to the gravity disturbance data. Various boundary analysis methods were applied to the gravity disturbance data to compare the discontinuities obtained from the tensors both theoretical and case study. These methods were tested initially on theoretical data. Within the scope of the theoretical study, a single model and three bodies model were taken into consideration. When the results are examined, it is observed that the Tzz tensor component gives very clear information about the location of the structure. Likewise, when the Txx, Tyy components and invariant results are examined, the vertical and horizontal boundaries were successfully obtained. In addition, the mean depths of these structures were determined using the power spectrum method. In the case application stage, the gravity disturbance data obtained from the Earth Gravitational Model of the eastern of the Aegean Sea and western of Anatolia were evaluated. The tensor and invariants of this gravity disturbance data were first calculated. New possible discontinuities have been identified in the tensors and some of the obtained discontinuities were clarified in their previous discussions. Also, the mean depths of the possible structures were calculated by the power spectrum method at four profiles taken from gravity disturbance data. These depth values are consistent with the depth values of the structural discontinuities obtained from previous studies. Finally, the upward continuation was applied to Tyy, Tyz and Tzz tensors up to 20 km. The positive anomaly values in Tyz and Tzz components and negative anomaly values in Tyy component are consistent with the Western Anatolia Transfer Zone. The structural differences between the eastern and the western of Western Anatolia are noteworthy in the upward continued results of the tensors. In addition, the positive and negative anomalies are notable in areas where the big earthquakes occurred in the last 3 years in the Tyz invariants.

2014 ◽  
Vol 536-537 ◽  
pp. 911-914
Author(s):  
Ning Yang ◽  
Xu Qian

In this paper, Von Karman random media is constructed with power spectrum method. The random media with Von Karman autocorrelation cannot be constructed in time domain but in frequency domain. So power spectrum method is utilized to solve the problem. The spectrum of random function is generated in frequency domain with random field and auto-correlation function. With inverse Fourier transformation, the Von Karman random media model is constructed. With different correlation lengths, six group of Von Karman random media are constructed.


1998 ◽  
Vol 54 (8) ◽  
pp. 961-969
Author(s):  
TETSUO KIDA ◽  
HIDEO OONISHI ◽  
SATORU MATSUO ◽  
KAZUO NOMA ◽  
MASAHIRO YOSHIMURA ◽  
...  

2013 ◽  
Vol 787 ◽  
pp. 423-426
Author(s):  
Kai Xu ◽  
Jing Li ◽  
Gang Du ◽  
Chun Li Zhu ◽  
Peng Fei Li ◽  
...  

A microsphere trapped by optical tweezers moves according to the Brownian motion law, which can be described by the Langevin equation. Based on it, a quadrant photodiode (QD) is used to track the displacement of the microsphere with a diameter of 2.5um trapped by holographic optical tweezers, and power spectrum method is adopted to obtain radial trap stiffness. Experiments show that the trap stiffness increases with the increase of the laser power, and decreases as the distance between the optical trap and the inside bottom surface of the sample cell increases.


2012 ◽  
Vol 182-183 ◽  
pp. 1002-1006
Author(s):  
Wei Yan ◽  
Zhi Hua Chen ◽  
Tai Jiao Du ◽  
Jian Guo Wang

An algorithm is described which simulates atmospheric phase screen (PS) distorted by von Karman atmospheric turbulence by using Zernike expansion of randomly weighted Karhunen-Loeve function. The statistics of the PS generated by using power spectrum method which is most commonly used for generating PS poorly match up with the theoretical structure function, especially at low spatial frequency, while the algorithm described in the this paper can compensate for this shortcoming. And the accuracy of the PS is verified by comparing with the theoretical results. Furthermore, comparing with the existed methods which also use the Zernike expansion to simulate PS, algorithm presented in this paper is more accurate because the effects of the finite outer scale L0.is included


Author(s):  
Emre Timur ◽  
Coşkun Sarı

AbstractThe Dikili geothermal area, in the northern part of Izmir province, is one of the best known geothermal areas in Western Anatolia. This study attempts to analyze and interpret Bouguer gravity data to determine average structural depth values and assess geothermal resources using the Radial Amplitude Spectrum Method (RASM), based on 2D Fast Fourier Transform (FFT) analysis. We selected four different areas to apply the method. The greatest advantage of this method over the conventional power spectrum method is that it can determine the mean depth from 2D FFT spectra, not using a single cross-section taken in one direction. Thus, the user can select an area rather than a direction and average depth can be determined more accurately. The results show that average depth values of the top of the reservoir vary between 314 and 640 m in the region.


1998 ◽  
Vol 43 (17) ◽  
pp. 1447-1452
Author(s):  
Yongjun Li ◽  
Zunsheng Cai ◽  
Yanni Li ◽  
Dahai Song ◽  
Hao Song ◽  
...  

1985 ◽  
Vol 14 (1) ◽  
pp. 25-30 ◽  
Author(s):  
I Kashima ◽  
B M Gratt ◽  
S C White

1999 ◽  
Vol 14 (2) ◽  
pp. 319-322 ◽  
Author(s):  
K. Venkatesh ◽  
M. S. Bobji ◽  
S. K. Biswas

The roughness of metallic surfaces generated by machining depends on the intended intervention by the tool and the inadvertent consequences determined by the response of metals. The roughness generated in four different metals by grinding is studied using the power spectrum method. It was found that the level of power is determined by the intended intervention such as the depth of cut and, to some extent, by hardness because of its possible influence on micropileup geometry. The power gradient is, however, influenced by inadvertent damage which may be related to material properties such as thermal conductivity and adhesion.


Sign in / Sign up

Export Citation Format

Share Document