scholarly journals Growing season climate affects phenological development, seed yield and seed quality of dill (Anethum graveolens)

2022 ◽  
Author(s):  
Ozlem Alan ◽  
Damla Kanturer ◽  
Alison A. Powell ◽  
Hulya Ilbi
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Production Environment ◽  
Anethum Graveolens ◽  
Yield And Quality ◽  
Flowering Initiation ◽  
Mean Germination Time

Dill seed production was investigated over two seasons, comprising a spring growing cycle (SGC) and an autumn growing cycle (AGC). The effects of growing cycle on phenological traits, yield and quality of dill seeds formed on different umbels of the mother plant were investigated. Significant differences were noted in the flowering period, seed yield and quality parameters. The SGC resulted in a shorter time from sowing to bolting and flowering initiation compared with the AGC. Plant height, number of umbels/plant, number of umbelets/umbel, umbel diameter, umbel length and seed weight/plant increased in the AGC. In contrast, decreased germination at 20/30°C and at 13°C, and increased mean germination time at 20/30°C in AGC indicated lower seed quality compared with SGC. Primary umbels produced the best yield and higher quality seeds, followed by the secondary umbels while tertiary umbels gave poor yield and quality seeds in both SGC and AGC. In conclusion, AGC was advisable for higher seed yield, but SGC resulted in higher seed quality compared with the AGC. This highlights the need to select a suitable growing cycle to guarantee high seed yield and quality for each seed production environment.

scholarly journals Effect of head decapitation and planting density on quality seed production of sprouting broccoli (Brassica oleracea var. italica L.)

2015 ◽  
Vol 7 (1) ◽  
pp. 471-476 ◽  
Author(s):  
D.K. Mehta ◽  
Tarun Singh ◽  
Rajesh Kanwar
Keyword(s):  
Brassica Oleracea ◽  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Planting Density ◽  
Plant Spacing ◽  
Yield And Quality ◽  
Number Of Branches

A study was carried out to evaluate the effect of head decapitation and planting density on plant growth, seed yield and quality of sprouting broccoli, Brassica oleracea var. italica L. using cultivar ‘Green Head’. The twenty treatments comprised of combinations of four head decapitation methods viz., D1 (decapitation of primary head at appearance and harvesting seeds from secondary heads), D2 (decapitation of primary head at marketable stage and harvesting seeds from secondary heads), D3 (removal of secondary heads at appearance and harvesting seeds primary head) and ‘D4’ (No decapitation- control) and five planting densities viz., S1 (60x60 cm), S2 (60x45 cm), S3(45x45 cm), S4 (60x30 cm), and S5 (45x30 cm). Decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) and planting density S3 (45x45 cm) independently as well as in combination gave highest seed yield per plot and per hectare. This combination was also found comparable to other combinations for other characters like days to 50% flowering, days to seed harvesting, plant height at harvesting (cm), number of branches per plant, number of siliqua per plant, siliqua length (cm), number of seeds per siliqua and seed quality parameters. Therefore, it is suggested that decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) in combination with plant spacing of 45x45 cm i.e. D1S3 can be recommended for commercial seed production of sprouting broccoli.

scholarly journals Effect of Planting Windows for Seed Production of Soybean (Glycine max L.) in off Season under Kaylan Karnataka Region

2020 ◽  
pp. 130-138
Author(s):  
K. Lokesh ◽  
. Basavegowda ◽  
Mallikarjun Reddy ◽  
. Siddaram ◽  
P. D. Suhas ◽  
...  
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Agricultural Research ◽  
Research Station ◽  
Planting Time ◽  
Agricultural Research Station ◽  
Yield And Quality ◽  
Sowing Dates

Aim: To identify the best planting time for obtaining higher seed yield and quality of Soybean in off season. Study Design: Randomized completely block design (RCBD) Place and Duration of Study: Agricultural Research Station, Halladkere, Bidar, Karnataka between 2016 and 2017. Methodology: A field experiment was conducted at Agricultural Research Station, Halladkere, Bidar to find out the best off season planting time for quality seed production of Soybean. The certified seeds of soybean varieties, JS-335 and Dsb-21 were sown with recommended package of practices at appropriate field condition from November to February at every fortnight with a spacing of 30 cm X 10 cm. The quality parameters related to seed were carried out in the laboratory of seed science department. Further, soybean seeds were treated with fungicide (carbendazim 25% + mancozeb 75%) at the rate of 3 gram per kg of seeds. Results: From the present investigation, it was observed that among the different sowing dates, soybean varieties (JS 335 and DSb 21) sown during 1st fortnight of November recorded significantly higher plant growth parameters as well as seed yield followed by 2nd fortnight of November during off season. Further, climatic factors like rainfall, maximum and minimum temperature and relative humidity played a major role in the off season to produce higher seed yield and quality of Soybean. Conclusion: Among various sowing dates, November 1st Fortnight sowing resulted in highest seed yield with better seed quality in both cultivars (JS-335 and Dsb-21) of soybean.

Effect of organics on seed yield and quality of green gram (Vigna radiata L.

2016 ◽  
Author(s):  
Ashok S Sajjan ◽  
A Fazulla Shariff ◽  
L B Nagaraj ◽  
S Giresh Palankar ◽  
H B Babalad
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Seed Quality ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Green Gram ◽  
Flower Initiation ◽  
Foliar Sprays ◽  
Yield And Quality

A field experiment was conducted on clay textured soil during Kharif season of 2013 to study the effect of soil amendments and organic foliar sprays on crop growth, seed yield and quality of green gram (Vigna radiata L.). The soil application of organic manures and liquid organic foliar sprays at flower initiation and 15 days after flowering (DAF) significantly enhanced the seed yield and seed quality parameters of green gram. Application of FYM (1/3)+ Vermicompost (1/3) + glyricidia leaf manure (1/3) equivalent to 100% RDP and foliar spray of panchagavya (3%) at flower initiation and 15 DAF recorded significantly more number of pods per plant (21.27), pod length (10.25 cm), number of seeds per pod (12.10), seed yield (12.89 g/plant) and seed yield (1263.68 kg/ha) with concomitant higher seed quality parameters like 100 seed weight (5.86 g), seed germination percentage (95.67 %), shoot length(16.53cm) root length (18.25 cm), seedling vigour index (3308) and protein content (23.79 %) as compared to other treatment combinations and control.

Effect dates of sowing and cutting time on seed yield and quality of alfalfa (Medicago sativa L.) CV. RL-88

2017 ◽  
Vol 51 (05) ◽  
Author(s):  
P.R. Arvind Kumar ◽  
B. C. Channakeshava ◽  
R. Siddaraju
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Seedling Length ◽  
Sowing Dates ◽  
Vigour Index

An experiment was carried to find out the effect of sowing dates and cutting time on seed yield and quality of alfalfa cv. RL-88. The results of the experiment revealed that, the significantly higher seed yield per plant (1.491 g), seed yield per plot (161.07 g) and seed yield (355.00 kg ha-1) was noticed in 15th August sowing and the cutting carried out at 60 days after sowing. Whereas, the seed quality parameters of the resultant seeds viz., highest seed germination (95.00 %), seedling length (13.90 cm), seedling dry weight (412.69 mg) and seedling vigour index (1320) found highest in15th August sowing and the cutting followed at 60 days after sowing.

Post harvest seed quality of greengram as influenced by pre-harvest spray of insecticides

2016 ◽  
Vol 50 (2) ◽  
Author(s):  
B. N. Raghu ◽  
Rai Prashant Kumar ◽  
Basave Gowda ◽  
N. Manjunatha ◽  
Rajeshwari S. Alur
Keyword(s):  
Seed Yield ◽  
Methyl Parathion ◽  
Seed Quality ◽  
Block Design ◽  
Quality Parameters ◽  
Yield And Quality ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Two Factors

The experiment was conducted to study the effect of insecticides and stages of insecticidal sprays on seed yield and yield components in greengram. The investigation was carried out in Department of Genetics and Plant Breeding, during <italic>Kharif</italic> 2012. The experiment was laid in factorial randomized block design (FRBD) consisted of 15 treatment combinations involving two factors with three replications. Among the five test insecticides, spraying of malathion @ 2 ml/l recorded significantly more number of pods/plant (20.75), pod weight (20.45g), seed yield/plant (3.17 g), seed yield/hectare (949 kg) and less percentage of infested pods (5.35%) as well as infested seeds/plant (2.66%). It was followed by nimbicidine and methyl parathion. Whereas reciprocal values for these seed yield parameters were noticed in the unsprayed control plants (16.13, 16.53g, 1.84g, 725 kg, 14.13% and 7.89%, respectively). Similar results were recorded in spraying of insecticides at 20 and 10 Days before harvest compare to 20 or 10 Days before harvest. Interaction effect between insecticides and stages of insecticidal spraying were found non-significant for most of the seed yield and quality parameters.

scholarly journals Effect of zinc and boron on seed yield and quality of onion (Allium cepa L.)

2021 ◽  
Vol 16 (1) ◽  
pp. 87-92
Author(s):  
S. H. Arunkumar ◽  
Jitendra Kumar S. Hilli ◽  
D. S. Uppar
Keyword(s):  
Seed Yield ◽  
Zinc Sulphate ◽  
Seed Quality ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality

The field experiment was carried out in the olericulture unit, MARS, University of Agricultural Sciences, Dharwad during 2019-2020 to study the effect of zinc and boron on seed yield and quality of onion on variety cv. Bhima super at different levels of both basal and foliar application. The treatments consists of soil application of zinc sulphate (5 kg/ha and 10 kg/ ha), Borax (4 kg/ha and 6 kg/ha) and foliar application of zinc sulphate (0.25 % and 0.5 %), Borax (0.1 % and 0.2 %) and control without micronutrient application replicated thrice in a Randomized Block Design. The foliar application was given at 45 days after bulb planting. From the present investigation, a significant increase in seed yield and quality parameters were recorded with foliar spray of zinc sulphate (0.5 %) and borox (0.2 %) viz., seed yield per plant (4.29 g), seed yield per plot (214.13 g) and seed yield per hectare (9.91q/ha). The germination percentage was found maximum from the treatment foliar application of zinc sulphate (0.5 %) (84.8%) and the other seed quality parameters was found best from the treatment foliar spray of ZnSO4 (0.5%) and B (0.2 %) i.e., higher shoot length (8.83 cm), root length (7.21 cm), seedling vigour index (1352) and test weight (3.75 g). The non-significant differences were observed due to influence of soil and foliar application of zinc and boron on electrical conductivity and seedling dry weight.

scholarly journals Effect of cutting frequencies and nitrogen levels on growth, green and seed yield and quality of water spinach (Ipomoea reptans Poir.)

2014 ◽  
Vol 6 (2) ◽  
pp. 545-551
Author(s):  
R. K. Sarkar ◽  
J. C. Jana ◽  
S. Datta
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Fertilizer Application ◽  
Quality Parameters ◽  
Quality Parameter ◽  
Water Spinach ◽  
Nitrogen Levels ◽  
Commercial Cultivation ◽  
Yield And Quality

To study the effect of cutting frequencies and nitrogen levels on growth, green and seed yield and quality of upland water spinach (Ipomoea reptans Poir.) an experiment was undertaken with four cutting frequencies (C0 = no cutting; C1 = one cutting at 45 days after sowing (DAS); C2 = two cutting at 45 and 65 DAS and C3 = three cutting at 45, 65 and 85 DAS) and five nitrogen levels (N0 = no application; N1 = 50 kg/ha; N2 = 100 kg/ha; N3 = 150 kg/ha and N4 = 200 kg/ha). Results revealed that all growth, seed yield and seed quality attributes were found to decrease significantly with higher cutting frequencies, whereas, reverse effects on all physiological attributes, green yield and its quality parameters. On the other hand, nitrogen level (upto 150 kg N/ha) had significant effect and all these parameters. The highest green yield was recorded at three cuttings and 150 kg N/ha individually and also at their interaction (16.34, 12.57 and 17.77 t/ha, respectively). Maximum value of quality parameter like vitamin A (3072.9 μg/100 g) was recorded in one cutting with 150 kg N/hectare, whereas, maximum ascorbic acid was recorded maximum (45.31 mg/100 g) in one cutting without N fertilizer application Maximum net profit of Rs. 114324.00 with B: C ratio of 2.22:1 was obtained with combination of three cuttings and 150 kg N/ha and that may be adopted for its commercial cultivation in medium to upland situation under terai region of West Bengal.

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

Preharvest glyphosate in alfalfa for seed production: Effect on alfalfa seed yield and quality

2003 ◽  
Vol 83 (1) ◽  
pp. 189-197 ◽  
Author(s):  
W. E. May ◽  
H. A. Loeppky ◽  
D. C. Murrell ◽  
C. D. Myhre ◽  
J. J. Soroka
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Seedling Emergence ◽  
Canada Thistle ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Alfalfa Seed ◽  
Medicago Sativa L ◽  
Seed Yields

Preharvest applications of glyphosate have been shown to be effective in controlling Canada thistle in annual crops, but may reduce alfalfa seed yield depending on time and rate of application. The objective of this study was to determine the effect of preharvest applications of glyphosate on subsequent alfalfa seed yield and quality. The effects of timing, 1, 26, 51 and 76% alfalfa seed pod maturity, and rate, 0, 440, 880, 1320, and 1760 g a.i. ha-1, of a preharvest application of glyphosate on alfalfa seed yield and quality in the year of application, and regrowth and seed yield in the following year were determined. The rate of glyphosate applied did not affect seed yield in the application year; however, in the following year, growth and seed yield were reduced as rates increased. Delaying the application of glyphosate increased seed yields in the application year, but decreased alfalfa regrowth and flowering the following year. Germination and seedling emergence were not affected by the rate or timing of the glyphosate. A preharvest application of glyphosate at 1760 g a.i. ha-1 at 76% pod maturity is a viable option in the last year of seed production. Key words: Alfalfa (Medicago sativa L.), glyphosate, abnormal seeds, seed quality, and seedling vigour

Effect of preharvest applications of glyphosate on the drying, yield and quality of canola

2000 ◽  
Vol 80 (2) ◽  
pp. 433-439 ◽  
Author(s):  
A. L. Darwent ◽  
K. J. Kirkland ◽  
L. Townley-Smith ◽  
K. N. Harker ◽  
A. J. Cessna
Keyword(s):  
Brassica Rapa ◽  
Seed Yield ◽  
Seed Quality ◽  
Canola Seed ◽  
Moisture Contents ◽  
Yield And Quality ◽  
Seed Moisture ◽  
Seed Content ◽  
Seed Yields

Potential use of preharvest applications of glyphosate in canola (Brassica rapa L.) in western Canada both as a harvest aid and to control weeds prompted this study. Experiments were conducted from 1988 to 1990 at four locations in the region to document the effectiveness of preharvest applications of glyphosate to enhance canola seed and foliage drydown and to measure the effect of such applications on seed yield and quality. Glyphosate was applied in early August to early September at rates of 0.45, 0.90 and 1.70 kg acid equivalent ha−1 to canola with seed moisture contents ranging from 79 to 12%. Seed and foliage moisture drydown were not enhanced by glyphosate treatment. Glyphosate treatments generally had little or no effect on canola seed yields, seed weight, seed germination, green seed content or oil content except when applied when the pods were green and when seed moisture contents were high. Seed/pod moisture was not a reliable indicator of stage of canola development and thus, should not be used alone as an indicator of when preharvest applications of glyphosate can be applied to canola without decreasing seed yield and quality. Key words: Glyphosate, canola, Brassica rapa L., preharvest application, desiccation, seed quality

Sign in / Sign up

Export Citation Format

Share Document