scholarly journals Effect of zinc and boron on seed yield and quality of onion (Allium cepa L.)

2021 ◽  
Vol 16 (1) ◽  
pp. 87-92
Author(s):  
S. H. Arunkumar ◽  
Jitendra Kumar S. Hilli ◽  
D. S. Uppar
Keyword(s):  
Seed Yield ◽  
Zinc Sulphate ◽  
Seed Quality ◽  
Foliar Application ◽  
Block Design ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality

The field experiment was carried out in the olericulture unit, MARS, University of Agricultural Sciences, Dharwad during 2019-2020 to study the effect of zinc and boron on seed yield and quality of onion on variety cv. Bhima super at different levels of both basal and foliar application. The treatments consists of soil application of zinc sulphate (5 kg/ha and 10 kg/ ha), Borax (4 kg/ha and 6 kg/ha) and foliar application of zinc sulphate (0.25 % and 0.5 %), Borax (0.1 % and 0.2 %) and control without micronutrient application replicated thrice in a Randomized Block Design. The foliar application was given at 45 days after bulb planting. From the present investigation, a significant increase in seed yield and quality parameters were recorded with foliar spray of zinc sulphate (0.5 %) and borox (0.2 %) viz., seed yield per plant (4.29 g), seed yield per plot (214.13 g) and seed yield per hectare (9.91q/ha). The germination percentage was found maximum from the treatment foliar application of zinc sulphate (0.5 %) (84.8%) and the other seed quality parameters was found best from the treatment foliar spray of ZnSO4 (0.5%) and B (0.2 %) i.e., higher shoot length (8.83 cm), root length (7.21 cm), seedling vigour index (1352) and test weight (3.75 g). The non-significant differences were observed due to influence of soil and foliar application of zinc and boron on electrical conductivity and seedling dry weight.

Effect of organics on seed yield and quality of green gram (Vigna radiata L.

2016 ◽  
Author(s):  
Ashok S Sajjan ◽  
A Fazulla Shariff ◽  
L B Nagaraj ◽  
S Giresh Palankar ◽  
H B Babalad
Keyword(s):  
Seed Yield ◽  
Vigna Radiata ◽  
Seed Quality ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Green Gram ◽  
Flower Initiation ◽  
Foliar Sprays ◽  
Yield And Quality

A field experiment was conducted on clay textured soil during Kharif season of 2013 to study the effect of soil amendments and organic foliar sprays on crop growth, seed yield and quality of green gram (Vigna radiata L.). The soil application of organic manures and liquid organic foliar sprays at flower initiation and 15 days after flowering (DAF) significantly enhanced the seed yield and seed quality parameters of green gram. Application of FYM (1/3)+ Vermicompost (1/3) + glyricidia leaf manure (1/3) equivalent to 100% RDP and foliar spray of panchagavya (3%) at flower initiation and 15 DAF recorded significantly more number of pods per plant (21.27), pod length (10.25 cm), number of seeds per pod (12.10), seed yield (12.89 g/plant) and seed yield (1263.68 kg/ha) with concomitant higher seed quality parameters like 100 seed weight (5.86 g), seed germination percentage (95.67 %), shoot length(16.53cm) root length (18.25 cm), seedling vigour index (3308) and protein content (23.79 %) as compared to other treatment combinations and control.

Effect dates of sowing and cutting time on seed yield and quality of alfalfa (Medicago sativa L.) CV. RL-88

2017 ◽  
Vol 51 (05) ◽  
Author(s):  
P.R. Arvind Kumar ◽  
B. C. Channakeshava ◽  
R. Siddaraju
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Dry Weight ◽  
Quality Parameters ◽  
Seedling Vigour ◽  
Yield And Quality ◽  
Seedling Length ◽  
Sowing Dates ◽  
Vigour Index

An experiment was carried to find out the effect of sowing dates and cutting time on seed yield and quality of alfalfa cv. RL-88. The results of the experiment revealed that, the significantly higher seed yield per plant (1.491 g), seed yield per plot (161.07 g) and seed yield (355.00 kg ha-1) was noticed in 15th August sowing and the cutting carried out at 60 days after sowing. Whereas, the seed quality parameters of the resultant seeds viz., highest seed germination (95.00 %), seedling length (13.90 cm), seedling dry weight (412.69 mg) and seedling vigour index (1320) found highest in15th August sowing and the cutting followed at 60 days after sowing.

Post harvest seed quality of greengram as influenced by pre-harvest spray of insecticides

2016 ◽  
Vol 50 (2) ◽  
Author(s):  
B. N. Raghu ◽  
Rai Prashant Kumar ◽  
Basave Gowda ◽  
N. Manjunatha ◽  
Rajeshwari S. Alur
Keyword(s):  
Seed Yield ◽  
Methyl Parathion ◽  
Seed Quality ◽  
Block Design ◽  
Quality Parameters ◽  
Yield And Quality ◽  
Yield Parameters ◽  
Randomized Block Design ◽  
Two Factors

The experiment was conducted to study the effect of insecticides and stages of insecticidal sprays on seed yield and yield components in greengram. The investigation was carried out in Department of Genetics and Plant Breeding, during <italic>Kharif</italic> 2012. The experiment was laid in factorial randomized block design (FRBD) consisted of 15 treatment combinations involving two factors with three replications. Among the five test insecticides, spraying of malathion @ 2 ml/l recorded significantly more number of pods/plant (20.75), pod weight (20.45g), seed yield/plant (3.17 g), seed yield/hectare (949 kg) and less percentage of infested pods (5.35%) as well as infested seeds/plant (2.66%). It was followed by nimbicidine and methyl parathion. Whereas reciprocal values for these seed yield parameters were noticed in the unsprayed control plants (16.13, 16.53g, 1.84g, 725 kg, 14.13% and 7.89%, respectively). Similar results were recorded in spraying of insecticides at 20 and 10 Days before harvest compare to 20 or 10 Days before harvest. Interaction effect between insecticides and stages of insecticidal spraying were found non-significant for most of the seed yield and quality parameters.

​Effect of Foliar Spray of Nutrients, Growth Regulators on Seed Yield and Quality in Hybrid Pigeonpea [Cajanus cajan (L.) Millsp]

2021 ◽  
Author(s):  
Ashok S. Sajjan ◽  
N. Shwetha
Keyword(s):  
Seed Yield ◽  
Growth Regulators ◽  
Cajanus Cajan ◽  
Seed Quality ◽  
Foliar Application ◽  
Foliar Spray ◽  
Quality Parameters ◽  
Hybrid Seed ◽  
Flower Initiation ◽  
Seedling Vigour

Background: The new generation special fertilizers have been introduced exclusively for foliar feeding and fertilization. The increased supply of nutrients and good response by plants resulted in enhanced translocation of nutrients to reproductive structures.Therefore, it is planned to study the effect of different nutrients as a foliar spray for growth, yield and seed quality parameters of hybrid pigeon pea. Methods: The experiment on effect of foliar spray of nutrients, growth regulators on seed yield, quality in hybrid pegionpea [Cajanus cajan (L.) Millsp] was conducted at Seed Farm, College of Agriculture, Vijayapura, Karnataka during kharif 2019-2020. The treatment consisting of foliar spray of control (T1), 1% Pulse magic (T2), 1% 19:19:19 (T3), 0.2% Borax (T4), 50 ppm NAA (T5), 1% Pulse magic+1%19:19:19 (T6), 1% Pulse magic+0.2% Borax (T7), 1% Pulse magic+50 ppm NAA (T8), 1% Pulse magic+1% 19:19:19+0.2% Borax (T9), 1% Pulse magic+ 1% 19:19:19+50 ppm NAA (T10), 1% Pulse magic+1% 19:19:19+50 ppm NAA+0.2% Borax (T11). Foliar spray was taken at flower initiation and peak flowering stage. Result: The results revealed that, foliar application of Pulse magic @1% +19:19:19@1%+ NAA@50 ppm + [email protected]% recorded higher number of branches (10.60), number of pods per plant (239.33), number of seeds per plant (5.75), test weight (12.18g), hybrid seed yield per plant (48.17g), hybrid seed yield per plot (1188.83g), hybrid seed yield per ha (1499kg /ha) and seed quality parameters viz: seed germination (93%), shoot length (15.08 cm), root length (18.67 cm), seedling vigour index(2649), lower electric conductivity (0.59 dSm-1) and protein percentage (22.18 %) respectively.

scholarly journals Plant spacing and pollen quantity on yield and quality of squash seeds

2003 ◽  
Vol 21 (3) ◽  
pp. 443-447 ◽  
Author(s):  
Márcio S. de Lima ◽  
Antonio I. I. Cardoso ◽  
Marcelo F. Verdial
Keyword(s):  
Seed Yield ◽  
Seed Quality ◽  
Block Design ◽  
Fruit Production ◽  
Plant Spacing ◽  
Plant Seed ◽  
Yield And Quality ◽  
Randomized Complete Block Design ◽  
Pollen Quantity

Squash seeds yield and quality can be improved by proper population plant spacing and the pollen quantity, which influences the pollination quality and fertilization. Nine experiments were conducted as a factorial combination of three spacing between plants (0.8 x 0.3, 0.8 x 0.6 and 0.8 x 0.9 m), two quantities of pollen (50% of an anther and another entire one) and natural insect pollination. Seed and fruit production parameters, and seed quality were evaluated. A randomized complete block design, five replications, with ten plants per plot was adopted. Larger plant spacing increased the average number of mature fruits and seed yield per plant. Seed yield was directly proportional to the amount of pollen used during pollination. Higher amounts of pollen resulted in higher seed yield per area, but the plant spacing did not affect this characteristic. Manual pollination, using a whole anther, did not differ from natural pollination in relation to seed yield and quality.

Effect of foliar application of growth activator, promoterand antioxidant on seed quality of soybean

2016 ◽  
Author(s):  
P . Kuchlan ◽  
M. K. Kuchlan ◽  
S. M. Husain
Keyword(s):  
Salicylic Acid ◽  
Seed Yield ◽  
Seed Quality ◽  
Foliar Application ◽  
Foliar Spray ◽  
Soybean Seed ◽  
Seed Vigour ◽  
Filling Stage ◽  
Seed Health

Loss of seed quality in soybean is a serious problem in tropical and subtropical region. Foliar application of salicylic acid (SA), GA3 and acetyl salicylic acid (50 ppm) at seedling and pod filling stage, K2HPO4 (2%), a-tocopherol (100 ppm) at flowering and pod filling stage was done on soybean varieties – NRC 7 and JS 335. Foliar application of SA showed positive effect on seed yield, seed health, germination and seed vigour during storage. Plant height was significantly improved by the GA3 spray in both the varieties. Significantly higher seed yield was obtained with foliar spray of a-tocopherol. Application of SA was found effective to protect plants from various diseases to get quality seed. a-Tocopherol and K2HPO4 treatment significantly reduced MDA production in seeds. a-Tocopherol application increased super oxide dismutase activity as a result the lipid peroxidation of seed during storage was significantly reduced. Application of a-tocopherol, K2HPO4 and salicylic acid improved the storage or keeping quality of soybean seed.

scholarly journals Influence of Ascophyllum nodosum extract, homobrassinolide and triacontanol on fruit retention, yield and quality of mango

2021 ◽  
Vol 42 (4) ◽  
pp. 1085-1091
Author(s):  
A. Dash ◽  
◽  
D. Samant ◽  
D.K. Dash ◽  
S.N. Dash ◽  
...  
Keyword(s):  
Fruit Quality ◽  
Foliar Application ◽  
Block Design ◽  
Ascophyllum Nodosum ◽  
Quality Parameters ◽  
Fruit Weight ◽  
Fruit Growth ◽  
Yield And Quality ◽  
Randomized Block Design

Aim: To evaluate the efficacy of foliar application of Ascophyllum nodosum extract, homobrassinolide, and triacontanol for improving fruit retention, yield, and quality in mango. Methodology: The experiment was laid out in a randomized block design with 10 treatments, comprising Ascophyllum nodosum extract (1000, 3000, and 5000 ppm), homobrassinolide (0.1, 0.3, and 0.5 ppm), triacontanol (1, 3, and 5 ppm), and water as control. Treatments were foliar sprayed at panicle initiation, pea, and marble stages of fruit growth. Observations were recorded on flowering, fruiting, yield, and fruit quality parameters. Results: All the treatments of Ascophyllum nodosum extract and triacontanol exhibited significant improvement in fruit retention, fruit weight, yield, and fruit quality parameters over control. However, 3000 and 5000 ppm Ascophyllum nodosum extract treatments outperformed all the treatments of triacontanol. Plants sprayed with 5000 ppm Ascophyllum nodosum extract recorded the maximum value for fruit retention (48.15, 36.74, 29.48, and 25.76% at 3, 6, 9, and 12 weeks after pea stage, respectively), number of fruits (133.25 per tree), fruit weight (188.84 g per fruit), and yield (25.16 kg per tree), whereas the lowest values were recorded under control. With respect to fruit quality, 3000 ppm ANE produced the fruits with the highest TSS (19.62 °B), whereas the highest TSS/acid ratio was recorded with 5000 ppm ANE (62.29) treatment. Interpretation: In mango, foliar application of Ascophyllum nodosum extract (3000-5000 ppm) thrice at panicle initiation, pea, and marble stages of fruit growth is effective for reducing fruit drop and enhancing quantum and quality of produce.

scholarly journals Effect of head decapitation and planting density on quality seed production of sprouting broccoli (Brassica oleracea var. italica L.)

2015 ◽  
Vol 7 (1) ◽  
pp. 471-476 ◽  
Author(s):  
D.K. Mehta ◽  
Tarun Singh ◽  
Rajesh Kanwar
Keyword(s):  
Brassica Oleracea ◽  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Planting Density ◽  
Plant Spacing ◽  
Yield And Quality ◽  
Number Of Branches

A study was carried out to evaluate the effect of head decapitation and planting density on plant growth, seed yield and quality of sprouting broccoli, Brassica oleracea var. italica L. using cultivar ‘Green Head’. The twenty treatments comprised of combinations of four head decapitation methods viz., D1 (decapitation of primary head at appearance and harvesting seeds from secondary heads), D2 (decapitation of primary head at marketable stage and harvesting seeds from secondary heads), D3 (removal of secondary heads at appearance and harvesting seeds primary head) and ‘D4’ (No decapitation- control) and five planting densities viz., S1 (60x60 cm), S2 (60x45 cm), S3(45x45 cm), S4 (60x30 cm), and S5 (45x30 cm). Decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) and planting density S3 (45x45 cm) independently as well as in combination gave highest seed yield per plot and per hectare. This combination was also found comparable to other combinations for other characters like days to 50% flowering, days to seed harvesting, plant height at harvesting (cm), number of branches per plant, number of siliqua per plant, siliqua length (cm), number of seeds per siliqua and seed quality parameters. Therefore, it is suggested that decapitation of primary head at appearance and harvesting seeds from secondary heads (D1) in combination with plant spacing of 45x45 cm i.e. D1S3 can be recommended for commercial seed production of sprouting broccoli.

scholarly journals Growing season climate affects phenological development, seed yield and seed quality of dill (Anethum graveolens)

2022 ◽  
Author(s):  
Ozlem Alan ◽  
Damla Kanturer ◽  
Alison A. Powell ◽  
Hulya Ilbi
Keyword(s):  
Seed Production ◽  
Seed Yield ◽  
Seed Quality ◽  
Quality Parameters ◽  
Production Environment ◽  
Anethum Graveolens ◽  
Yield And Quality ◽  
Flowering Initiation ◽  
Mean Germination Time

Dill seed production was investigated over two seasons, comprising a spring growing cycle (SGC) and an autumn growing cycle (AGC). The effects of growing cycle on phenological traits, yield and quality of dill seeds formed on different umbels of the mother plant were investigated. Significant differences were noted in the flowering period, seed yield and quality parameters. The SGC resulted in a shorter time from sowing to bolting and flowering initiation compared with the AGC. Plant height, number of umbels/plant, number of umbelets/umbel, umbel diameter, umbel length and seed weight/plant increased in the AGC. In contrast, decreased germination at 20/30°C and at 13°C, and increased mean germination time at 20/30°C in AGC indicated lower seed quality compared with SGC. Primary umbels produced the best yield and higher quality seeds, followed by the secondary umbels while tertiary umbels gave poor yield and quality seeds in both SGC and AGC. In conclusion, AGC was advisable for higher seed yield, but SGC resulted in higher seed quality compared with the AGC. This highlights the need to select a suitable growing cycle to guarantee high seed yield and quality for each seed production environment.

scholarly journals Effect of Foliar Application of Silicon on Yield and Quality of Rice (Oryza Sativa L)

2013 ◽  
Vol 46 (3) ◽  
pp. 21-28 ◽  
Author(s):  
A. Ahmad ◽  
M. Afzal ◽  
A.U.H. Ahmad ◽  
M. Tahir
Keyword(s):  
Oryza Sativa ◽  
Foliar Application ◽  
Oryza Sativa L ◽  
Block Design ◽  
Aerobic Condition ◽  
Quality Parameters ◽  
Index Number ◽  
Yield And Quality ◽  
Significant Difference

Abstract A field experiment was conducted at University of Agriculture, Faisalabad, Pakistan, to investigate the effect of foliar application of silicon on yield and quality of fine rice (Oryza sativa L.). The research was designed as randomized complete block design (RCBD) having three replications and 6m x 4.5m net plot size was maintained. Foliar applications of silicon’s aqueous solution were used as treatments comprised of control, 0.25%, 0.50%, 1.00% silicon solutions. Nursery of 30 days old seedling nursery was transplanted to the plots under aerobic condition and 22.5cm hill to hill distance was maintained. Sodium silicate (20.35% Si) as the source of silicon (soluble in warm water) was used. Fertilizer inputs as nitrogen, phosphorus and potassium were uniformly applied at the rate of 100, 67, 67 kg ha-1 while all other agronomic practices were kept constant for all the treatments. The data from the field (yield components) as well as lab analysis (quality parameters) was recorded according to the standard procedures. Fisher’s analysis of the variance technique was used for statistical analysis and treatment’s mean differences were compared using least significant difference (LSD) test at 5% probability level. Silicon showed no significant effect on plant height, harvest index, number of kernels and opaque kernels percentage. Silicon (0.50% silicon solution) produced maximum grain diameter and grain protein while silicon @ 1.00% silicon solution resulted maximum in number of productive tillers, straw yield, spike per panicle, 1000 grain weight, paddy yield and grain starch. All others parameters have overlapping results of different silicon levels.

Sign in / Sign up

Export Citation Format

Share Document