Effect dates of sowing and cutting time on seed yield and quality of alfalfa (Medicago sativa L.) CV. RL-88

2017 ◽  
Vol 51 (05) ◽  
Author(s):  
P.R. Arvind Kumar ◽  
B. C. Channakeshava ◽  
R. Siddaraju
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Seedling Length ◽  
Sowing Dates ◽  
Vigour Index

An experiment was carried to find out the effect of sowing dates and cutting time on seed yield and quality of alfalfa cv. RL-88. The results of the experiment revealed that, the significantly higher seed yield per plant (1.491 g), seed yield per plot (161.07 g) and seed yield (355.00 kg ha-1) was noticed in 15th August sowing and the cutting carried out at 60 days after sowing. Whereas, the seed quality parameters of the resultant seeds viz., highest seed germination (95.00 %), seedling length (13.90 cm), seedling dry weight (412.69 mg) and seedling vigour index (1320) found highest in15th August sowing and the cutting followed at 60 days after sowing.

scholarly journals Development of priming technology for enhanced planting value of seeds in kabuli chickpea (Cicer arietinum L.)

2021 ◽  
Vol 13 (2) ◽  
pp. 735-743
Author(s):  
Umesh Hiremath ◽  
Basave Gowda ◽  
Lokesh G.Y . ◽  
B. S. Ganiger
Keyword(s):  
Root Length ◽  
Seed Quality ◽  
Dry Weight ◽  
Germination Percentage ◽  
Quality Parameters ◽  
Shoot Length ◽  
Growth And Yield ◽  
Seedling Vigour ◽  
Seedling Length ◽  
Vigour Index

The continuous rise in global population demands more food production under limited land resources accompanied by climate change. More oversupply of quality seeds to meet ever-growing food demand is a highly challenging task. Seeds with low vigour level limit the growth and yield of crops at varied field conditions. Hence, an experiment was conducted to develop a technique for the fast and homogeneous growth of kabuli chickpea seeds. The priming treatments evaluated in the present study enhanced the various seed quality parameters of kabuli chickpea significantly when compared to control. Hydro-priming for 4 hours (at 20°C) and air drying for 72 hours showed better results compared to rest of the treatments both in fresh seeds which recorded higher first count (66.38%), germination (92.50%) root length (11.85 cm), shoot length (6.16), mean seedling length (18.01), dry seedling weight (747 mg), seedling vigour index-I (1665), higher speed of emergence (0.3992) and old seeds with higher first count (61.88%), germination (74.13%) root length (8.15 cm), shoot length (5.85 cm), mean seedling length (14.00 cm), seedling dry weight (611 mg), seedling vigour index-I (1056), higher speed of emergence (0.3814). The aged seeds have recorded 29 % increase in germination percentage in contrast to 8 percent increases in fresh seeds. Kabuli chickpea seeds could be subjected to hydropriming, an affordable, alternative, and eco-friendly technique for improving seed and seedling vigour of kabuli chickpea.

scholarly journals Effect of integrated nutrient management and spacing on seed quality parameters of black gram cv. Lbg-625 (rashmi)

2016 ◽  
Vol 8 (1) ◽  
pp. 340-345
Author(s):  
N. Amruta ◽  
P. J. Devaraju ◽  
Mangalagowri Mangalagowri ◽  
S. P. Kiran ◽  
H. P. Ranjitha ◽  
...  
Keyword(s):  
Electrical Conductivity ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Black Gram ◽  
Seedling Vigour ◽  
Nutrient Levels ◽  
Planting Geometry ◽  
Seedling Length ◽  
Vigour Index

A field experiment was conducted to assess the response of nutrient levels and spacing on seed quality attributes of black gram cv. LBG-625 (Rashmi). Experimental results revealed that fertilizer application of 50:100:100 + Black gram rhizobia (250 g ha-1) + PSB- Bacillus megaterium (250 g ha-1) recorded highest test weight (39.27 g), germination (90.60%), root length (15.77 cm), shoot length (13.43 cm), mean seedling length (29.20 cm), mean seedling dry weight (57.99 mg), seedling vigour index-I (2656), seedling vigour index-II (525), total dehydrogenase activity (0.998), protein content (23.16%), field emergence (86.56 %) lowest electrical conductivity (0.813 dSm-1) were superior over other fertilizer treatments. Among the planting geometry 60 x 10 cm recorded more germination per cent (90.48 %) compared to 45 x 10 cm (87.64 %) and 30 x 10 cm (86.91 %). Interaction of nutrient levels and spacing through the application of 50:100:100 + black gram rhizobia (250 g ha-1) + PSB- B. megaterium (250 g ha-1) with planting geometry 60 x 10 cm recorded more mean seedling length (34.40 cm), mean seedling dry weight (58.30 mg),and field emergence (90.24 %) lowest electrical conductivity (0.776 dSm-1) compared to control. The application of 50:100:100 + Black gram rhizobia (250 g ha-1) + PSB- B. megaterium (250 g ha-1) with planting geometry 60 x 10 cm were considered as seed quality improvement approach in blackgram, therefore conjunctive use of inorganic fertilizers and biofertilizer may be suggested for higher seed quality parameters along with overall betterment of crop.

Influence of Seed Biopriming with Microbial Inoculants on Seed Quality Parameters in Soybean [Glycine max (L.) Merril]

2020 ◽  
Author(s):  
Pramod Sharma ◽  
Arun Bhatt ◽  
Rajesh Kanwar
Keyword(s):  
Seed Germination ◽  
Seed Quality ◽  
Dry Weight ◽  
Positive Influence ◽  
Quality Parameters ◽  
Quality Parameter ◽  
Seedling Vigour ◽  
Seed Vigour ◽  
Seedling Length ◽  
Vigour Index

The present investigation was carried out in the Department of Seed Science and Technology, College of Forestry, Ranichauri, Tehri Garhwal, Uttarakhand during 2015. A laboratory experiment was conducted to find out the influence of bio-priming on seed germination and seedling vigour. Seed germination was reported maximum for Psf-173 (93.66%) while minimum was reported for control (65.66%). Seed vigour parameter viz. root length (11.01 cm), shoot length (7.96 cm), seedling length (18.98 cm), fresh weight (8.00 g) and dry weight (1.31 g), vigour index I (1666.80) and vigour index II (115.56) was found higher for PSB treatment. Shilajeet variety had recorded significant higher values for most of the germination and vigour parameters. Shilajeet bio-primed with PSB attained higher values for majority of the quality parameters. Under laboratory condition results suggested that seed germination and seed vigour were greatly affected by different bio-agents. Among all the bio-agents, PSB showed positive influence on most of the quality parameter. However, other bio-agents had also showed significant effect over control.

scholarly journals Effect of zinc and boron on seed yield and quality of onion (Allium cepa L.)

2021 ◽  
Vol 16 (1) ◽  
pp. 87-92
Author(s):  
S. H. Arunkumar ◽  
Jitendra Kumar S. Hilli ◽  
D. S. Uppar
Keyword(s):  
Seed Yield ◽  
Zinc Sulphate ◽  
Seed Quality ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality

The field experiment was carried out in the olericulture unit, MARS, University of Agricultural Sciences, Dharwad during 2019-2020 to study the effect of zinc and boron on seed yield and quality of onion on variety cv. Bhima super at different levels of both basal and foliar application. The treatments consists of soil application of zinc sulphate (5 kg/ha and 10 kg/ ha), Borax (4 kg/ha and 6 kg/ha) and foliar application of zinc sulphate (0.25 % and 0.5 %), Borax (0.1 % and 0.2 %) and control without micronutrient application replicated thrice in a Randomized Block Design. The foliar application was given at 45 days after bulb planting. From the present investigation, a significant increase in seed yield and quality parameters were recorded with foliar spray of zinc sulphate (0.5 %) and borox (0.2 %) viz., seed yield per plant (4.29 g), seed yield per plot (214.13 g) and seed yield per hectare (9.91q/ha). The germination percentage was found maximum from the treatment foliar application of zinc sulphate (0.5 %) (84.8%) and the other seed quality parameters was found best from the treatment foliar spray of ZnSO4 (0.5%) and B (0.2 %) i.e., higher shoot length (8.83 cm), root length (7.21 cm), seedling vigour index (1352) and test weight (3.75 g). The non-significant differences were observed due to influence of soil and foliar application of zinc and boron on electrical conductivity and seedling dry weight.

Effect of integrated nutrient management on seed quality of vegetable soybean [Glycine max (L.) merrill] cv. Karune

2016 ◽  
Author(s):  
J. B. Maruthi ◽  
R. Paramesh
Keyword(s):  
Nutrient Management ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Recommended Dose ◽  
Accelerated Ageing ◽  
Seedling Vigour ◽  
Seedling Length ◽  
Vigour Index ◽  
Ageing Period

A laboratory experiment was conducted at the Department of Seed Science and Technology, GKVK, University of Agricultural Sciences, Bangalore. The results revealed that, application of recommended dose of NPK (30:80: 37.5 kg ha-1) + Recommended dose of FYM (10 t ha-1) +Brady rhizobium (250 g ha-1)+PSB (250 g ha-1) significantly improved the seed quality parameters viz., 100 seed weight (35.51g), seed size (0.76 cm<sup>3</sup>), seed density (1.55 g/cc), total dehydrogenase activity (4.80), germination (92.00 %), seedling length (30.69 cm), seedling dry weight (90.75 mg), seedling vigour index- I and II (2820 and 836 respectively), protein content (36.30 %) and field emergence (89.33 %) with lowest electrical conductivity (0.49 mScm-1) as compared to control and other treatments. Further, artificially aged seeds through accelerated ageing method also recorded higher seed quality parameters in the same treatment at the end of six days of ageing period.

scholarly journals Effect of Aspergillus spp. on Seed Quality Characters of Groundnut

2021 ◽  
Author(s):  
N. Aiswarya ◽  
S.L. Bhattiprolu ◽  
K. Bayyapu Reddy ◽  
G. Rama Rao
Keyword(s):  
Seed Germination ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Aflatoxin Contamination ◽  
Consumer Health ◽  
Seedling Vigour ◽  
Seedling Length ◽  
Vigour Index ◽  
The Impact

Background: Aspergillus niger and A. flavus cause rotting, damping-off, loss in germination and toxification of oil seeds. Aspergillus is a common mold in tropical and Sub-tropical countries and causes aflatoxin contamination. A. flavus and A. niger were responsible for storage rot of groundnut. In addition to storage rot, aflatoxin contamination also leads to adverse effects on consumer health. Therefore, present study was conducted to estimate the impact of both A. niger and A. flavus on seed quality parameters of groundnut. Methods: Effect of major seed borne fungi A.niger and A. flavus on seed quality characters of thirteen different genotypes of groundnut was observed in the present study. All the seedling quality characters were measured as per ISTA guidelines. Result: On an average A. niger caused 25.14, 25.18, 43.99, 26.20 and 44.75 per cent reduction in seed germination, seedling length, seedling vigour index I, seedling dry weight and seedling vigour index II, respectively, over the control whereas A. flavus caused average per cent reduction of 22.38, 24.23, 41.18, 23.92 and 40.95 in seed germination, seedling length, seedling vigour index I, seedling dry weight and seedling vigour index II, respectively, over the control.

scholarly journals Effect of head decapitation and planting density on quality seed production of sprouting broccoli (Brassica oleracea var. italica L.)

2015 ◽  
Vol 7 (1) ◽  
pp. 471-476 ◽  
Author(s):  
D.K. Mehta ◽  
Tarun Singh ◽  
Rajesh Kanwar
Keyword(s):  
Brassica Oleracea ◽  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Planting Density ◽  
Plant Spacing ◽  
Yield And Quality ◽  
Number Of Branches

A study was carried out to evaluate the effect of head decapitation and planting density on plant growth, seed yield and quality of sprouting broccoli, Brassica oleracea var. italica L. using cultivar ‘Green Head’. The twenty treatments comprised of combinations of four head decapitation methods viz., D1 (decapitation of primary head at appearance and harvesting seeds from secondary heads), D2 (decapitation of primary head at marketable stage and harvesting seeds from secondary heads), D3 (removal of secondary heads at appearance and harvesting seeds primary head) and ‘D4’ (No decapitation- control) and five planting densities viz., S1 (60x60 cm), S2 (60x45 cm), S3(45x45 cm), S4 (60x30 cm), and S5 (45x30 cm). Decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) and planting density S3 (45x45 cm) independently as well as in combination gave highest seed yield per plot and per hectare. This combination was also found comparable to other combinations for other characters like days to 50% flowering, days to seed harvesting, plant height at harvesting (cm), number of branches per plant, number of siliqua per plant, siliqua length (cm), number of seeds per siliqua and seed quality parameters. Therefore, it is suggested that decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) in combination with plant spacing of 45x45 cm i.e. D1S3 can be recommended for commercial seed production of sprouting broccoli.

scholarly journals Effect of nitrogen and plant growth regulators on seed yield per plant and seed quality parameters in brinjal (Solanum melongena L.)

2017 ◽  
Vol 9 (4) ◽  
pp. 2338-2343
Author(s):  
Arpana D. Vaja ◽  
J. B. Patel ◽  
R.N. Daki ◽  
Shital A. Chauhan
Keyword(s):  
Seed Yield ◽  
Root Length ◽  
Seed Quality ◽  
Dry Weight ◽  
Germination Percentage ◽  
Quality Parameters ◽  
Shoot Length ◽  
Fresh Weight ◽  
Shoot Dry Weight ◽  
Vigour Index

The present investigation on effect of nitrogen [N0 (Control), N1 (50 kg N/ha), N2 (100 kg N/ha), and N3 (150 kg N/ ha)] and plant growth regulators [G0 (Control), G1 (50 ppm GA3), G2 (50 ppm NAA) and G3 (500 ppm Cycocel)] on seed yield per plant and seed quality parameters in brinjal (Solanum melongena L.) cv. GJB 3 was carried out at the Instructional Farm, Department of Agronomy, Junagadh Agricultural University, Junagadh during kharif 2015-16. The experiment was laid out in field as per randomized block design (Factorial) with three replications. The seed harvested from 16 different treatments combinations replicated thrice from the field were analyzed in the laboratory following completely randomized design (factorial) for various seed quality parameters. Application of nitrogen @ 150 kg N/ha recorded significantly (P<0.05) highest seed yield per plant, shoot fresh weight, root dry weight, shoot dry weight and vigour index – 2 (mass), while application of 100 kg N/ha resulted in significantly (P<0.05) highest germination percentage, root length, shoot length, root fresh weight and vigour index – 1 (length). Application of GA3 at 50 ppm recorded significantly the highest seed yield per plant, germination percentage, root length, shoot length, root fresh weight, shoot fresh weight, root dry weight, shoot dry weight, vigour index – 1 (length) and vigour index – 2 (mass). Among the 16 different treatment combinations, nitrogen @ 150 kg/ha and GA3 50 ppm noted the maximum seed yield per plant, shoot dry weight and vigour index – 2 (mass), while significantly the maxi-mum germination percentage, root length, shoot length, root fresh weight, shoot fresh weight and vigour index – 1 (length) were registered in treatment combination nitrogen 100 kg N/ha and GA3 @ 50 ppm. Therefore, it is advised that application of 100-150 kg of N/ha as a nitrogenous fertilizer and spray GA3 @ 50 ppm (G1) at 45 days after transplanting helps in increasing the seed yield per plant and seed quality parameters in brinjal seed production.

scholarly journals Growing season climate affects phenological development, seed yield and seed quality of dill (Anethum graveolens)

2022 ◽  
Author(s):  
Ozlem Alan ◽  
Damla Kanturer ◽  
Alison A. Powell ◽  
Hulya Ilbi
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Production Environment ◽  
Anethum Graveolens ◽  
Yield And Quality ◽  
Flowering Initiation ◽  
Mean Germination Time

Dill seed production was investigated over two seasons, comprising a spring growing cycle (SGC) and an autumn growing cycle (AGC). The effects of growing cycle on phenological traits, yield and quality of dill seeds formed on different umbels of the mother plant were investigated. Significant differences were noted in the flowering period, seed yield and quality parameters. The SGC resulted in a shorter time from sowing to bolting and flowering initiation compared with the AGC. Plant height, number of umbels/plant, number of umbelets/umbel, umbel diameter, umbel length and seed weight/plant increased in the AGC. In contrast, decreased germination at 20/30°C and at 13°C, and increased mean germination time at 20/30°C in AGC indicated lower seed quality compared with SGC. Primary umbels produced the best yield and higher quality seeds, followed by the secondary umbels while tertiary umbels gave poor yield and quality seeds in both SGC and AGC. In conclusion, AGC was advisable for higher seed yield, but SGC resulted in higher seed quality compared with the AGC. This highlights the need to select a suitable growing cycle to guarantee high seed yield and quality for each seed production environment.

scholarly journals Effect of Planting Windows for Seed Production of Soybean (Glycine max L.) in off Season under Kaylan Karnataka Region

2020 ◽  
pp. 130-138
Author(s):  
K. Lokesh ◽  
. Basavegowda ◽  
Mallikarjun Reddy ◽  
. Siddaram ◽  
P. D. Suhas ◽  
...  
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Agricultural Research ◽  
Research Station ◽  
Planting Time ◽  
Agricultural Research Station ◽  
Yield And Quality ◽  
Sowing Dates

Aim: To identify the best planting time for obtaining higher seed yield and quality of Soybean in off season. Study Design: Randomized completely block design (RCBD) Place and Duration of Study: Agricultural Research Station, Halladkere, Bidar, Karnataka between 2016 and 2017. Methodology: A field experiment was conducted at Agricultural Research Station, Halladkere, Bidar to find out the best off season planting time for quality seed production of Soybean. The certified seeds of soybean varieties, JS-335 and Dsb-21 were sown with recommended package of practices at appropriate field condition from November to February at every fortnight with a spacing of 30 cm X 10 cm. The quality parameters related to seed were carried out in the laboratory of seed science department. Further, soybean seeds were treated with fungicide (carbendazim 25% + mancozeb 75%) at the rate of 3 gram per kg of seeds. Results: From the present investigation, it was observed that among the different sowing dates, soybean varieties (JS 335 and DSb 21) sown during 1st fortnight of November recorded significantly higher plant growth parameters as well as seed yield followed by 2nd fortnight of November during off season. Further, climatic factors like rainfall, maximum and minimum temperature and relative humidity played a major role in the off season to produce higher seed yield and quality of Soybean. Conclusion: Among various sowing dates, November 1st Fortnight sowing resulted in highest seed yield with better seed quality in both cultivars (JS-335 and Dsb-21) of soybean.

Sign in / Sign up

Export Citation Format

Share Document